InfiniteMac OSx86
Page 7 of 30 « First < 56 7 8917 > Last »
Show 50 post(s) from this thread on one page

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   Leopard 10.5 (http://infinitemac.com/forumdisplay.php?f=85)
-   -   Zephyroth Leopard AMD 10.5.2 Rev.2 Issue Discussion (http://infinitemac.com/showthread.php?t=667)

timeflux 03-12-2008 05:40 PM
@zephyroth:

2 tries with the same DVD I burned.

1st try: installation stucked at "about a minute left" mark.

2nd try: installation failed at the final stages.

I'll try to burn another DVD and try to install again.

ASUS M2N-E NForce 570
AMD X2+ 4800
eVGA 8800GT 512MB
80GB IDE/200GB SATA

Thanks

tommy2d 03-12-2008 06:56 PM
Ok guys I really need your help on this one.

I managed to include the kext for my ATA / SATA controller into the DVD using TransMac. Great piece of software BTW. It succesfuly finds my ATA DVD and SATA disk. However, as soon as the installer loads the NTFS driver and detects my NTFS Windows Vista Partiton (which is not active) and echo's it's label, everything hangs. Is there anything i can do to avoid this?

Btw, on my other system, i still get the same error as i did before and i'm sort of giving up on it ever running this release :-(.

Help would be great!

cybland 03-12-2008 07:18 PM
I had a same problem with the new MeDevil's kext. Had to inject the ones from Rev1. In my case the error was caused by my nForce S-ATA RAID not being supported (dev id 00ee) so boot was stuck trying to detect the partition on my RAID array. I've heard that some people had the same issue even with disabled RAID controller. Try booting with -x (safe mode) switch.

Quote:
[cite] tommy2d:[/cite]Ok guys I really need your help on this one.

I managed to include the kext for my ATA / SATA controller into the DVD using TransMac. Great piece of software BTW. It succesfuly finds my ATA DVD and SATA disk. However, as soon as the installer loads the NTFS driver and detects my NTFS Windows Vista Partiton (which is not active) and echo's it's label, everything hangs. Is there anything i can do to avoid this?

Btw, on my other system, i still get the same error as i did before and i'm sort of giving up on it ever running this release :-(.

Help would be great!

BANKAI 03-12-2008 08:47 PM
I have ACPI problem and can't start DVD... :S I burn it with macbook and pc at 4x.

standard 03-12-2008 08:55 PM
hi there, i tried to extract the IOUSB* kext from 10.5.1 release to put them in 10.5.2. rev2.
but in transMAC i donīt find any dir which are kext files are in.. where i have to look for ?!

edit: with IsoBuster i can see the System/Extension directory, but i canīt edit the iso file, any idea

(have to do this under windows ;( )

WinLinMac01 03-12-2008 09:39 PM
does a surprise mean a new ppd patch? =)

Quote:
[cite] zephyroth:[/cite]I think I didn't incorporate MacOSXUpd10.5.2 correctly ...
All problems are related to files in this update.

iChat, Sync Server ...

I need to check this but at the moment I'm working on one of the surprises I promised.

:-)

pαuℓzurrr. 03-12-2008 10:59 PM
Im using MBR for my hdd, could it be from a faulty dvd burn? I'll try to burn it again at a slower speed and see if that solves it...

Quote:
[cite] WinLinMac01:[/cite]You used MBR or GUID?

Quote:
[cite] p-J:[/cite]The dvd finally is able to detect my hd and says it got a boot device, but after that im getting the sam multimedia read write error...

~p-J

WinLinMac01 03-12-2008 11:27 PM
It should work. However, I did hear other users comment about the same multimedia error in other releases. Do a search on the forums, and see where you can get. I never encountered this kind of problem.

Quote:
[cite] p-J:[/cite]Im using MBR for my hdd, could it be from a faulty dvd burn? I'll try to burn it again at a slower speed and see if that solves it...

Quote:
[cite] WinLinMac01:[/cite]You used MBR or GUID?

Quote:
[cite] p-J:[/cite]The dvd finally is able to detect my hd and says it got a boot device, but after that im getting the sam multimedia read write error...

~p-J

demigodz 03-13-2008 12:37 AM
Is it a full 3GB ISO again or just a small ppf patch?

WinLinMac01 03-13-2008 12:44 AM
The total size is 4.38GB. .iso (image)

Quote:
[cite] demigodz:[/cite]Is it a full 3GB ISO again or just a small ppf patch?