Try this:

http://www.4shared.com/zip/iuT7MWvW/...l?refurl=d1url

I'm having trouble getting Lion to boot. I've installed the retail 10.7.4 onto an external hd using my girlfriends MacBook. I then replaced the mach_kernel with the one from this thread and installed Chameleon with Chameleon Wizard. I then plugged the drive internally (SATA) into my PC. I boot it with -v busratio=18 and get stuck with "Still waiting for root device".

http://i267.photobucket.com/albums/i.../th_photo2.jpg

I've been playing with this for the past two days and have run out of ideas.

Salut,

essayes de brancher tes sata comme suit :

http://img15.hostingpics.net/pics/85...13at123618.png

thanks :)

i got the same problem on a chi
truned to ide and added atiata i comiped it to lion
and got panic

I've set it up as you suggested. It goes a bit further than before, but stops here:
http://i267.photobucket.com/albums/i.../th_photo4.jpg

It just stays there.

hello ,

essayes les flags suivant :

UseKernelCache=No
PCIRootUID=1 ou 0
idlehalt=0
-legacy
cpu=1
cpu=2 etc.....
-f
GraphicsEnabler=Yes ou No
-x -v
etc..............

latest kernel working great in Lion 10.7.4 32 bits
Athlon X3 435 :)

looking forward for 64 bits

@ R:A:W:X86

hello,

I'm hard on pa terminal, I tried pacther the kernel with the help of a colleague for the 32/64 bit, but nothing is there.
Have I missed something? thank you for giving me a boost.

traduction google .

http://img15.hostingpics.net/pics/53...a768130929.png


http://img15.hostingpics.net/pics/11...a768122648.png


Merci !!!

bonne nouvelle !!! (Y)

correct usage is:

:)

Merci beaucoup !!

I got it to boot using the FakeSMC.kext file. My problem now is that the computer freezes when I try to install driver pkgs when it says "Optimizing system for installed software...". Also GraphicsEnabler doesn't seem to be working with my gfx (GTS 250 1g). I'm booting with "-v busratio=18". Thanks for the help. I'm almost there:)

@R:A:W:X86

http://img15.hostingpics.net/pics/65...0815230712.png

http://img15.hostingpics.net/pics/43...0815231436.png

http://img15.hostingpics.net/pics/76...0816005554.png

http://img15.hostingpics.net/pics/29...0816005945.png

http://img15.hostingpics.net/pics/70...0816005207.png


whaaaoooo !!!

tu es génial , merci beaucoup , avec l'aide de Nanael de Mac on Pc qui m'a saisi les codes dans terminal à l'aide de team viewer en mode -legacy , j'ai maintenant mon FX 6100 à 100% !!
Encore un grand merci à toi !!!

excuse moi pour le Français .

bizarre ??

normalement , elle est oob avec GraphicsEnabler=Yes .

essayes avec busratio=18 UsekernelCache=No npci=0x3000 PCIRootUID=1 or 0 GraphicsEnabler=Yes
avec le chameleon trunk 1820 avec option SMBIOS Macpro3,1 .

bon courage !!

excuses moi pour le Français . :)

hello ,

et avec -legacy busratio=16 UsekernelCache=No

I've tried the commands you've stated and it causes my computer to stop at a grey screen while it's almost done booting.

I've also tried patching the dyld and libsystem_kernel.dylib files but my computer freezes a few seconds after running update_dyld_shared_cache.

hello,

it is the comnandes our remarkable R:A:W:x86, I've only copied the commands with the patch on the desk and for me, it works very well.
you've got to make a mistake somewhere. I've had no bug when writing in terminal.

For my install I only use two kexts

Extra
Extensions
FakeSMC.kext
NullCPUPowerManagement.kext
modules
klibc.dylib
uClibcxx.dylib
org.chameleon.Boot.plist
smbios.plist



<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SMbiosvendor</key>
<string>AppleInc.</string>
<key>SMbiosversion</key>
<string>MP31.88Z.006C.B05.0802291410</string>
<key>SMboardproduct</key>
<string>Mac-F42C88C8</string>
<key>SMfamily</key>
<string>MacPro</string>
<key>SMmanufacturer</key>
<string>AppleInc.</string>
<key>SMproductname</key>
<string>MacPro3,1</string>
<key>SMserial</key>
<string>G8135543XYL</string>
</dict>
</plist>



<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Kernel Flags</key>
<string>busratio=165 cpu=1</string>
<key>Theme</key>
<string>default</string>
</dict>
</plist>


+ npci=0x3000

les flags are for my CPU (FX 6100)

Can't download Kernels
 

I can't download any of the kernels from xup.in (timeouts).

Can anybody upload them (or at least the latest one) to mediafire or somewhere else?

Cheers...

@gils
I really appriciate your help. I've never seen anybody get past the booting phase with this particular motherboard, so I'm very happy with the progress.:)

The addition of NullCPUPowerManagement.kext has stopped the crashing with pkg installers and update_dyld_shared_cache. I'm still getting a grey screen with GraphicsEnabler=Yes.

Never mind - the links are working again.

hello ,

l'USB3 peut être source de conflit , l'as tu désactivé . aussi , ta carte graphique est branché sur le premier port PCIE ?
également :

CIE = désactivé
S3 = activé
cool n' quiet = pas d'incidence
HPET= activé
o/c= défaut
ram= défaut
USB3= désactivé

normalement pour le reste c'est ok .

excuse pour le français car Google traduction n'est pas très au point . :)

still not allowed when copyes/delete some files....use mach_kernel test30

GA990FXA-UD7
Phenom X6 1090T
Radeon HD 6850
Bart 16 GB Of RAM
Seasonic M12II-620 Bronze

I've set the motherboard as you've written, but I'm still getting the same results.

I had the same problem till I patched only one of the dyld´s!
I don´t remember which of the two I patched, so you will have to try it on your own!

With both files patched I got the same error! I also think I told this here before!

Down To Test
 

Great work you're doing here.
I'm new to Hackintosh and would love to help test

AMD FX-8150
Asus Crosshair V Formula
128gb OCZ Vertex 3 SSD
128gb M4 Crucial SSD
32gb Corsair Vengence DDR3
Custom AMD Liquid Cooling

I have a Macbook Pro and access to Lion.dmg and ML.dmg

I just need instructions for install
I've found these
http://geeknizer.com/install-osx-mou...ackintosh-usb/
and wanted to see if they applied.

Also dl'ed kernel and other files provided in thread.

If you want PM me or idk if you have IRC

Thx

Hi,

Yet for ML 10.8 but you can do an install Lion 10.7 or with unibeast Myhack.

Most of the avaible tutorials for Lion Retail installation on Intel machines should also apply to FX based setups, just that mach_kernel has to be replaced with the patched one & you need to patch sysenter traps after installation & update for 32-Bit software to work. :)

Nice high-end build btw. I have been contemplating one of those Vertex 3 SSDs as they have gotten a little cheaper early this year, but still haven't decided to purchase one...

R:A:W:X86

any plan for Athlon II to work in 64 bits ? or does it have any chance ?

thank u for all work u did, is amazing

@ham4ever

It has been written x times in the current amd threads that it will never work if nobody will write an ssse3 emultator, cause the old amd don´t support it.

thanks man
I'm going to get cracking on this today
ill update with progress and now they have the vertex 4
looks yummy hahaha

I got it working! I had to install the official gfx driver from NVIDIA. Thanks for the help. :)

Hello everybody!!!

So i have successful Lion with iatkos L2 installation in my specs:

PIIX4 965 Revision Deneb C3
M4a77T/USB3.0 (USB3.0 OFF)
HD6870 Dual Fan Barts XT
2x 4GB DDR3 1333Mhz Kingston!
HDD 1TB SATA SEAGATE With 3 Partitions (Snow 1st Lion 2nd Windows 7 3rd)

Well... i can boot in any of the 3 OS without problems and i don't have problem with copy and paste in Lion

Thanks for VERY NICE KERNEL!!

:)

PS: I am a girl u.u. Greetings from Brazil!

Next Step is to Fix my Text Editor Sometimes Wont Open ;(

awesome , did u used iatkos L2 directly, or used Snow leopard to install Iatkos ?

It just has come to my mind: we have patches for AMD, made by bronzovka and rawx86. Using some text tool, can't we just separate the specific AMD instructions by comparing with the vanilla source and then apply them to the Mountain Lion source? Or even better, following and useful advice from Meklort, apply them as a binary patch to the Mountain Lion binary? It would be possible to test it?

If yes, i'm willing to do it and make the experiment. Can someone point me to some text tool that make possible to compare and extract the differences between two texts (these would be the patched kernel and the vanilla kernel) saving me the time to do it by eye, so i can re-patch it and compile it for mountain lion instead?

Can someone explain me what tools and procedures do i use to apply a binary patch to the binary kernel?

The answer is no, it ain't that easy.
The main reason has already been discussed at great length in this thred.
It is, that the current patch works for i386 Kernel only, which is no longer part of Mountain Lion. It can be compiled from the source code, but is actually useless as all the Kernel Extensions are x86_64 only as well.

Also the new XNU comes up with some major code changes.

I am currenlty doing some experiments on this - but you should not expect a working solution - especially not within a short time.

FileMerge - it's part of Xcode.

I'll really beg you to forgive me if i look stubborn right now, RAW, but i was talking about using the 64-bit patched kernel of yours (yes, that one that gives us instant reboots) and apply these patches of yours to the source code (or, even better, to the binary, as meklort advised) of the new XNU (which is also 64-bit, of course) to see what happens.

Let's say i really wanna try it myself and see what happens: what text tools do i use to this task, so i don't have to examine line by line of the code? Thank you very much for answering!

Oops, you did it already! Thank you very much indeed!

hi i have one tutorial in osx86.net in Potuguease.

yes i have used Snow Leopard to install iatkos in another partition (2nd partition) and replaced the kernel and my appleatiata kext for my motherboard and... Azalia HD audio for Audio.

after that you need to upgrade your bootloader to the last version... and the bootflags PCIRootUID=1 -legacy UseKernelCache=No -v -f if your system wont boot at first time try again... if wont boot again ask here in forum i think we can help you :)

Greetings From Brazil!

Reporting back from my experiment: in the end you were right, RAW, as expected btw: it ain't that easy. So the transition to Mountain Lion will be a troubled one for AMD hackintoshes, also as expected.

How are your own experiments doing?

I'm running Lion 10.7.4 and, as i said, it runs just fine on my PC. But 32-bit only, so no Finder and other 64-bit apps (even my CPU being a 64-bit capable CPU; ssse3 is crucial for Lion to support 64-bit apps on 32-bit mode).

With Mountain-Lion, as said in various places, including here, we'll definitely need a ssse3 emulator for non-FX CPUs, but even that won't be enough: until now, we couldn't get a Lion 64-bit kernel to work on AMD CPUs, even Buldozer ones; the maximum we got was 64-bit app support, only on Buldozer CPUs. To run Mountain Lion, we've got to do better than that: we'll need a 64-bit kernel and the ssse3 emulator (a static one, easier than the previous on the fly sse3 emulator, but still no easy a task) for the non-FX CPUs. So the mountain to climb is high indeed.

Yeah but i have a Phenom 965 x4 and i can run any app in my Lion 10.7.4 without Problem i just asking for a problem with Open some apps like a Text Editor and some times i have the problem with Copy and paste.

RAWX86, you will fix this problem in your next version of this kernel?? Thanks :D

Are you really sure of it, Gabriela?

Do you use the stock Finder, or the DP2 Finder instead? Have you tried parallels desktop 7? And the new Xcode, does it work without issues? These are 64-bit apps which should not run by any means on your CPU, since it doesn't support ssse3.

If you made these apps above to work with a Phenom 965 x4, you made a breakthrough discovery and should share your methods... ;)

As for copy/paste and permission bug fixes, read the entire content of this thread and the other at infinitemac, AMD with Lion.

I have a 10.7.3 hackintosh in my fx-6100 and i would love to try this out. Buyt i just cant do it correctly. Sorry, my first mac and hackintosh.

cp /usr/lib/system/libsystem_kernel.dylib ./libsystem_kernel.dylib.orig
./amd_insn_patcher dyld.orig dyld.patched
./amd_insn_patcher libsystem_kernel.dylib.orig

is this suppose to be a one line of 3lines? But eigther way only return "No such file or directory".

i think she run only 32 bit , because she use -legacy ,

It means that your system doesnt find the amd_insn_patcher. In other words you have to copy the dyld files into the same directory as your downloaded amd_insn_patcher. Switch into the directory in your console and then type: ./amd_insn_patcher dyld.orig dyld.patched and press enter. Maybe you didnt rename dyld to dyld.orig? No such file or directory means in this case that one of the binarys isnt found.

okay, so i executed the commands inside the directory where i put the downloaded files (desktop), unfortunately, i could no longer execute the last 2 commands because the i got this mac dead screen. Tried booting back either in single user, safe mode but to no avail. Im just greeted with the dead screen in the login menu. Is there anything i can do to fix this? I followed the instruction and used another command windows, login as administrator by typing sudo su.

Hi guys, thanks to RAWX86 and everyone else that has contributed to this. I have 10.7.4 running with only a few hiccups on a Bulldozer. One of those is that I get nothing when I right click on any file an choose Get Info. Also, I get occasional 30 second slowdowns (spinning beach ball) mostly when browsing the Internet on any Browser. Have done every patch and tweak mentioned on this thread. I initially installed Snow Leopard using Iatkos and have incrementally upgraded from there. I'm using finder from DP2 on latest RAW kernel. Many thanks!

:)

Hello ,

buldo your work in 64 bit, so no need to Finder DP2, and management 32/64 bit, used the AMD patch D'ANV.
For me, it works 100% bug free.


http://osx86.co/f100/10-7-4-amd-kern...87/page32.html

http://osx86.co/f36/legacy-kernel-10...post55947.html

http://osx86.co/attachment.php?attac...5&d=1320876221

Many thanks gils, I restored to original Finder for 10.7.4 using Pacifist and everything seems to be working perfectly! :)