Just follow what gils is talking about... and your problems will be done! :D

Yes i use DP2 Finder... i'll test the finder of 10.7.4 later in 64 bit mode in my own custom kernel later i'll post the screen shots if then works :D

My system already works like a charm, Gabriela! ;)

In 32 bit, like yours. No original Finder, no latest Xcode, no Parallels7 (but i have a workaround to make P6 work in Lion, then this issue is solved as much is i'm concerned).

Is Adobe Photoshop CS6 & illustrator CS6 work?

No, they don't, since the adobe cs6 installer itself needs to run at 64-bit some time after it starts. To have cs6, stock finder and other 64-bit apps running, you'll need either an intel or a bulldozer (fx-series) amd system.

Hi, how did you able to make it work? I been trying this for a while and re-installed atleast 6times because when i try to do as per rawr instruction of patching, my computer would be in kernel panic. I was able to replace the kernel but to make the 32bit apps work, no success. Please help..

I'm not sure if i understand this patching thing altogether. I'll tell you though how i get where i am right now:

1) Installed Snow Leo Hazard 10.6.2 sse2 sse3, then installed Lion in another HD using devout's method: http://www.insanelymac.com/forum/ind...owtopic=278181 (used moderate method);

2) Downloaded 10.7.4 combo update from apple, ran it and changed the kernel before rebooting pretty much like the previous installation, this time using RAW's kernel from first page of this thread;

3) Had the infamous permissions bug, that kept me from everyday tasks like installing programs. Solved it using another kernel from RAW (look for it at this thread);

4) Still had copy and paste issues. To solve this, a) started to use Path Finder app and b) used bronzovka instructions (attention: just the instructions, not the kernel) from this topic: http://www.osx86.net/view/2723-amd_k...or_10.7.4.html
I don't if a), b) or the combination of both is the winner, but the copy and paste issues disappear;

5) I thought these instructions of bronzovka would solve the issue that keeps the core apps from opening x minutes after the startup (so i have to open them all just after logging in or forgetting about them at all) but it doesn't happen. Maybe that is the only dent at the 32-bit perfection of my Lion system.

Hope that helps!
Best regards.

Are the instructions one of the mods/owners of InfiniteMac sent me back in 04-14-2012 the most recent instructions or have they came up with easier ways to install Lion onto Amd Phenom IIx4 965? His instructions was to be on Hackintosh Snow Leopard and edit a DMG iATKOS L2 DMG file with updating its content to be more compatible with AMDs. I got kind of confused and I have messed up several times following his guide. Does anyone happen to have a video guide? I can't screw up a video guide or can I? ^_^

It sucks that ever since my gtx 470 died I can't run snow leopard at 1920x1200 resolution, because I was satisfied with Snow Leopard. But now I'm forced to find a way to get Lion to work with my rig because I believe Lion has support for gtx 570?

Specs:

Amd Phenom II x4 965 3.4ghz
ASUS M4A79XTD EVO
Gigabyte GTX 570
4 gigs ddr3 ram

Oh, that's really pretty tough specially because i still need another hd for the process which i dont really have one at the moment. Second is that, getting a copy of mac os x distro is quite really hard for me because that's ussually 5gb+- to download and i can't find any direct download link for it (like Mediafire), just all torrent which is really slow. But i manage to have this Niresh ditro which is 10.7.3 and I can make it work no sweat for 18 minutes and with everything just fine OOTB (sounds, lan, display), copy/paste and finder are also not an issue.

What really keeps my win7 at the moment is that i cant make it work with 32bit apps like mac office. Ive already quit from installing the update to 10.7.4 in which i really sweat for almost a week re-installing over and over again because I cant really make it work so i just decided to install xcode 4.3 which is the main reason getting that said update.

So, I would really be sticking to mac osx if i could just make this work with 32bit apps because everytime I try those sets of instruction posted here including

would freeze my system and goes kernel panic.

Sir RAWR, what do i missed why i keep getting this same result over and over or shall i really need to have a working 10.7.4 update to use this?

I believe Jhusly and I have same problem. That is why I'm going to erase both my two harddrives with DBAN. Than I'm going to set up Snow Leopard on one of my harddrives and try the method of getting Lion to install on the other harddrive. If I successfully do this, I will than erase only my snow leopard harddrive than I will install Windows 7 again. If Lion disappears when I install Windows 7 on the other harddrive that I erased Snow Leopard off I will use EasyBCD and use that as a dual boot program. I hope I conquered the unconquerable and have solved my issues. Right now I'm backing stuff up on Windows on one of my ext harddrives.

:)

Hi,

What kind of processor you have? for me it works very well.
you to do is the best facility for retail as Intel installation methods.

RAWX86 command is only valid for FX procs which is activate the 32/64 bit at the same time.

The rest I started a tutorial for installing 10.7.4 retail + SHIFT.




http://hack-my-mac.fr/index.php/foru...amd-en-travaux


http://hack-my-mac.fr/index.php/foru...vec-kernel-amd

Since i'm not one of the mods/owners of infinitemac, i don't know. You can try the method i just posted, since i, as you, don't have a ssse3-enabled Bulldozer CPU. It worked for me, maybe it works for you. Installing OsX in general (and Lion particularly) on any kind of AMD machine is never a piece of cake and. There's no AMD-supportive Uni/Multibeast-like method and probably there never will.

I have FX-6100 cpu which is a bulldozer just like RAWR, that's the main reason i keep on trying this to work since he mention that his macosx is now working smoothly after the partch which i am also hoping to do on mine. If i could just make 32bit apps work on mine, i would seriously be moving to mac.

Thanks and i would be checking you tutorial too. ;)

I guess my CPU has a SSE3 enabled in it since its a bulldozer. And as Ive said, getting a copy of any macosx distro is one of the hardest part of this whole process, i just want to make it work what i currently have if possible. :(

http://a1.sphotos.ak.fbcdn.net/hphot...25662108_n.jpg

jhusly, my answer was to Godofwar; checkout his specs (which points to a clearly non ssse3 system - don't confuse it with sse3, please! - because of his phenom CPU):

I should've made it clear, but i didn't notice there was other answers after his, including yours. In fact, i answered you before answering Godofwar, just check out my anterior post. :)

Oh, you already did and answered it, jhusly.

Well, the method i described works with Niresh's distro too, but now i see we have different issues to cope with: my system, non-ssse3, does not work with 64-bit apps. Your system, Bulldozer ssse3, only works with 64-bit apps, so you need the RAW patch to be applied properly. Well, i cannot help you, you'll have to wait for RAW to answer, i'm afraid.

@ jhusly

hello,

what kext you are using for your system?

@ Connatic : sorry about it too man, that was clearly a misunderstanding! ;) And yeah, you are right, we have a contradictory problem. LOL

@gils, i no longer needed to install additional kext like from multibeast since niresh already have it consolidated on his distro but what I selected using his release are :

Chemeleon Bootloader
AMD Kernel
AppleATIATA
VoodooHDA
Ralink Driver for wifi (which dont work because its laucnher is a 32bit application)
Realtek 81xx for LAN (dont know if it really works because i only use broadband stick for connection)
No kext for video and enabler since my graphics works ootb


that's what i remember so far since im here in the office at the moment but ill check it back again later. So, is your system stable now?

@ jhusly



bah!??? What is all this kext??? 're avoiding the distros can be Niresh.
You do a clean install with a retail 10.7.

You deleted your AppleHDA before installing your VoodooHDA?

I managed to do a quick read of your blog with google translate unfortunately i wasnt able to catch everything specially those that are in images since i dont know french. Im gonna check it again when im home.

And thanks!

I really wanted to do a clean install so i would be able to do it from scratch unfortunately I cant get a hand of any virgin 10.7 release, what i have is only Niresh 10.7.3 DVD release and thats what im really trying to make it work. Just to make 32bits apps run and it would sure make my week!

I dont remember AppleHDA being checked as default. Note that i got this options to choose which kext would be included during the installation, not afte because i dont also have an idea what idea realease might look like.

hello ,


http://img11.hostingpics.net/pics/61...0830232934.png

http://img11.hostingpics.net/pics/599905Sanstitre.png

Ive really tried that several times but before i could type in "update_dyld_shared_cache", my system hangs up and go into kernel panic. I either personally type it in or even just copy/paste the commands but im still getting the same error. I try restarting the system after that but it would still give me a kernel panic at the login screen so i have to re-install over again.

:)


normal, si tu mets ton dossier amd patcher sur le bureau, il te Faut rajouter

~ / Desktop / amd blablabla .........



Normally, if you put your file on the desktop amd patcher, you need to add

~ / Desktop / AMD blah .........

oh? What i did is,

"sudo su"
type password
"cd Desktop/amd_insn_patcher_src"
"./amd_insn ......"
does that make a difference? Im really so sorry, im really not good in commands...
but if you would try to look at the picture i posted with the the kernel panic, i think the first sets of commands works as there are patching going on in there...

c'est pour localisé ton dossier amd patcher , pour ton panic , c'est certainement dû au conflit entre AppleHDA et voodooHDA , on installe jamais ces 2 pilotes ensembles , cause de KP .

Excuses moi pour le Français , Google traduit vraiment très mal . :)

I see, so you mean VoodooHDA and AppleHDA kext might have been the reason for conflict that's why its giving me a kernel panic? Okay thanks, i would try to look at it when im back home and do it over again. I hope i get it right this time.

Really thank you for your time. :)

si tu veux faire bien , utilises cette méthode d'installation . :)

http://www.hack-my-mac.fr/index.php/...-travaux#28908


ce sera largement mieux que ces distros pas terrible .

Strange. I always had AppleHDA.kext and VoodooHDA.kext both installed side by side on my system, and never had any problems (AppleHDA doesn't even load). Maybe i'm lucky.

Hi gils,

Ive tried again based on your suggestions but im still getting the same result. There lot of people who were able to succeed using the same trick/command but it just doesnt work on mine and I dont know why? :facefalm:

it's weird anyway??
Can you describe your hardware?

You should reboot with -v -f to locate the error

Hardware :
FX-6100
Asrock 970 Extreme 3
4gbx2 G.Skill Ripjaws
HD 5770
250gb WD

I always do that if i cant boot normally. Everytime doing this, the boot process stops at the last part where its still booting with chameleon background because it is suppose to continue at verbose with only black screen background.

I do not manage to understand what blocking you is always the same kext or you're limited only FakeSMC.kext and NullCPUPowerManagement.kext ?

What do you mean about those two kext? Is there any way we could get a copy of the log during the boot so we would be able to clearly read it and maybe find out any reason of errors?

One more thing, do we also need to install RAWS custom kernel before patching?

Hello,

I send you the historical events since installation, and startup last kernel.log
I can help it.

I always using the kernel RAWX86

good luck

avec un DSDT.aml

npvhash=4095
PAE enabled
64 bit mode enabled
rtclock_init: Taking bus ratio path 0 (Boot-time argument)
TSC: Reported FSB: 0.0000MHz, corrected FSB: 200.679830MHz
TSC: Verification of clock speed failed. Fallback correction was performed. Please upgrade bootloader.
TSC: Frequency = 3311.217196MHz, FSB frequency = 200.679830MHz, bus ratio = 16.5
Darwin Kernel Version 11.4.0: Mi 18 Jul 2012 02:24:10 CEST; bronzovkAnVoodoo v0.9.30:xnu-1699.26.8/BUILD/obj/RELEASE_I386
vm_page_bootstrap: 1004426 free pages and 35958 wired pages
zone leak detection enabled
standard timeslicing quantum is 10000 us
mig_table_max_displ = 73
warning: skipping personalities in blacklisted kext com.apple.driver.AppleIntelCPUPowerManagement
NullCPUPowerManagement::init: properties=0x7ee4600
NullCPUPowerManagement::start
AppleACPICPU: ProcessorId=7 LocalApicId=7 Disabled
AppleACPICPU: ProcessorId=8 LocalApicId=8 Disabled
AppleACPICPU: ProcessorId=1 LocalApicId=16 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=17 Enabled
AppleACPICPU: ProcessorId=3 LocalApicId=18 Enabled
AppleACPICPU: ProcessorId=4 LocalApicId=19 Enabled
AppleACPICPU: ProcessorId=5 LocalApicId=20 Enabled
AppleACPICPU: ProcessorId=6 LocalApicId=21 Enabled
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

MAC Framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x21 Vectors 64:87
IOAPIC: Version 0x21 Vectors 88:119
ACPI: System State [S0 S3 S4 S5]
PFM64 (44 cpu) 0xfff10000000, 0xf0000000
[ PCI configuration begin ]
[ PCI configuration end, bridges 5 devices 22 ]
RTC: Only single RAM bank (128 bytes)
RTC: lost battery power - time may be invalid
HPET: probeHPET() failed
FakeSMC: opensource SMC device emulator by netkas (C) 2009
FakeSMC: plugins & plugins support modifications by mozodojo, usr-sse2, slice (C) 2010
FakeSMCDevice: 17 preconfigured keys added:
FakeSMCDevice: successfully initialized
HDAEnabler: Copyright (c) 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
mbinit: done [64 MB total pool size, (42/21) split]
Pthread support ABORTS when sync kernel primitives misused
USBF: 1.519 AppleUSBEHCI[0x82bc000]::CheckSleepCapability - controller will be unloaded across sleep
USBF: 1.743 AppleUSBEHCI[0x82bc800]::CheckSleepCapability - controller will be unloaded across sleep
USBF: 1.744 AppleUSBEHCI[0x82c5800]::CheckSleepCapability - controller will be unloaded across sleep
HDAEnabler: Copyright (c) 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
com.apple.AppleFSCompressionTypeDataless kmod start
USBF: 1.796 AppleUSBOHCI[0x806c000]::CheckSleepCapability - controller will be unloaded across sleep
USBF: 1.807 AppleUSBOHCI[0x826d800]::CheckSleepCapability - controller will be unloaded across sleep
USBF: 1.807 AppleUSBOHCI[0x826d000]::CheckSleepCapability - controller will be unloaded across sleep
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless load succeeded
com.apple.AppleFSCompressionTypeZlib load succeeded
rooting via boot-uuid from /chosen: 04C30A2C-DEE5-3D12-9834-DD86E8F6E7F8
From path: "uuid", Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
USBMSC Identifier (non-unique): 07951B028D6D0048 0x13fe 0x3100 0x110
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@180000/AppleACPIPCI/SATA@11/AppleAHCI/PRT4@4/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/ST3160812AS Media/IOGUIDPartitionScheme/Sans titre 1@2
BSD root: disk1s2, major 14, minor 4
jnl: unknown-dev: replay_journal: from: 6996992 to: 1933824 (joffset 0x257000)
USBF: 7.626 AppleUSBOHCI[0x7819000]::CheckSleepCapability - controller will be unloaded across sleep
jnl: unknown-dev: journal replay done.
hfs: Removed 8 orphaned / unlinked files and 17 directories
macx_swapon SUCCESS
Waiting for DSMOS...
Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1
Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200
SMC::smcReadKeyAction ERROR $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0
Previous Shutdown Cause: 3
SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
jnl: disk1s3: replay_journal: from: 6466048 to: 23040 (joffset 0x253000)
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPower Management) timed out
WARNING: IOPlatformPluginUtil : getCPUIDInfo unknown CPU family: family 0x15, model 0x1
-- power management may be incomplete or unsupported
DSMOS has arrived
** Device in slot: SLOT--1 **
AppleRTL8169Ethernet: Ethernet address
jnl: disk1s3: journal replay done.

Hi gils!

Ive tried once again hoping i would be lucky this time but i still get the same result. My system went into kernel panic after applying mad_insn patch. I also tried RAWX kernel posted in the first page but my system slows down terribly. Maybe the problem in the distro release itself and i would be stuck having a lion 10.7.3 with only 64bit support.

I'm still downloading the torrent you gave but i can't even get close to 5% because its so slow.

Anyway, thank you so much for you effort responding to me. :)

@ Gils
I saw you took the HDA-Enabler on your System, is it working?
The reason why i ask is that i don´t saw a AMD-System until now where it was working.

:)


No, HDEnabler does not work, I tried the patched DSDT patch with the ALC 892 without result, I just info for the presence of audio in Audio (integrated)

I only have two harddrives in my computer. One of them is installed with Windows 7 and the other isn't installed with anything. If I partition the other one and make it into two different drives can I install hackintosh snow leopard onto it than install lion and put the amd kernel in it or would this cause too many problems? I think I did this in the past and I ended up messing up my entire computer. Keep in mind I use EasyBCD program to dual boot Windows 7 and Hackintosh Snow Leopard because I've never been able to dual boot both of these operating systems without EasyBcd.

Raw, what about your Mountain Lion experiments? Any success?

I don't know if i said it before, but thank you for the FileMerge tip.

So i would delete the kext if it is not working.

in fact, I'd make it work, it must be a story devid, it would be interesting to develop the kext.

works how your ALC 888 ? with VoodooHDA ?

The problem is not the device id (it´s correct), the problem also appear if you inject it with dsdt on every amd system i tried. On Intel it was with the same device id no problem.

The only way to get it work is VoodooHDA.

:)

one thing I do not understand the devid is the same for 2.7.2 and VoodooHDA ALC 892 ?? how is it that VoodooHDA malfunctioning but it works ?


HDAE ALC 892 :


</dict>
<key>IOClass</key>
<string>HDAEnabler</string>
<key>IOPCIClassMatch</key>
<string>0x04030000&amp;0xffff0000</string>
<key>IOProbeScore</key>
<integer>600</integer>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
</dict>



voodooHDA :


<key>VoodooHDA</key>
<dict>
<key>CFBundleIdentifier</key>
<string>org.voodoo.driver.VoodooHDA</string>
<key>IOClass</key>
<string>VoodooHDADevice</string>
<key>IOMatchCategory</key>
<string>VoodooHDADevice</string>
<key>IOPCIClassMatch</key>
<string>0x04030000&amp;0xffff0000</string>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>IOUserClientClass</key>
<string>VoodooHDAUserClient</string>
<key>InhibitCache</key>
<true/>
<key>MixerValues</key>
<dict>
<key>iGain</key>
<string>90</string>
<key>iMix</key>
<string>0</string>
</dict>
<key>NodesToPatch</key>
<array>

[quote=gils;58714]:)

one thing I do not understand the devid is the same for 2.7.2 and VoodooHDA ALC 892 ?? how is it that VoodooHDA malfunctioning but it works ?


HDAE ALC 892 :


</dict>
<key>IOClass</key>
<string>HDAEnabler</string>
<key>IOPCIClassMatch</key>
<string>0x04030000&amp;0xffff0000</string>
<key>IOProbeScore</key>
<integer>600</integer>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
</dict>



voodooHDA :


<key>VoodooHDA</key>
<dict>
<key>CFBundleIdentifier</key>
<string>org.voodoo.driver.VoodooHDA</string>
<key>IOClass</key>
<string>VoodooHDADevice</string>
<key>IOMatchCategory</key>
<string>VoodooHDADevice</string>
<key>IOPCIClassMatch</key>
<string>0x04030000&amp;0xffff0000</string>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>IOUserClientClass</key>
<string>VoodooHDAUserClient</string>
<key>InhibitCache</key>
<true/>
<key>MixerValues</key>
<dict>
<key>iGain</key>
<string>90</string>
<key>iMix</key>
<string>0</string>
</dict>
<key>NodesToPatch</key>
<array>[/QUOTE

The device id is not the same, in this kexts a hole id range is selected.
Normaly VoodooHDA should work out of the box, of course just if you delete the other enabler....
The device id of my soundcard is 4383.

Got to boot my lion 10.4 on amd penom
 

I got my lion 10.4 up on the mad phenom ,now getting a circle with a cross on all 64 bit application s,on licking it says "You can't open the application AutoCAD 2013 because it is not supported on this type of mac"
Also flash movie are crashing out .Please advice how to fix this ,eveything else is working fine.

:)

http://www.insanelymac.com/forum/ind...owtopic=278181

*looool*
Lion doesn´t work on old AMD in 64 bit mode, so there is no fix for it. (Just new Bulldozer works in it)
So you have to find a 32 bit alternative if you want to use Lion. (or write a ssse3 emulator) :D

http://www.insanelymac.com/forum/ind...&#entry1854002

Lion 10.7.5 update is out! Has anyone tried to boot it with RAW's 10.7.4 kernel?

What do the Cupertino guys want to suggest us with that unusual version number?^^
Could be understood like a cut down on Lion internal development.

As for AMD: Using 11.4.0 XNU on 10.7.5 appears to be no problem to me so far. :)

Anyway I will most likely compile that new Kernel with the current patch, short time after Apple releases the source code...

Tried 10.7.5,too. It´s kind of unstable on my system!
Itunes for example freezes all the time while loading and the system itself freezes for seconds from time to time.

I´m looking forward to a new kernel though i´m not in hurry, because my 10.7.4 works great :)

Think positive.
As long as they don't remove support for YouTube, as they did for iOS... XD :p