What's wrong with my system? I installed 10.7.3 on fx-6100 but i cannot do the following :

- update to 10.7.4 would cause the system on continuous reboot
- using RAWX legacy kernel would make the system so sluggish
- applying amd_insn_patcher cause kernel panic before updating dyld shared cache and everytime after system loads.

Is there any kext in conflict with the update?

http://sphotos-d.ak.fbcdn.net/hphoto...25180506_n.jpg
http://sphotos-f.ak.fbcdn.net/hphoto...22592141_n.jpg

salvation,

deleted everything that is susceptible to not spend Update:

sleepenabler
VoodooHDA
HDAE RTL 8xxx
etc. ............
and any other kext that you have added.
prefer mkext in E / E + HDD root DSDT if necessary, I went in 11.5 without any problem, think AppleFileSystemDriver.kext replace the kernel and repair permissions with Disk Utility.

google traduction

je suis passé en version 11.5 !!! ^_^^_^^_^

http://img15.hostingpics.net/pics/70...76844153PM.png

I'm only using a distro release by niresh. I dont know what are the other kext to be removed that might had caused my issues.

If anyone would be nice enough for me to take a look at this list of kext on my system and figure out which one is creating the conflict i would really be gratefull. I already spend more than 2 months with this hackintosh but still can't make it work perfectly and almost feel like giving my fx-6100 up. :'(

http://imageshack.us/a/img155/6948/originalkext.jpg

Also, i tried to install the distro you sent to me by iNDO but I can't make it boot. I'm stuck with "Not an intel platform. Restart fix not applied!!!" :(

Jhusly, i notice you have VoodooHDA, which is mentioned by Gilles.

But i would back up this Niresh installation and resort to something radically different: retail installation using either using MyHack or unibeast/multibeast. Of course, you would have to change the kernel in either one to RAW's, so it manages to boot.

Since you own a Bulldozer, you should be able to install Lion with ease. Niresh's is a distro from which a lot of issues are reported. Distros, in general, are very unreliable material. Maybe you solve all issues with a good retail installation.

Already tried removing several kext from there one by one which I think are irrelevant including voodooHDA as suggested by gils long before but I still end up the same.

I wanted to try to do a clean install using the retail version of LION but i cant find anything from the web not hosted in torrent sites. Torrents are terribly slow in my place. If theres only a non-torrent link I can find then I would just download it from the office where i enjoy 100mbps connection but also block torrent downloads.

:)

hello ,


Why do you spend with crappy distro, look at my signature, you have a tutorial for a retail installation method, if you follow the diferent steps, your hachintosh AMD fonctionnerra perfectly.
You do not need to multimachin tonymachintruc or any other MyHack and install.
you need either a virtual machine on win7 (VTBX) or any distro as iATKOS S3 V2 to prepare your USB key.

google translation


loock !

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>busratio=165 cpu=2 npci=0x3000</string>
<key>Theme</key>
<string>Default</string>
</dict>
</plist>



<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SMbiosvendor</key>
<string>AppleInc.</string>
<key>SMbiosversion</key>
<string>IM121.88Z.0047.B0A.1104221555</string>
<key>SMboardproduct</key>
<string>Mac-942B59F58194171B</string>
<key>SMfamily</key>
<string>iMac</string>
<key>SMmanufacturer</key>
<string>AppleInc.</string>
<key>SMproductname</key>
<string>iMac12,2</string>
<key>SMserial</key>
<string>C02GM1V9DHJP</string>
</dict>
</plist>


Extra
Extensions
FakeSMC.kext
NullCPUPowerManagement.kext
Extensions.mkext
modules
klibc.dylib
uClibcxx.dylib
org.chameleon.Boot.plist
smbios.plist
Themes
Blackosx_BIG
Default
mach_kernel


Accusys6xxxx.kext
acfs.kext
acfsctl.kext
ALF.kext
Apple_iSight.kext
Apple16X50Serial.kext
AppleACPIPlatform.kext
AppleAHCIPort.kext
AppleAPIC.kext
AppleAVBAudio.kext
AppleBacklight.kext
AppleBacklightExpert.kext
AppleBluetoothMultitouch.kext
AppleBMC.kext
AppleEFIRuntime.kext
AppleFileSystemDriver.kext
AppleFSCompressionTypeDataless.kext
AppleFSCompressionTypeZlib.kext
AppleFWAudio.kext
AppleGraphicsControl.kext
AppleGraphicsPowerManagement.kext
AppleHDA.kext
AppleHIDKeyboard.kext
AppleHIDMouse.kext
AppleHPET.kext
AppleHWSensor.kext
AppleIntelCPUPowerManagement.kext
AppleIntelCPUPowerManagementClient.kext
AppleIntelFramebufferCapri.kext
AppleIntelGMA950.kext
AppleIntelGMA950GA.plugin
AppleIntelGMA950GLDriver.bundle
AppleIntelGMA950VADriver.bundle
AppleIntelGMAX3100.kext
AppleIntelGMAX3100FB.kext
AppleIntelGMAX3100GA.plugin
AppleIntelGMAX3100GLDriver.bundle
AppleIntelGMAX3100VADriver.bundle
AppleIntelHD3000Graphics.kext
AppleIntelHD3000GraphicsGA.plugin
AppleIntelHD3000GraphicsGLDriver.bundle
AppleIntelHD3000GraphicsVADriver.bundle
AppleIntelHD4000Graphics.kext
AppleIntelHD4000GraphicsGA.plugin
AppleIntelHD4000GraphicsGLDriver.bundle
AppleIntelHD4000GraphicsVADriver.bundle
AppleIntelHDGraphics.kext
AppleIntelHDGraphicsFB.kext
AppleIntelHDGraphicsGA.plugin
AppleIntelHDGraphicsGLDriver.bundle
AppleIntelHDGraphicsVADriver.bundle
AppleIntelIntegratedFramebuffer.kext
AppleIntelIVBVA.bundle
AppleIntelSNBGraphicsFB.kext
AppleIntelSNBVA.bundle
AppleIRController.kext
AppleKeyStore.kext
AppleKeyswitch.kext
AppleLPC.kext
AppleLSIFusionMPT.kext
AppleMatch.kext
AppleMCCSControl.kext
AppleMCEDriver.kext
AppleMCP89RootPortPM.kext
AppleMIDIFWDriver.plugin
AppleMIDIIACDriver.plugin
AppleMIDIRTPDriver.plugin
AppleMIDIUSBDriver.plugin
AppleMikeyHIDDriver.kext
AppleMobileDevice.kext
AppleMultitouchDriver.kext
ApplePlatformEnabler.kext
AppleRAID.kext
AppleRAIDCard.kext
AppleRTC.kext
AppleSDXC.kext
AppleSEP.kext
AppleSmartBatteryManager.kext
AppleSMBIOS.kext
AppleSMBusController.kext
AppleSMBusPCI.kext
AppleSMC.kext
AppleSMCLMU.kext
AppleSRP.kext
AppleStorageDrivers.kext
AppleThunderboltDPAdapters.kext
AppleThunderboltEDMService.kext
AppleThunderboltNHI.kext
AppleThunderboltPCIAdapters.kext
AppleThunderboltUTDM.kext
AppleTyMCEDriver.kext
AppleUpstreamUserClient.kext
AppleUSBAudio.kext
AppleUSBDisplays.kext
AppleUSBEthernetHost.kext
AppleUSBMultitouch.kext
AppleUSBTopCase.kext
AppleVADriver.bundle
AppleWWANAutoEject.kext
AppleXsanFilter.kext
ATI1300Controller.kext
ATI1600Controller.kext
ATI1900Controller.kext
ATI2400Controller.kext
ATI2600Controller.kext
ATI3800Controller.kext
ATI4600Controller.kext
ATI4800Controller.kext
ATI5000Controller.kext
ATI6000Controller.kext
ATIFramebuffer.kext
ATIRadeonX1000.kext
ATIRadeonX1000GA.plugin
ATIRadeonX1000GLDriver.bundle
ATIRadeonX1000VADriver.bundle
ATIRadeonX2000.kext
ATIRadeonX2000GA.plugin
ATIRadeonX2000GLDriver.bundle
ATIRadeonX2000VADriver.bundle
ATIRadeonX3000.kext
ATIRadeonX3000GA.plugin
ATIRadeonX3000GLDriver.bundle
ATIRadeonX3000VADriver.bundle
ATISupport.kext
ATTOCelerityFC.kext
ATTOCelerityFC8.kext
ATTOExpressPCI4.kext
ATTOExpressSASHBA.kext
ATTOExpressSASHBA2.kext
ATTOExpressSASRAID.kext
ATTOExpressSASRAID2.kext
AudioAUUC.kext
AudioIPCDriver.kext
autofs.kext
BJUSBLoad.kext
BootCache.kext
CalDigitHDProDrv.kext
cd9660.kext
cddafs.kext
CellPhoneHelper.kext
CoreStorage.kext
Dont Steal Mac OS X.kext
DSACL.ppp
DSAuth.ppp
DVFamily.bundle
EAP-KRB.ppp
EAP-RSA.ppp
EAP-TLS.ppp
EPSONUSBPrintClass.kext
exfat.kext
GeForce.kext
GeForce7xxx.kext
GeForce7xxxGA.plugin
GeForce7xxxGLDriver.bundle
GeForce7xxxVADriver.bundle
GeForceGA.plugin
GeForceGLDriver.bundle
GeForceVADriver.bundle
HighPointIOP.kext
HighPointRR.kext
HighPointRR644.kext
IO80211Family.kext
IOACPIFamily.kext
IOAHCIFamily.kext
IOATAFamily.kext
IOAudio2Family.kext
IOAudioFamily.kext
IOAVBFamily.kext
IOBDStorageFamily.kext
IOBluetoothFamily.kext
IOBluetoothHIDDriver.kext
IOCDStorageFamily.kext
IODVDStorageFamily.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
IOFireWireSerialBusProtocolTransport.kext
IOGraphicsFamily.kext
IOHDIXController.kext
IOHIDFamily.kext
IONDRVSupport.kext
IONetworkingFamily.kext
IOPCIFamily.kext
IOPlatformPluginFamily.kext
IOSCSIArchitectureModelFamily.kext
IOSCSIParallelFamily.kext
IOSerialFamily.kext
IOSMBusFamily.kext
IOStorageFamily.kext
IOStreamFamily.kext
IOSurface.kext
IOThunderboltFamily.kext
IOTimeSyncFamily.kext
IOUSBAttachedSCSI.kext
IOUSBFamily.kext
IOUSBMassStorageClass.kext
IOUserEthernet.kext
IOVideoFamily.kext
iPodDriver.kext
JMicronATA.kext
L2TP.ppp
mcxalr.kext
msdosfs.kext
ntfs.kext
NVDAGF100Hal.kext
NVDAGK100Hal.kext
NVDANV40HalG7xxx.kext
NVDANV50Hal.kext
NVDAResman.kext
NVDAResmanG7xxx.kext
NVSMU.kext
OSvKernDSPLib.kext
PPP.kext
PPPoE.ppp
PPPSerial.ppp
PPTP.ppp
PromiseSTEX.kext
Quarantine.kext
Radius.ppp
RealtekRTL81xx.kext
RemoteVirtualInterface.kext
Sandbox.kext
SM56KUSBAudioFamily.kext
SMARTLib.plugin
smbfs.kext
SMCMotionSensor.kext
SoftRAID.kext
System.kext
TMSafetyNet.kext
triggers.kext
udf.kext
webcontentfilter.kext
webdav_fs.kext


c'est tout propre !! ;)

The harddrives that show up on the right side, are they only available on amd 10.7.4 and possibly 10.7.3? I don't get visible harddrives on my desktop with 10.7.2 or is their a kext or pkg file to fix that?

euh !!! ??? c'est quoi la question au juste ?

if this questions is about the HD drives found in the right side of my screencaps. All you have to do is, on finder, click preferences and then you can see options from there. Ticks all the display options for HDD and CD.

Just found a non-torrent link for iATKOS L2 and downloaded it today in the office. I gotta give it a try when i get home. My problem installing using the retail version is that i dont have a Lion retail dmg file.

But thanks again, you've always been a big help to me! ;)

:)

iATKOS L2 why ???

because that's the only one i found in the internet not hosted in torrent sites.

I've tried to install SL using iAtkos S3 V2. It installs but of course I get an instant reboot. I tried to install using OSX INDO 10.7.4. Towards the end of the installation I receive a Failed Install error. I AM able however to boot it up using these flags busratio=18 cpu=1 UsekernelCache=No npci=0x3000 PCIRootUID=1 GraphicsEnabler=Yes -f -v -x I can get into safe mode..but thats about all i can do..I can't install any kernels..kexts..etc. I will say I'm closer than I was a few months ago with this system.


ASUS Sabertooth 990FX Motherboard
AMD FX 8-Core Processor 3.60Ghz
16GB DDR3 RAM AMD Performance Edition
EVGA GeForce GTX 570
Geforce GT 240

for your CG is GraphicsEnabler=No, it seems to me? and let one CG for the install. (GTX 570, for example)

Not quite sure I understand you..but I will try.

Basically what you are saying is just install SL with my GTX 570?
I can take the other card out...
If so I shall give that a try!

http://wiki.osx86project.org/wiki/in..._10.7.2#NVIDIA


:)

I updated to 10.7.5 and now the screen stops updating after [ PCI Configuration begin ]. I found that it continues and if I boot to single user mode I can type 'halt' and the system halts. Any thoughts on where to start looking. Using a AMD FX-8120 on a ASUS M5A97 EVO with a Galaxy GTX 465.

Ok..I've tried yet again to install OS X 10.7.4 INDO.

Success!! However..I am stuck at the same roadblock. I can boot into the system using

busratio=18 cpu=1 npci=0x3000 PCIRootUID=1 -v

any other combination of flags I can boot with too.. like UsekernelCache=No

anyway...when I'm actually in the system I can't for the life of me install ANYTHING! No kexts...packages..nothing! I have a hard drive to swap files between windows and OS X and half the time I can't even copy them over to my OS X drive.

I'm a lot closer to complete system than I was months ago but now I'm just plain stuck...any suggestions??? I'm ALMOST there!!!

This is the permissions bug. Search at this topic for it, RAWX86 posted somewhere in the topic an updated kernel adressing precisely this issue.

Is this updated kernel different from the one on the first post?

npci=0x3000 GraphicsEnabler=Yes

:)

tu mélanges tes problèmes !!

:)

grahfex : what boot flags you used to be able to boot into the installation screen? I have a iNDO 10.7.4 release here but can't boot from it. It always says "Not an intel platform. Restart fix not applied!!"

Thanks. Already Tried both. No joy.

EDIT:
Tried again. This time it worked. Thanks

Nope.
First post is up to date - build 30 from 18 Jul is the latest and only recommended to be used.

:)
effectivement , très bon boulot pour ton kernel , fonctionne également magistralement bien pour Lion 10.7.5 .

:)

Do you guys think I need a different Kernel for my Mach Kernel? Sometimes command -legacy busratio=17 UsekernelCache=No npci=0x3000 PCIRootUID=0 Graphics Enabler=Yes does not work! I'm using Mach Kernel v4 with a Amd Phenom II x4 965 3.4ghz and gigabyte gtx 570 card with 4 gigs of ddr3 ram. Motherboard is Asus M4A79XTD EVO. That or maybe I need a different command. My Hackintosh Lion acts very strange. I have to shut my computer down like 3 times before the command finally works, why the heck would that be?

Godofwar, If you're still using Bronzovka's kernel, you should definitely replace it with R:A:W:X86's kernel from the first post on this page.

Also, you can put all those kernel flags in the <Kernel Flags> section of /Extra/org.chameleon.Boot.plist.

I'm on 10.7.2, I do not want to update because I fear that my hackintosh won't work at all and I'm sick of reinstalling Snow Leopard and setting Lion up all over again. I've done that hundreds of time already. Does R:A:W:X86's work with 10.7.2 or no?

Also, I accidently posted on this topic. :D


Oh yeah, can I replace that kernel while I'm on Hackintosh Lion Or do I have to replace it while I'm on my Windows 7 side? And if I have to do it on my Windows 7 side, what program to you recommend I use so I can read/write to my Mac side?

You can simply rename the RAWX86's kernel to, say, RAW, before putting it at the root of your Lion system. Doing that, you won't need to replace the older one (that's named mach_kernel) and will be able to use it if the things go wrong and RAWX86's kernel doesn't work with your current 10.7.2 installation.

If you do as i advised, just remember to boot using the name you gave to the kernel as a boot flag. If you call it RAW, just type RAW and, just for safety, npci=0x3000 and hit enter. If you want to boot with your older kernel, just doesn't type anything.

if i rename rawx custom kernel to like jhusly, in chameleon boot should i type "-jhusly" or just "jhusly". I have a 10.7.3 installation and tried updating to either 10.7.4 /10.7.5 this time I've gotten a little further than the previous which just restart after the chameleon load some kext. But either way I'm still stuck with "Still waiting for root device." I use RAWX custom kernel on both update and the mach_kernel which works on the 10.7.3. Anyway, I use MacDrive in windows to replace the kernel.

http://imageshack.us/f/405/20121002004.jpg

just "jhusly" (without the quotes, of course).

okay thanks! but how about the "Still waiting for root device", any idea? Tried booting with "npci=0x3000", single user, safemode, legacy but still im stuck on that part.

EDIT : nvm, i'm already able to boot after 10.7.4 update with RAWX custom kernel. Weird because im using bulldozer but instead of 64bit support only, mine is 32bit userland only. I'll try the fix and hope it will be fixed this time! :D

wohow! Couldn't get any happier than this! Finally after few months, already perfected my lion with 10.7.4 update and 32/64bit support! :D

thanks RAWX86 for the kernel and gils :cool:

Congrats! :)

Is there any reason I should update from 10.7.3 to 10.7.4 or no reason and should I just be happy to run 10.7.3 as is? Is 10.7.4 too complicating? I just updated to 10.7.2 to 10.7.3 successfully today. I replaced the finder and machkernel than it worked. But than I had to install official Nvidia drivers which actually worked better than the Nvidia kexts I was using on 10.7.2.

Now i'm satisfied! :D

There's not much to gain from 10.7.3 to 10.7.4 except that it now support the latest xcode and maybe some later apps and those stated by apple in the update but if 32/64bit works perfectly fine and all your application then it doesn't really matter much specially if your previous update is real bloody.

What you did from 10.7.2 to 10.7.3 should be almost the same if not exactly. ;)

10.7.3 seems to run better in flash with official Nvidia drivers. I was using 10.7.2 nvidia kexts to get my gtx 570 to work on 10.7.2 and I had flash freezes at the beginning of most youtube videos. Flash acted weird on 10.7.2 with Nvidia kexts. I believe the official Nvidia drivers worked a lot better. So thumbs up to Apple for not being douches and putting stuff in their official drivers to make it not work right with hackintosh. Tho, some people claim they've had crashes on the official drivers and freezes I have no experienced either one but I've read comments online saying that 570 gtx an 580 gtx works perfectly with official Nvidia drivers. So maybe its certain graphics cards?

That might be the case. Mine, i have xfx hd5770 which is mac osx friendly with the earlier versions unfortunately Lion make it useless if not flashed. So this time i would be getting another card for my hackintosh enough for some editing, i believe xcode dont need much of it.

Anyway to get all 4 or 5 of my speakers to work with Hackintosh Lion 10.7.3 with my Creative X-fi Soundcard? Or am I stuck with 2.1 sound from only 2 speakers? I'm using Voodoo hda the lastest version I believe. Oh yeah, I'm currently using Leopard as my Wallpaper even tho I'm on Lion. I just thought Lion had the ugliest Wallpaper I've ever seen. I think Leopard and Snow Leopard had better looking Wallpaper that gives Hackintosh a better feel for me personally.

http://oi45.tinypic.com/fu0sav.jpg


Edit: I probably should have posted this on the other topic now that I think about it but it seems like more people are responding to this topic for some reason... Maybe people are sick of the zillion questions I have, or just coincidence. :D

^ where's your soundcard installed? USB or PCI?

I don't know, I would think PCI but it could be USB.


Creative Sound Blaster X-Fi Titanium Fatal1ty Professional is my exact sound card, I have a black, light green, and orang plugs plugged into my sound card.

how could you miss that? Were you not the one who installed it in your system?

X-Fi Titanium
Base on that post, your audio seems not to support 5.1 natively. I havent really read the whole part of it.... :P

My soundcard supports 7.1, 5.1, and 2.1 sound. I have the drivers installed and setup for 5.1 on my Windows 7 side and sound comes through all 5 speakers. I never heard of any sound card only supporting one of the surrounds, most sound cards I know support all 3 which this one does atleast on my Windows 7 side. I also didn't set up the card myself, I don't setup any parts in my computer.

opsss, sorry. What i mean is that lion hackintosh does not support it natively as per that page i've posted.

anybody here having a perfectly working appstore / itunes store and were you able to achieve it?

I haven't, doesn't really bother me because I probably wouldn't use them anyways. There's music players you can find online to replace ITUNEs if you wanted music player. I personally use Enqueue. I'm not a big music listener on the computer tho, I usually play my mp3s on my Creative Zen(an mp3 player you probably never heard of). I only use music when I jog/exercise. My brother uses his computer as a music player tho, using Windows Itunes all the time. Enqueue is a good Itunes replacement it looks almost exactly like Itunes.

I´ve got a perfectly running appstore/itunes with 10.7.4 . Bought many apps and so on.

iTunes sound a lot better for me so far since i havent got any other player installed other than vlc and the other video player plus I'm able to use the itunes controller so i could play/skip a song right into my taskbar. Also, Im just using my music collection in my ntfs/windows drive and completely sync it without copying into my mac drive. But my main concern is to be able to use the store.

How were you able to do it? Mind sharing some tips? I tried what i had seen on the net like booting with PCIRootUID=0 or deleting all your network settings and add the ethernet first on the list but that just dont seem to work with me. My connection is mainly by using a 3g/4g stick connected via usb and or wifi and not via lan cable.

Hello,

CPU: Phenom II x2 550BE
MOBO: MSI 790FX-GD80
MEM: 8GB 1333mhz

I having Snow Leopard 10.6.8 and 64bits working very good.

Now having Lion 10.7.2 very buggy :( and update combo to
10.7.4 crash finder, crash graphics card and network.

Having reinstall graphics card and network now working
only have problem network say unplugged cable :S:S having reboot to snow leopard say good cable network huh.

and i think problem that

http://thebassie.dyndns.org/lion174.jpg

And i hope dat you me help and thanks where now can i not internet :S unplugged cable say.

Lion 10.7.4 having work all sure Soud Work and Graphics Work
only network working driver yes only unplugged cable??

no tested 64bits having first internet thant can i downlaod amd ans patcher

is 107.4 stable? of beta testen? and 10.7.3 stable??

I know Snow Leopard is very stable :D