iATKOS v7
 

http://img30.imageshack.us/img30/5669/iatkosv7.png

iATKOS v7 10.5.7 Intel/AMD DVD

you can grab it from tpb..



Attention!

- This DVD is designed for Non-Apple x86 computers (PC). So, do not try to boot it on Apple Hardware!

- This DVD includes Apple's Mac OS X Leopard 10.5.7 (9J61) installation for Intel and AMD CPUs, some basic drivers and x86 patches.

- Make sure that the md5 checksum of your iATKOS iso image matches the one in md5.rtf file. Do this MD5 check just before mounting or doing anything with the iso image! Otherwise you may have a faulty DVD image. Use quality media/burner and burn slowly.

- The oscar goes to Apple and OSX86 community..


Information:

- This OSX86 installation DVD release supports both GPT and MBR partitioned harddrives.

- Full retail main system like boot132 installation.

- You can make Clean, Upgrade (from previous versions of OS X on Intel/AMD), Refresh (renew your existing 10.5.7 installation) and driver-only installs using iATKOS v7 DVD. Upgrade/Refresh is highly successful on previous iATKOS installs and will mostly work for other installations too, read the readme for the process.

- You can update your running system using software updater just like real Macs on most PC hardware(Intel/AMD).

- Easy installation on RAID targets with manual bootloader installers and packages.

- Enhanced hardware compatibility: various systems including ATI, SiS, VIA chipset motherboards, enhanced nVidia VGA support with universal efi string and modified enablers.


Minimum hardware requirements: x86 SSE2 CPU, 512MB RAM, 10GB free space on target partition, OpenGL VGA card.

Recommended hardware requirements: Intel Core or AMD x2 CPU, 1GB RAM, 15GB free space on target partition, nVidia GeForce 6600 or better - ATI X1300 or better - Intel GMA 950 or X3100 VGA card.

Motherboard (the most important part) should be compatible for you to boot iATKOS v7 DVD and install natively.


Please read the readme carefully before anything.


web: http://www.uphuck.com
http://www.osx86.es

IRC: irc.atlantis-irc.net #uphuck.DVD
fusion.osx86.hu #iATKOS


in association with OSX86.Türk and OSX86.ES teams

uphuck

cheers..

Downloaded it =)

Now I'm waiting to receive my new hard drive to test it out soon, I can't do it on my current one... since its working at 100% on 10.5.5 by iAtkos 5i

So yeah, till the new HD arrives... its going to be a separate install :P

Anyways I did manage to boot the DVD it runs perfectly fine.. I can't wait to test an installation

using this now, and installed perfectly :)
great work and big thanks to uphuck and his team :)

Best distro running smoothly


Iatkos V7
AMD X2 3800
X1650 pro PCI everything supported
ALC880 audio
Realtek rtl8139

please help
 

i have a p4 with 1gig of ram and 32 mb ati radeon vesa graphics i installed iatkos v7 successfully but i got stuck at the boot menu it restarts automatically tell me what to do

i get this messsage when i boot into osx
 

it just says this

i will upload pictures
i cant be assed to type it out :P

I cant even burn the cd, not with Ashampoo, not with nero, variable burn speeds... whats wrong?

Hey
 

I got this very same thing from a ipc 10.5.6 ppf6 install, in my case it was a bad install cause of a bad disk image

i dont know if that would be your case dude

Hmmm
 

Have You tried MagicISO or PowerISO? That Might do the trick Man:cool:

Are You using a SATA ported DVD/RW-R?

If so use Your IDE Ported Burner instead Bro

I will try to dual boot it with my Windows 7.

What is the problem??
 

Hey guys,
I used kalyway and iatkos v7 both but i still get the same problem. The installation was completed just fine. the computer reboots and when it gets to the grey screen with an apple logo on it it just stray there..foreverrrrrrrrr....i tried going in to single user mode.. didnt work...here's what it says:
http://www.flickr.com/photos/42098931@N02/3881270107/
http://www.flickr.com/photos/42098931@N02/3881270107/

@WAQASJEHANXEB
Please post some Hardware Info. Specially Mainboard and Chipset are important to give a statement on how to solve this.

Okay! Thanks a lot for the response!

Dell XPS M1530
Processor: Intel Core 2 Duo 2Ghz
Chipset: Intel Mobile Chipset for Dell XPS
Audio: Sigmatel STAC 92XX C-Major HD Audio
Network: Dell Wireless 1505 Draft WLan Mini-card
Video: NVidia Geforce 8600M

If you need anything else , let me know :) Thanks

Hey..
tried using it... installed fine (excepet that in verbose mode i got SAM MULTIMEDIA READ WRITE ERROR... but the installation moved past it)
but on booting back it gives the infamous STILL WAITING FOR ROOT DEVICE
1. tried everything with jumpers and cables
2. used a LOT of flags in every combination -v -f -x -s platform=x86PC platform=ACPI rd=diskXsY (with all values of X & Y) rd=diskX idehalt=0


don't know how to fix it.. PLEASEEEEE HELP

Not working yet
 

Currently iATKOS v7 isn't working on my pc yet
working out how to make to work on my pc
need help plz

My spec:
AMD Athlon(tm) 64 X2 3600+
ATI SB600 Chipest
3 GB RAM
40 GB IDE [windows xp]
500 GB SATA
-210 GB [MAC]
-110 GB [Vista]
-80 GB [Shared]
Geforce 8400 SE 512MB
Realtek HD Audio
Realtek RTL8101E Lan

FiNALLLLLy
I got past the ERROR....:D

as you Said... I played with the IDE/SATA drivers in the iATKos v7 customization & Selected INTEL SATA/IDE driver....;)

And lo! it went past the "still waiting for Root device"



But then the boot stopped at a blank BLACK SCREEN... GoDDD Damn....

I booted with -V flag... also tried -x (safe mode) but it never reaches anywhere. Any ideas. please...



P.S.: I tried to delete NVIDIA drivers but I cannot even reach the -s mode. Black screen Everywhere.

iATKOS v7
 

Hello all,

Here is what I have done so far...

burned the image using magic iso success first time.. I was surprised.
tried installing on an 80g sata drive which has been formatted and ergo is empty

ASUS M2A-VM mobo
AMD Athlon(tm) 64 X2 Dual Core Processor 4600+
Cpu Socket Socket AM2 (940)
4gb - 2x2gb ddr2 ram 667mhz
80gb sata for the installation

I recently bought the 4gb kit to make sure that the system could handle it, and i have posted my system on other forums to get advice no luck so far, but it seems that my system is running a little slower and now wacky than b4. I also think that the mobo is not capable.

Any how i tried installing it and all i got was the apple logo screen with a continuous timer and a no entry sign. I tried something else, don't really know what I did but it got to the point of being stuck on finding a root system device. Anyhelp will be great, as I am sick of windows and microsoft and I am a poor student who is saving up for a mac!
Until that happens I wanna try this.

Waiting for root device
 

Can please somebody recommend me exactly what to select in the Iaktos V7 CUSTOMIZE?
I can't figure it out, tryined so many things and goggled in vain.

I tryied iDeneb and Iaktos v7.
I get the same thing (waiting for root device):
http://farm3.static.flickr.com/2432/...2b34de1b25.jpg

My specs:
CPU : AMD Athlon™ 64 3200+ Processor (512KB L2 cache, 2.2GHz, 1600MHz FSB)
Chipset : ATI RS480 Memory : 1GB DDR (400MHz)
Expandable to 2GB Hard Drive : 160GB Optical Drive : 16x DVD±RW multi-format double layer Media Reader : 8-in-1 digital media manager
Secure Digital™ (SD), Smart Media, Compact Flash, Micro Drive, Memory Stick®, Memory Stick PRO, Multimedia Card, USB 2.0 Video : ATI Radeon™® Xpress 200 (PCI-Express® )
128MB DDR shared video memory Sound : AC '97 audio, Dolby 5.1 (6-channel) Network : 10/100Mbps Integrated Ethernet LAN Modem : 56K ITU V.92-ready Fax/Modem Peripherals : Standard multimedia keyboard, 2-Button wheel mouse, amplified stereo speakers Ports/Other : 7 USB 2.0 (2 in front; 4 in back; 1 in Media Reader), 1 IEEE 1394 port (in back), 1 VGA external connector, 1 Parallel, 2 PS/2 (keyboard and mouse)
For VIDEO I'm using: PCIe Ati X1300 256 video card
http://farm3.static.flickr.com/2558/...bf4c146403.jpg

Other details I read from the motherboard:
Emachines T6410
RS480M
ATI XP400 SB400
MS-7145b0506017334

Thank you in advance. :)

final cut pro install failed!
 

hai..everyone.!!
iAtkos v7 10.5.7 run smoothly in may pc. but i had problem with Final cut pro. can't install. when i open install and run it. there a big noticed. Install Failed!
"The installer could not locate the data it needed to install the software. Check your install media or internet connection and try again or contact the manufacture for assistance.".
well i already check the disk and is all fine.i install in another comp.its ok.
when i boot my pc with -v there a lso can anyone help me. i'm new in mac pc. i'm googling it everywhere and can't find anything to solved my problem.
:'(:'(:'(

My problem is that after using the -v command my pc just restarts now i have read that "This probably means the kernel by the dvd as default is not combatible with your CPU, you can especify different kernels located into the dvd and try them to boot the dvd", now i dont really understand what to do?.
Thanks :).

Edit: also here are my pc specs:
Intel Core 2 Quad q8200
4GB DDR2 RAM
Intel G45 Chipset or ATI HD 4890 in pci express slot
using Everest apparently my mobo is named Dell Studio 540 the same as the pc.

Help??
 

Everytime i want to install, i've used all buttons like -v etc. My PC sais:

ERROR: FireWire unable to determine security-mode; defaulting to full-secure
Still Waiting for root device

HP Compaq SR1609
AMD Sempron 3000+
2x 80 GB HDD IDE
1GB DIMM RAM
ATI Xpress 200 on Motherboard
Realtek AC'97 Audio
Realtek RTL1839 LAN
LG DVDRAM IDE

iatkos v7
 

how to make all my driver works???all my driver not works

iatkos v7
spec:
acer aspire 4530
amd turion x2 - change to core 2 duo
nvidia 9100mg -not works
wireless atheros - not works
bluetooth-not works
wired gigabyte - not works
audio realtek - not works

its ok to me if audio and graphic works

iATKOS v7 is running smooth on my msi u100, had only to install correct gma950 drivers, the provided drivers in the dvd didnt work out of the box, but everything else is running great, only thought is about updating to 10.5.8, i know the sleep problem and sleepenabler.kext can fix it but i don't wanna mess with it, 10.5.7 is great!

NVidia 9600GT 1MB
 

I have successfully installed iATKOS v7 on a dual boot PC with a Gigabyte mobo - everything works well with the exception of the video card (Nvidia 9600GT 1MB) which limits my resolution to 1024x768x32 ... any suggestions on what is the easiest way of fixing this .. I have a monitor capable of displaying 1360x768x32 and would like to acheive this resolution.

I have modified the .plist without success.

In iAtkos V7 DVD, choose NVENABLER under VGA in customization and choose nothing else regarding your GPU. If you already tried some kexts or anything, you need to remove them or reinstall OSX.

Brilliant! Thank you very much ... it worked ... now I have a full range of resolutions available.

Your solution should be pinned for other users who have had the same problem and, judging by google queires, been messing about with sometimes less then adequate results.

Once again, thank you!

hi, Not to sure what to make of this but i installed iatkos v7 onto my Dell inspiron 6400 laptop all seems to go well until reboot when all i get is a disco track playing but no video(gui), tried various boots -v -f etc still comes back to the same thing,with no report of a failier.
I have reinstalled a few times with different customizations but no luck, i realise it may well be video driver related but to be honest im stumped,
I have managed to install IPC version but had problems with audio so thought i would try another distro,
I will keep trying different customizations but a pointer or 2 would be nice.

Cheers

Raz

I finally got iTKOS V7 to boot on my Dell XPS M170. Here are my problems.
Keyboard doesnt work. ( I plugged in a usb keyboard to finish install.)
Mouse Trackpad doesnt work. (I plugged in a usb Microsoft inteli mouse.)
No sound at all.
No network or wireless devices work.
Can anyone help me i would really appreciate it. Kind of new to this mac thingy.
Thanxs.

i downloaded iATKOS v7 via tpb the checksums are as follows

CRC32: CCC9A803
MD5: 6395BE5253F53F716ED042DB1DD599F3
SHA-1: 4712B9A9354E3591974CFD3C6A453CEC1157E5A5

is this the right values?

if so why when i burn the dvd there's only 480kbs worth of files written?

i used IMGBurn if that helps?

is there away to make a bootable flash drive using the iso?

iAtkos v7 doesn't boot
 

Thanks for the great work...

Installed iAtkos...installation was very smooth.

But after that it doesn't boot....it shows a blank screen with a binking cursor.

System Hardware is

Intel Core 2 Dou 2.2 ghz
Intel 945 gcnl motherboard.
160 gb seagate sata hard disk.

There is no graphics card...i think it will have in built in it.

iATKOS V7 works for me
 

I confirm that iAKTOS V7 works. my reg is: MSI P55-GD80 (great mobo for OC), i5 760 default 2.66GHZ (OC to 4GHZ stable) 4GB DDR3 Dual Channel 1600 MHZ (had to adjust settings in BIOS to get it run at default speed), Nvidia GTX 260, 230 SATA HD, and an LG DVD-RW SATA. in order to get iAKTOS V7 to install and work I had to use AHCI in BIOS for the drives , booted on DVD and used "cpus=1 busratio=20" installation started, partitioned HD to OSX extended journaled and erased it and mad it GUID. and customized installation, this is what I choose: iAKTOS V7, Chameleon V2, /Extra, DSDT, DSMOS, 9.7.0 kernel voodoo, APIC driver, Disabler, OHR, Remove TyMCE, AHCI, Intel SATA/IDE, Voodoo HDA, Realtek R1000, Post Install Actions. for my GTX 260 I choose Natit Enabler, and Nvidia Mac driver installer for GTX 2XX. if you have PS/2 keyboard and/or mouse choose the apple drive.
Add the cpus=1 and busratio=20 to com.boot.apple.plist to avoid typing them at every start up.
booted normal, plugged in my flash drive and USB hard drive 300GB and they are both recognized and functional. sound works, internet works, firewire detected but have no device to try it. Iphone detected but iTunes needs to be updated to 8.2 or later.

iATKOS v7 has worked well for me on an Asus P5B with Intel Core 2 Duo E6400, Asus P5B Premium (Vista Edition) with Intel Core 2 Quad Q6600, MSI K9N v3 with AMD Athlon 64 X2 4200+ and an old Dell 8400 with a Pentium 4 Prescott.

Not everything has worked out of the box, of course, but booting from a DVD, installing, booting the install and getting a basic setup has worked on all of them.

Try booting with -x first, and follow the initial setup, that worked for me, although I didn't had the Welcome-Video played :)

The only destro I could successfuly install. I have an MSI P55-GD80 socket1153,8GB 1600 MHZ, i5 750 CPU (OC to 4GHZ, and aGTX260, if anyone has a P55 motherboard you can ask and I will post a walkthrough of installation and bios changes I had to do, I assume this will work with anyP55 mobo. some things do not work thou, like MIC and 7.1 channel, time machines. I was able to update to 10.5.8 through software update, I did a complet update to everything, itunes, quicktime etc. then I used the iAKTOS v7 dvd reinstlled drivers andpatches only, and working perfect. this V7 is a well done job.

I am just trying to find out if my system is compatible before I even attempt to wipe and install V7

PC Specs
Gigabyte GA-K8N51GMF-9 Mainboard
AMD 64 X2 4400+ Processor
Razer Barracuda AC-1 Audio Card
XFX GeForce 9600 GSO Video Card - 768MB DDR2, PCI Express
4 Gigs OCZ Duel Channel PC-3200/DDR400 Ram
1 Tarabyte (4 Raid w/ Para) Velocoraptor's SATA

Anyone? Have any advice?

Hello!

It's my first post, so hello to everybody.

I have one problem which bothers me for a long time. I installed iPhone sdk with xcode included, because i'd like to write some mobile apps. The problem is, that i can't open library window in the interface builder. Reinstalling xcode or complete MacOs didn't help. On my macbook i can normally build UI, but on my hackintosh (which is my desktop computer) i can't.

The xcode from original Leopard dvd, without iphone sdk also doesn't work. I think that iAtkos v2 is the one which doesn't allow me to use xcode propperly, because if i install 10.5.2 (kalyway) it works ok, but iPhone sdk requires at least 10.5.7.

Please help me.

Thanks, bye

I have tried to create a virtual machine using iAtkos v7 with VMware but everytime I try and boot from the ISO image I get the following error

System config file '/com.apple.Boot.Slist' not found

Also in the risk of sounding stupid what is a MD5 Checksum and how do you do one ?

md5sum
 

An MD5Sum is a digital "fingerprint" that identifies a file. If you're download was no good then the hash wouldn't match. Most OS have MD5 check methods built in except windows. There is a concise walkthrough on the ubuntu.com page. Just search MD5. If you need a Windows based check, search for MD5Sum. Top result should be a link to Nullriver Software. There is a free simple checksum at that link.

Even if your check is good, you could still have a bad burn. I had this with my first install attempt and ended up being my burner. Even burning at the lowest speed resulted in errors. Assume there was something wrong with the calibration of the drive, but long story short, burn finished good, install failed, new drive, new burn, good install.

Sorry I can't help you with you're VMWare problem.

Successful installation...
 

I have a successful installation since the time of its release (iAtkos V7). This is the most stable distro I have tried. Works out of the box. You can check my sig for my rig. It's a 12" notebook, I mean the crappiest ever on China market.

It runs stable and I have updated to 10.5.8 thru Apple Software Update, it was painless. Been up and running for more than 6 months already, installed lots of apple software, and it's running quite well.

Have done my dsdt patch already so I have removed some of the unnecessary kext. Sleep works well, got QE/CI. Upgraded the RAM, replaced the intel WLan to Broadcom 4311 to be more "airport compatible"(lots of these in my place at less than 10USD each), then next would be an SSD drive and a processor upgrade. Feels like "Mac", runs like "Mac".

iAtkos V7, awesome distro for Leopard.

Thumbs up to the team who made it possible.

Smooth install once i got the correct drivers via the config. updated to 10.5.8...ty

core2duo @ 3.2
8 gigs ram
750 ESata drive
C2 - detected my raid and other partitions (win7)
video 8800gts
no sound yet.. but will figure this out soon.

Trouble Installing on AMD
 

This is my first go at a Mac so please bare with me. Wanted to see how a mac works before i decide on buying one.

Downloaded the iATKOS v7 and burnt to a DVD. Created a new virtual machine with 1 gb ram, 80 hard drive space and ran the install. after the install the screen was stuck at the gray screen with the apple.
Did a reset on the virtual machine and went to boot single user. then it got stuck at some point (screen snap attached). Following is my computer setup:

Processor: AMD Phenom II X4 955
Motherboard: Gigabyte GA-MA790FXT-UD5P
Total RAM: 4 GB
Video Card: ATI Radeon HD5750 1GB

Any advice is very much appreciated

Normal Bootup stuck point: http://img231.imageshack.us/img231/5...lbootstuck.jpg
Single User stuck point: http://img524.imageshack.us/img524/295/messagel.jpg

Easy install on Acer Extensa 4620z
 

Just a quick note to mention this, as I've found surprisingly few references to my laptop when searching around. Anyhow, installed this distro pretty much on all default settings, plus a couple of drivers. A stark contrast to the latest Hazard and CCLloyd releases which I've tried in the past few days.

So far, I have to say, iATKOS seems the most mature distro to me. I've now tried installing just about every OSx86 release on two desktops (both self-built, i7 and AMD Phenom) and I remember getting close to success only with iATKOS on those as well. This time, it was just night and day:

Created an 8Gb partition (just to try, didn't even expect it to work, will make larger in the future of course)

Picked a couple of drivers that seemed to make sense to me (Voodoo EFI graphics, PS/2 with touchpad, broadcom wifi, realtek audio) and let it rip. It was getting close to finishing when the screen went black and the machine rebooted.

Well, I thought something went wrong, so I erased the partition and tried again with all default and no drivers. Same thing happened, except this time I actually ejected the DVD and booted from my new Mac partition, and saw the welcome messages fly. Alas, since I didn't choose any drivers at install, I had no keyboard :(

Rebooted, installed JUST the drivers this time and voila - EVERYTHING seems to be running just fine, it picked up my wifi right away, sound was playing and my touchpad is recognized. I haven't tested the webcam or card reader, but I never really use them on my PC anyway, am sure something could be done about them as well if necessary.

Now, I'd really only like to know how to update it to Snow. Anybody with a quick and easy answer?

My only problem is it can't boot with my onboard Intel Graphics.
But i have an NVIDIA 7100GS. And i have to say this is the best distro ever!

booting issues
 

i have a dell xps 400

sys specs are as follows

Chipset - Intel 945P chipset

Precessor - Intel Pentium D CPU 2.80Ghz 2.79Ghz (thats what windows says it is)

this is what dells web page says (Intel® Pentium® D Processor up to 840 (3.2GHz, 2MB L2 cache, 800MHz FSB) with Dual Core Technology.

Video card is a EVGA 9800GT

RAM i have 4gs installed

Operating systems - Windows 7 utimate 64 bit ,Ubuntu 9.10 ,iATKOS v7 not bootable

now my problem is

FIRST - i installed it with win 7 and ubuntu already installed i installed iATKOS to its own partition and because of how i have everything installed i use Grub loader so i went into Ubuntu and updated the grub loader (update-grub) got the iATKOS to show up on the loader now when i select it the screen flashes and restarts the computer Ive tried reinstalling it with different custom options selected including trying a basic's only to no avail..

SECOND TRY - i pulled all my HDD and installed a fresh one for a single boot of iATKOS got it installed with no problems restarted computer got it to boot up to the screen where the lizard is on the top of the screen and you can choose what type of boot you want and i tried all of them and got as far as the Grey apple screen flashes and then it restarts so once again im stuck..

ill do my best to give you all info you need to help me..

any and all help is greatly appreciated thank you

John S.

Can someone help me with this release of iATKOS v7 ?
I downloaded it to my PC burned it to a DVD and started the install.
Everything runs fine untill the selection of the hard drive starts.

He can't find anything.
I formatted my Hard Disk to FAT32 and tried again. But still nothing !

Greetings

Chromosone

Just installed it and it works almost perfect. My only problem is that i have no sound. Tried different kexts but still no luck some of them even gives me panic errors. So hope there is one out there how can help.. Spec in Sig

Hi there, Had trouble with many distros. However this is on has gotten me the furtherest but i get stuck with this error in verbose mode:

ERROR: FireWire unable to determine security-mode; defaulting to full-secure.

Tried to leave it for a while and I get stuck as it keeps trying to open the root device or something like that.

Any ideas of what to do?
Here are my computer specs:
Motherboard: Gigabyte GA-MA770-DS3
Processor: AMD Phenom II X4 940 2.3ghz
Hard Drives: 1TB Samsung Spinpoint F1 SATA2
90GB Western Digital External
Ram: 8gb DDR2 PC2-6400 (4x2)
Graphics: NVIDIA GeForce GTX 260
OS: Windows 7 Professional 64-bit

Any help will be much appreciated

Thank you lovely people!
 

Many guys told me that this is my best shot for having Mac on PC - I've never used Mac but i developed Windows Mobile apps and now would like to do IPhone programming.

I cannot afford a Mac so want to try out hackintosh - I've bought an external harddrive of 300 GB to have Mac installed on it. Possible right? So that I effect my current PC windows xp in no way.

I have Pentinum 4 (R) ThinkCentre 8113D5U 3 GB Ram and around 500 GB HD in PC now. Will that support? is it possible to install hackintosh on this PC?

If it is possible, then anyone who've tried this in easy language how to do this? as am a programmer, web developer but I suck at installing such hardware challenging programs.

Can anyone help please?

Thanks.