InfiniteMac OSx86

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   Snow Leopard 10.6 (http://infinitemac.com/forumdisplay.php?f=87)
-   -   Patch DSDT (Intel DP35DP) Now slow & unstable startup (http://infinitemac.com/showthread.php?t=4396)

gamingfusion 10-12-2009 01:24 AM
Patch DSDT (Intel DP35DP) Now slow & unstable startup
 
Hello, i have just installed Snow Leopard, so i rebooted and it dodnt work so i i wet to the OSX86 Wiki and it says i have to do the following for my mobo.(Intel DP35DP)

Quote:
Sound: IntelHDA works with VoodooHDA patch removing AppleHDA kext from /S/L/E/ folder
LAN : Works with patched Intel82566MM kext
FireWire: Works out of box
32/64bit kernel & kexts: Works on both modes
Sleep: Not Working
Shutdown/Restart: Works with OpenHaltRestart kext
IMPORTANT: Patch DSDT.aml and repair permissions after first boot, otherwise KP
I came here because
I was wandering how you patch the DSDT.aml file.

Thanks in advance

gamingfusion 10-12-2009 04:12 AM
please help!

x986123 10-12-2009 06:36 AM
Get the DSDT Patcher

gamingfusion 10-12-2009 03:52 PM
ok i got that tool and ran it but im still getting a kernal panic.

Would i have to get the ICHFix?

thorazine74 10-12-2009 07:15 PM
Did you put the patched compiled DSDT.aml in /Extra or in the partition's root?
Also why it doesnt work? There could be many reasons why SL doesnt boot apart from missing a patched DSDT.

gamingfusion 10-13-2009 04:28 AM
well i have it in both spots kuzz i didnt know which place to put it.

and i get a Kernal Panic

gamingfusion 10-13-2009 04:52 AM
I got rid of the dsdt.aml from the root directory and rebooted.

heres it exactly what im getting for a kernal panic
Quote:
panic(CPU 0 caller 0xffffff80002cbf74): kernel trap at 0xffffff7f8077bae1, type 14=page fault, registers...

Error Code: 0x0000000000000000

Debugger called:<panic>
Backtrace(CPY 0), Frame: Return address...

Kernel Extension in Backtrace(with dependencies):
com.apple.iokit.IOATAFamily(2.5.0)@0xffffff7f80777 000 -> 0xffffff7f80785fff

BSD process name corresponding to current thread: kernel_task

Mac OS Version:
Not yet set
not sure if that will help

*note* where the "..." are those are in place of a bunch of crazy numbers i didnt think were needed *end note*

thorazine74 10-13-2009 08:39 AM
You may have found the issue described here.
Try to fix it with kext mentioned there or if you have the sec. IDE channel disabled try to re-enable it in the BIOS.

gamingfusion 10-13-2009 05:58 PM
k thanks man i will try to fix the kext tonight.

gamingfusion 10-14-2009 01:16 AM
OK that worked i got booted but then i got another kernal panic.

This time its the CPUPowerManagement.kext but i cant seem to find a downlaod for a Snow Leopard one,

Know of a download for one?

gamingfusion 10-14-2009 04:45 AM
ok i got that problem fixed it was a bad kext file again.

Now it boots fine but when you get to the GUI, I can move my mouse but i cant interact with the interface.

Im really not sure what this is.

gamingfusion 10-15-2009 10:08 PM
hello? *BUMP* :D

Soobie 10-18-2009 02:29 AM
Gaming Fusion I am on the same quest as you Installed SL yet not that stable as yet. No QE/CI have just tried the SilentNatit.kext and it pulled the graphics right then gave a KP and that was that.

Try a search for Macinized for how to patch your DSDT.

Any joy let me know.

Cheers.

thorazine74 10-18-2009 03:58 PM
Quote:
Originally Posted by gamingfusion (Post 37389)
ok i got that problem fixed it was a bad kext file again.

Now it boots fine but when you get to the GUI, I can move my mouse but i cant interact with the interface.

Im really not sure what this is.
Please post details about your graphics hardware and what method you used to get it supported.

gamingfusion 10-19-2009 08:33 PM
Unstable startup
 
I installed SnowLeopard last week and i have great problem with the startup. here are the problems i am having.

- nullCPUPowerManagement.kext not working(having to replace kext and repair permissions before almost every startup)

- Slow

- always need to use verbose

gamingfusion 10-19-2009 08:33 PM
Patch DSDT
 
I installed SnowLeopard last week and i have great problem with the startup. here are the problems i am having.

- nullCPUPowerManagement.kext not working(having to replace kext and repair permissions before almost every startup)

- Slow

- always need to use verbose

gamingfusion 10-20-2009 03:43 AM
well i found out that the reason why it didnt work.

Its because the startup is slow. after about 3 or so minutes it starts to work. but what weird is that its still loading up apps like skype or the SL install disc.

spalek83 10-24-2009 02:10 AM
1 Attachment(s)
i thought you were supposed to put dsdt.aml in /

or root in other words. is it supposed to be in /Extra ?