InfiniteMac OSx86

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   Leopard 10.5 (http://infinitemac.com/forumdisplay.php?f=85)
-   -   PPPoE and Sound do not work (http://infinitemac.com/showthread.php?t=1288)

jajunior 09-04-2008 12:41 PM
PPPoE and Sound do not work
 
CPU Type DualCore AMD Athlon 64 X2, 2200 MHz (11 x 200) 4200+
Motherboard Name Phitronics AM2NIK-M
Motherboard Chipset nVIDIA nForce 6100-4xx, AMD Hammer
Audio Adapter Realtek ALC662 @ nVIDIA MCP61 - High Definition Audio Controller
Network Adapter NVIDIA nForce Networking Controller
nVIDIA MCP61 - LAN Controller (PHY: Broadcom AC131)

All good, but PPPoE dont work. Just "connecting, connecting" and dont connect. What could be? Sound dont work, too.

Voyn1x 09-04-2008 01:25 PM
1 Attachment(s)
As you are posting in the Zephyroth forum i presume you are running Zeph's 10.5.2, I would switch to Leo4All or LawlessPPC which has much better driver support.

That said you can try the attached nvidia LAN driver, you should remove your existing forcedeth.kext beforehand to prevent conficts. If this fails try setting your ip manually instead of using DHCP. :)

jajunior 09-04-2008 01:51 PM
Sorry for miss, yes I'm using Zephyroth 10.5.2. I will try this forcedeth and post result after.

Thanks and appreciate for suggestions.

Quote:
Originally Posted by Voyn1x (Post 16107)
As you are posting in the Zephyroth forum i presume you are running Zeph's 10.5.2, I would switch to Leo4All or LawlessPPC which has much better driver support.

That said you can try the attached nvidia LAN driver, you should remove your existing forcedeth.kext beforehand to prevent conficts. If this fails try setting your ip manually instead of using DHCP. :)
Talking about LawlessPPC, have it only SSE3 processors support? My Atlhon X2 4200+ only have SSE2.

jajunior 09-05-2008 05:12 PM
PPPoE still don't working. "Can't find a PPPoE service". But when a try to connect in MacOS, I can't connect in Windows in first boot, on rebooting Windows again.

Could be anything with card or its just config?