InfiniteMac OSx86 - dell Vostro 1700 with iATKOS v7

InfiniteMac OSx86 (http://infinitemac.com/forum.php)

- 10.X (http://infinitemac.com/forumdisplay.php?f=36)

- - dell Vostro 1700 with iATKOS v7 (http://infinitemac.com/showthread.php?t=3975)

dell Vostro 1700 with iATKOS v7

hello , when i 'try to install the iatkos v7 on my dell vostro 1700 i' have this error :

http://img180.imageshack.us/img180/9...2009203.th.jpg

the hardware are :
bios: version A07
cpu :intel core 2 duo 2,40 Ghz (ID: 06FB)
ram : 3 GB 667 mhz dual channel DDR2 SDRAM
harddisk: 200 GB sata
video card: nvidia 8600M GT with 256 MB
soundcard: sigmatel 9205
modem: conexant HDA D330 MDC
wired: broadcom x440
wifi: intel

i'try to boot with the " -v acpi=off cpus=2 " but nothing change :(

Hi. When installing, what options did you choose? Rule of thumb is to choose minimum kexts. You should choose only chipset kext, keyboard and mouse control. The other kexts for audio, video, network etc can be installed later.

hi, the problem is that everything hangs on that screen, does not go well ..

he didnt instal. it said Mac OS Version: Not Set Yet. he's trying to boot the installer... i think?

Quote:

Originally Posted by xXrkidXx (Post 33971)

he didnt instal. it said Mac OS Version: Not Set Yet. he's trying to boot the installer... i think?

yes ; any ideas for solutions ?

this is the reply of the command "lspci" on a linux liveCD :

Quote:

00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600M GT (rev a1)
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
0c:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)

Try a different install cd. Give ideneb a try. Also readup and follow install tutorials on the web. That's the best advice I can give you.

hi, unfortunately I already tried both the "iDeneb" (well 2 versions), the "kailway." the only one left for me to test is the "IPC" ...

This is strange. Re-read your post. Have you tried booting the install DVD with CPUs=1?

hello, shook my mode cpus = 1 I've never tried it, because for my laptop in various forums said to do as I had tried (-v acpi = off etc.). Today I just feel a moment and I can tell if it worked

Hello, I tried to put both "-v cpus = 1" and "-v acpi = off cpus = 1" and the result you see in the picture attached to the post: (

any other idea ?