InfiniteMac OSx86

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   Snow Leopard 10.6 (http://infinitemac.com/forumdisplay.php?f=87)
-   -   Sapphire ATI HD4830 DVI+HDMI+VGA working with QE/CI on Snow Leopard!! (http://infinitemac.com/showthread.php?t=4073)

mrstimpy 09-13-2009 10:50 PM
Sapphire ATI HD4830 DVI+HDMI+VGA working with QE/CI on Snow Leopard!!
 
Folks I have indeed great news, got my Sapphire ATI HD4830 DVI+HDMI+VGA working with QE/CI on Snow Leopard!!

I am pleased to pull this off myself and to be able to share with the community that has shared with me a lot!

So this is the method:

  1. Download the package from Netkas in the following post on his site: http://netkas.org/?p=137
  2. Download the following package which is a mod from EVOEnabler.kext which I replaced some text on the plist file with some info from 64bit's Natit along with the Video ROM, which EVOEnabler brings one for HD4890. So basically I mixed 64bit's Natit with EVOEnabler and created a EVOEnabler 4830, you can download it from the following link: EVOEnabler 4830 pkg.

I hope it helps you all, thanks and props to Netkas, 64bit(on insanelymac), williamcsk(on insanelymac) and the creator of EVOEnabler.

Please report if this works with the standard version of hd4830 also.

Cheers!

jaafarrachid 11-18-2009 09:45 AM
Hi, I have Sapphire Ati radeon DVI+SVideo+DVI , I installed those packages and I can change resolution but no graphic acceleration.

Snow 10.6.2
In 10.5.8 i have fully acceleration using motmot
how can i activate the graphic acceleration
thanks

mrstimpy 11-18-2009 12:09 PM
@jaafarrachid:

If the packages are installed correctly (use kexthelper for instance) they should work properly, however this has not been tested on Snow 10.6.2 (I haven't updated yet). Perhaps you will need an updated QE_CI_Exotic_SL.pkg from Netkas as the EVOEnabler is just the injector.

Hope you can get it going.

Cheers!

qhgary 06-03-2010 07:36 AM
Hi mrstimpy,

I also have ATI HD4830 (DVI+HDMI+VGA) but haven't made it work properly so far.
The link of the package@Netkas mentioned in your post doesn't work any more. Could you send me([email protected]) yours if you still keep it.



Quote:
Originally Posted by mrstimpy (Post 34760)
Folks I have indeed great news, got my Sapphire ATI HD4830 DVI+HDMI+VGA working with QE/CI on Snow Leopard!!

I am pleased to pull this off myself and to be able to share with the community that has shared with me a lot!

So this is the method:

  1. Download the package from Netkas in the following post on his site: http://netkas.org/?p=137
  2. Download the following package which is a mod from EVOEnabler.kext which I replaced some text on the plist file with some info from 64bit's Natit along with the Video ROM, which EVOEnabler brings one for HD4890. So basically I mixed 64bit's Natit with EVOEnabler and created a EVOEnabler 4830, you can download it from the following link: EVOEnabler 4830 pkg.
I hope it helps you all, thanks and props to Netkas, 64bit(on insanelymac), williamcsk(on insanelymac) and the creator of EVOEnabler.

Please report if this works with the standard version of hd4830 also.

Cheers!

happylife 07-12-2010 08:38 PM
is it working with vga port ? i get a "mode not supported" msg from monitor.

gamr 08-01-2010 09:10 PM
Could You Re-Upload
 
Hey!

This is exactly what I'm looking for! I Have a Sapphire ATI HD4830 aswell. Could you please re-upload the files so I could download them, or send me a pm and I could give you my email address to send them to.

Thanks!

-Bob

abhishekjain.ims 10-05-2010 08:00 AM
Sapphire Radeon HD 5670
 
Hi can u provide me the package for Sapphire Radeon HD 5670 to work on Snow Leopard....