InfiniteMac OSx86 - SATA PCI Card

InfiniteMac OSx86 (http://infinitemac.com/forum.php)

- 10.X (http://infinitemac.com/forumdisplay.php?f=36)

- - SATA PCI Card (http://infinitemac.com/showthread.php?t=4145)

pαuℓzurrr.

09-19-2009 09:23 PM

SATA PCI Card

I'm thinking to get a SATA PCI card for my pc, so i can use it to connect my dvd drive to get burning working.
Does anyone knows a good/cheap card?
I've be looking at the VIA6214 but i'm not sure if it's supported...
Any help would be highly appreciated :)

thorazine74

09-20-2009 07:15 AM

Make sure the chipset supports AHCI or you'll be struggling with driver support, Jmicron based cards may have better compatibility.

pαuℓzurrr.

09-20-2009 10:18 AM

Thanks for the reply :)
Would you recommend any JMicron chipset?
I believe the JMB363 is supported and has AHCI too.
Still searching on google :)

Edit: JMB363 is PCIe only, and since i only have 1 PCIe which is used by my 8600GT... I need a PCI card.
Edit2: Just ordered a PCI controller with VIA6214 chipset, will update if it works or not...

pαuℓzurrr.

10-06-2009 06:14 PM

Just got the PCI Controller.
I get this information from lspci,

Code:

01:09.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62)

01:09.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62)

01:09.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 65)

01:09.3 RAID bus controller [0104]: VIA Technologies, Inc. VT6421 IDE RAID Controller [1106:3249] (rev 50)

It has 4 USB ports, a IDE port, eSATA and a SATA port.
However it doesnt find the SATA port, not sure about the IDE & eSATA
I tried to edit the AppleVIAATA kext. it does find it on boot but it doesnt work in osx itself...
Anyone know what to do?
Thanks!

thorazine74

10-07-2009 08:28 AM

Sorry but I'm afraid that is a very bad choice: here it says nothing about the card supporting AHCI (apart from being SATA1 only but that should not be really important being a PCI device) so you'll be having to use AppleVIAATA with it. But the interface on the card seems to be working as "RAID bus controller [0104]" and I think AppleVIAATA only supports pure IDE interfaces so unless the card has a BIOS and you can change its working mode (or find some other kext for it) I'm afraid the card wont work with OS X.

pαuℓzurrr.

10-07-2009 05:58 PM

Thanks for the reply :)
It wasnt that expensive (15 euros) so it doesn't really matter. I do have some USB ports more now and a xbox 360 working sata card in windows ;)

cipz	10-28-2009 07:56 AM

hi..

i'm using SYBA sa3114-4i
dunt know if you can find the product info on syba website,, no longer being there anymore
maybe you can google it

it has 4 internal port,, using sil3114 chipset
i upgraded with latest ide bios
detects fine during boot on my motherboard
use appleviaata to get it working in leopard
but it only detects 2 port only (port 1 & port2)

use it for my 2 sata dvd rom drives with good burning performance
hope this can help