iPC installation problems with hp nc6120
 

Hello everybody,
i'm trying to install MacOS 10.5 to my old HP Compaq nc6120 laptop, just to try the "mac system", but i am a complete noob at this so i dont understand most of the things you talk about here.
I'm following this installation guide and everything worked (slowly though) until the point quite at the end where the machine restarts and i should press a random key at the Darwin Bootloader and then type -v -f to go to verbose mode and load the kexts. My laptop hangs at a point where is says in yellow letters "Failed to load extension com.apple.driver.AppleACPIPCI.", followed by the seemingly infamous "Stillwaiting for root device."
Have I missed something?? Please help me!
Thanks in advance and a happy new year!

We need to know the Southbridge used in your Laptop. Best way to find out would be if you could boot some Linux Live CD like Knoppix Ubuntu - most of them would be OK - and post the output you'll get when you enter "lspci -nn" on the Terminal...

I have the very same laptop. Here is what I get when I run that command.

00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3)
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [8086:266d] (rev 03)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03)
02:04.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05)
02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus Controller [104c:8031]
02:06.1 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus Controller [104c:8031]
02:06.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE 1394 Host Controller [104c:8032]
02:06.3 Mass storage controller [0180]: Texas Instruments PCIxx21 Integrated FlashMedia Controller [104c:8033]
02:06.4 SD Host controller [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller [104c:8034]
02:06.5 Communication controller [0780]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Smart Card Controller [104c:8035]
02:0e.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5705M_2 Gigabit Ethernet [14e4:165e] (rev 03)

Well if that one's HW inforamtion fits, you would seem to be missing a Chipset-driver for Intel (ICHx fixed AppleIntelPIIXATA.kext) - it should be avaible on iPC customization. :)