iAtkos v7 Boot Problem
 

Hello all,

I Have installed iAtkos v7 on my "HP TX2000"
and i installed it many times to got it almost works

now i successfully installed it
and when i boot to MAC OS X
i hear Sounds of Intro and the talking person that's help me read Descriptions of the text on screen
but i still see Apple Logo Hanging with loading icon or i see Black Screen.
and i have tried to install drivers like nVidia inj + nVidia Mobile inj
but it got some errors at boot and don't load sound nor images

I think i'm near to make Mac OS X Working on my Laptop Soon
Help Me Plz

Thanks in advanced

Well try to boot in the safemode using -x bootflag. If that works, I would try to follow the instructions posted here.

i have tried this and not working :(
i have downloaded now Leo4all V2
and finally it's installed but no sounds and no network :(

Can u Help Me Please ?

If you would provide some more info about your hardware, we can see what's possible.
Get the file I attached, install it open Terminal, enter "sudo lspci -nn" & post it's output. :)

Hey Thank You Bro for helping
i have inserted iAtkos v7 DVD and installed Chameloen 2 for loader and Voodoo Audio driver and Wired nForce and Wirless Bradcom and installed and i have made -f flag for bot to refresh kexts.
and Result :-
Sound Still not working
Wirless still not working and not availbale in options
Wired Ethernet: it was waiting IP Address, so i entered it manually and it said to Connected, i tried to open safari but say in stauts bar that : "connecting to xxxxxx server" for each site i type. ( i think still not working.

I have downloaded this program and i will try it now,
thanks in advanced bro

This is the Output which u asked :-
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f0] (rev a2)
00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2)
00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
00:02.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fc] (rev a1)
00:03.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fd] (rev a1)
00:05.0 VGA compatible controller [0300]: nVidia Corporation C51 [Geforce 6150 Go] [10de:0244] (rev a2)
00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2)
00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a3)
00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a3)
00:0a.3 Co-processor [0b40]: nVidia Corporation MCP51 PMU [10de:0271] (rev a3)
00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a3)
00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a3)
00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev f1)
00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev f1)
00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2)
00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2)
00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269] (rev a3)
03:00.0 Network controller [0280]: Broadcom Corporation BCM4310 USB Controller [14e4:4315] (rev 01)

Installing all this stuff from a prepatched distro doesn't make it easier to solve problems - usually it even creates more of them, so if iAtkos v7 installer works in your case, I would first of all do an as clean as possible install with just a minium of those fixes.
For example: Main System, Chameleon v2, /Extra, DSDT, Voodoo Kernel of your choice, dsmos, Disabler, OHR, nForce Chipset driver & Post-Install Actions - nothing else. (Maybe PS2 driver?)

Once done go ahead and try to get your hardware working - in this case you know the changes done to the OS, and you are able to undo them if it doesn't work as expected. ;)

Some hints:
Wifi - You can try this script it will add more device IDs to the Broadcom Wireless driver. :)
Wired - This Kernel Extension should work for you.
Sound - From what I found on Ubuntu Forums your device is using an ALC861-VD Codec - Maybe this will help you.

Good Luck. :cool:

i will try these things now
but i think i removed network kexts by wrong
i will install them again from iAtkos v7

please i want to know
if i can update Leo4All v2 to iAtkos v7 with the same kexts that's allready installed now ?

Hey please for audio driver
i can't download from RapidShare
can u help me to download it from anywhere else plz bro :( ?

and i have tried bradcom script and not working .....
i open AirPort Utility from Utilities Applications and when scan it scan but can't find any Wifi
i will try the Lan Driver Now

Thanks for support dude

Good News
I Have Installed "iAtkos v7" as clean install near to what u told me before but with some addition things
and it installed successfully, and it worked normaly but with very very bad Vga Driver :D (if i scrolling any things it got crazy). so it's need to be Good
and Sound Not Working and don't know how !

but Wirless worked Good and Ethernet it says pluged in but didn't try for it :) (Wirless Working)
and now i'm updating system with software update program.

Thanks For your help bro
and i hope that i make every things work good