InfiniteMac OSx86 - Patching Apps to work in Hazard Snow Leopard

InfiniteMac OSx86 (http://infinitemac.com/forum.php)

- 10.X (http://infinitemac.com/forumdisplay.php?f=36)

- - Patching Apps to work in Hazard Snow Leopard (http://infinitemac.com/showthread.php?t=5595)

Patching Apps to work in Hazard Snow Leopard

Wondering what your recommendations would be to patch Apps to work in Snow Leopard, I've seen a listing of Marvins and AMD Patch Utility, but they look like they were released for just Leopard?

I can run basic functions in Snow Leopard on my rig, but not iTunes, Firefox, OsX86Tools or Kexthelper.

Any thoughts?

Thanks

It looks as though you have to do this from single user mode prior to boot. The problem here though is I am not totally sure how to do this. There is a guide on here somewhere on using Marvins but it speaks of a patch directory of which I cant find in the marvins app.

As you know though I am in exactly the same situation as you and although I am in SL I can basically only use the browser at the moment so need to patch my patchables.

Good Luck!

Actually have Hazard running now, but yea I can't get itunes to run or kexthelper, its really strange..

I can't get the AMD software patch utility to run either

I have to say a big part of my frustration of this whole thing is the lack of help I get from others on this forum, luckily Bunglehaze and I have tried to help one another, however I have only had one other member answer my post, pretty frustrating when no one even responds. I would be perfectly happy with a response saying, "look here stupid!"

I've been really patient, worked my way through this by my own trial an error, but I can't for the life of me figure out this issue with itunes and such.

I have downloaded the AMD Software patch but it throws the same error as iTunes. Can someone please direct me to the solution on how to correct this, apparently there is away using Single User mode, or terminal?

Thank you

I would help you if I knew, but I have no idea about that or amd.... I know how you feel though. don't give up you'll eventually get it

Thanks SportsGuy for responding to me, I agree I'll eventually get it, like I did all the other steps however after finding success of the install it would just be nice to have it done and over with and I know there are people on here that know how I can fix it :)

I know I need to patch cpuid's, but Marvins nor Zeophyroths patchers will run... I'm running on the legacy kernel which I an guessing doesn't have on the fly patching is there a kernel for AMDs that does right now in Snow Leopard?

Come on.. some one? I have to say when i first found this site I was willing to donate to keep it running, however I'm not seeing a whole lot of help going on...

I'm usually a patient person... but this is just ridiculous... :(

You posted your initial query yesterday at 5:49 PM (US Eastern time), then started griping about the lack of responses at 8:55 PM the same day, just three hours and six minutes later. The fact is that this is not a tech support line; it's a Web forum for individuals, many of whom have better things to do than to check it on an hourly basis, so it's quite common for a post to go without a reply for hours or even days. Your level of patience must be on the same order of magnitude.

I don't have a complete answer to your question; however, I do know this:

There were third-party kernels for the 10.5.x version of OS X that did on-the-fly patching of binaries for CPU compatibility, so that you could run unpatched binaries on AMD CPUs. To the best of my knowledge, though, there's no such kernel for OS X 10.6.x. Many programs will run fine without patching, but some will need to be patched.
You can boot without patching, and even run many programs, so you shouldn't need to boot another system just to run the patching utility.
AFAIK, CPU patching is not dependent on the OS version. The patching is done to change binary code in the programs themselves for compatibility with the CPU you're using. The OS version just doesn't enter into the equation, at least assuming the binary is compatible with both OS versions. (Some older programs are known not to run with newer OS X versions, and vice-versa.)
IIRC, Hazard ships with a patching utility. It worked for me. Please be more precise in your problem report -- what do you mean when you say "I can't get the AMD software patch utility to run"? Does an error message pop up when you try to run it? If so, what does it say? Does the program start to run and then crash? Does nothing happen when you double-click it? What happens when you try to run it from a Terminal program by typing its name?

srs5694,

My frustration has come from weeks of not getting any response to other questions, it finally came to a head with this issue. I'm not trying to offend anyone, it would just be nice to be responded too, I know I am not the only one feeling the same way.

I appreciate you responding to me.

Here is a screen shot of what is happening with iTunes, Firefox, as well as Marvin's AMD Patch Utility etc..

http://www.infinitemac.com/picture.p...&pictureid=106

This is the report:

Code:

Process:         iTunes [491]

Path:            /Applications/iTunes.app/Contents/MacOS/iTunes

Identifier:      com.apple.iTunes

Version:         ??? (???)

Build Info:      iTunes-9031501~5

Code Type:       X86 (Native)

Parent Process:  launchd [72]



Date/Time:       2010-02-23 15:47:30.230 +0000

OS Version:      Mac OS X 10.6.2 (10C540)

Report Version:  6



Interval Since Last Report:          15233 sec

Crashes Since Last Report:           1875

Per-App Crashes Since Last Report:   13

Anonymous UUID:                      70BD7819-E90F-47F8-9355-0E94E1177A1D



Exception Type:  EXC_BAD_INSTRUCTION (SIGILL)

Exception Codes: 0x0000000000000001, 0x0000000000000000

Crashed Thread:  0



Thread 0 Crashed:

0   dyld                                  0x8fe2b7af _sysenter_trap + 3

1   dyld                                  0x8fe2d5da mach_init + 47

2   dyld                                  0x8fe01766 dyldbootstrap::start(macho_header const*, int, char const**, long) + 448

3   dyld                                  0x8fe01057 _dyld_start + 39



Thread 0 crashed with X86 Thread State (32-bit):

  eax: 0xffffffe4  ebx: 0x8fe2d49c  ecx: 0xbffffb0c  edx: 0x8fe2dce2

  edi: 0x00000000  esi: 0x00000000  ebp: 0xbffffb58  esp: 0xbffffb0c

   ss: 0x0000001f  efl: 0x00010282  eip: 0x8fe2b7af   cs: 0x00000017

   ds: 0x0000001f   es: 0x0000001f   fs: 0x00000000   gs: 0x00000000

  cr2: 0x8fe2b7ac



Binary Images:

0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <211AF0DD-42D9-79C8-BB6A-1F4BEEF4B4AB> /usr/lib/dyld



Model: MacPro3,1, BootROM MP31.006C.B05, 4 processors, 2.6 GHz, 8 GB, SMC 1.30f3

Graphics: GeForce 9500 GT, GeForce 9500 GT, PCIe, 1024 MB

Memory Module: global_name

AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x1000), Atheros 9280: 2.1.8.10

Network Service: AirPort, AirPort, en0

Serial ATA Device: ST3400620NS, 372.61 GB

Serial ATA Device: hp        DDVDW TS-H653R

USB Device: Mass Storage Device, 0x058f  (Alcor Micro, Corp.), 0x6362, 0x52500000

USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc517, 0x12300000

I have not been able to locate the patching utility in my install of Hazard, which came off the Client Server ISO, could you tell me where you found it.

Thank you!