|
Leopard on zv5000
Having some issues loading Leopard on my Pavilion ZV5000. Has anyone had any success in loading Leopard on this lappy? And of course I will do my research as expected. ;)
|
Yes, I did it with the Brazil Mac DVD patched with the TOH Sleep kernel.
But I would suggest a more modern method now, Like iAtkos, or Empire EFI ect. It will only load with a USB DVD drive, then you select USB floppy as boot device, internal DVD-ROM wont boot the DVD. 00010 |
Thanks for the response, but it did boot to the DVD, but when I try to load the drive with the options I think will work with this machine it crashes half way through the installation and reboots. Not sure if it is the kernel or the fact it has the nforce chip set?
Here are the specs: Manufacturer: Hewlett Packard Product MPN MPN 559158 Key Features Processor Mobile Pentium 4-M 2.4 GHz Installed Memory 500 MB (DDR SDRAM) Hard Drive 50 GB IDE, 4200 RPM Display 15 in. XGA TFT LCD Motherboard Bus Speed 533 MHz Storage Controller Type IDE CD / DVD Type DVD-ROM Optical Drive Read Speed 8x (DVD) Display Tech XGA TFT LCD Screen Size 15 in. Display Max. Resolution 1024 x 768 Video Graphic Processor ATI Mobility RADEON 9000 IGP Expandability 1 x Type I/II PC Card Slot, Docking Station/Port Replicator Expansion Ports 3 x USB 2.0, 1 x IEEE 1394a (FireWire), VGA out, Parallel Port, RJ-11 (modem), RJ-45 (NIC), S-Video out Input Method Keyboard • Touchpad Networking Networking Type Integrated Network Card Data Link Protocol Ethernet • Fast Ethernet Modem Analog Modulation Protocol ITU V.90 • ITU V.92 If anyone knows any known issues with this particular machine running Leopard please let me know. Thanks :) |
Oh by the way I am using the same flavor of Leo 10.5.5 as the one I used on my desktop machine, iATKOS v5i. By all rights this version should work flawlessly, but yet it still does not want to load, just reboots half way through the loading process. Could it be that I am choosing the wrong options in customize?
|
Quote:
Propably directly after the grey Apple screen appears, or at a time you've already had the spinning wheel beeing displayed? What Kernel are you using - tried with selecting ToH, yet? |
It reboots just about half way through loading the OS, when it is actually loading the hard drive. I am sure it is the options I am choosing. I am not sure if the version I have has the ToH kernel or not. I do believe I will have to just keep trying different combinations until one at least loads. I can fix it from there, but I have to at least get it to boot with the correct kernel first. I am going to have to figure out how I can load the system with the command line, so I can see exactly what is going on and where the kernel panic is detected causing it to reboot.
Keep shooting me ideas guys, it helps keep me focused..lol Thanks in advance :) |
Well you could just build or download a BrazilMac DVD and delete its default kernel and replace it with the TOH kernel, that worked perfect for me.
Matter of fact this was my first OSX86 attempt... 00010 |
Okay thanks I will give that a whirl. :)
|
Well so much for that...I am on a satellite connection and the file is just too big for me to download without getting FAPed (fair access policy), so I guess I am stuck unless someone can get it for me and burn it to dvd. I am not sure if asking this is against the site policy,but if anyone can send me a copy of this version of OSX I would greatly appreciate it. I would gladly pay the postage and the cost of the media. Paying for the the software however would be unethical ;).
Thanks in advance |
Okay I finally got all of my system specs thanks to a handy program, Everest Home Edition.
HP Pavilion ZV5000 Pentium 4 3GHz Crucial 2700 DDR 1Ghz North Bridge - ATI RS300M South Bridge - ATI SB200 ATI Mobility 9000/9100 IGP (RS300M) AC97 Audio ATI SB200 Realtech RTL8139 PCI Broadcom 802.11g Wireless Adapter Now I am using iATKOS v5i distro, but I am having Kernel panics on almost every option I choose, so if there is anyone out there that is familiar with this distro and this hardware configuration I would greatly appreciate some guidance. I have already checked the Wiki site for hardware compatibility and from what I have seen this should work. Thanks in advance :) |