Kernel AMD para Mac OS X Lion 10.7.4 (Darwin 11.4.0 XNU) — Suporte a AMD FX / Bulldozer e Correção de Apps de 32 Bits

@frisco2here a new problem! The last days I modified my NVIDIA Grafik driver, I accept that an error is suffused to me. Now I receive a funny error message with start from LION 10.7.4! I investigated in the Internet and nothing found, which continues to help to repair. Perhaps does someone have an idea? 1. Problem “kernel:…

Hello , frisco2

c'est quand que tu nous met tes images sur ce site du mode 64 bit !

Sur ton site , elles sont tellement petites que l'on ne voit rien ! lol lol lol

With kernel "bronzovkAnVoodoo_0_9_26"
I'm not allowed to copy files, nor do almost anything.

Since the kernel "xnu-1699.26.8_v3_rev_b"

This does not happen, but I can not apply the patch

Shows that the path was not found .. ?!?!

Could anyone help me with this patch?

Place a step-by-step FULL detail for each patch? please:'(

@R:A:W:X86You can copy NO files?! There is the authorization bug, when having sysenter traps patched. But this only affects copying files to places where you don't have write permissions. (and annoyingly any related system operation -.-) i.e. I can copy files within ~/ without any problems. The only possible workaround atm is, to work as super…

can you explain how? :

sysenter traps to be patched in /usr/lib/dyld and /usr/lib/system/libsystem_kernel.dylib

Read all 19 pages and I've got 10.7.3 kernel working fine. When I just copy the 10.7.4 kernel and boot up the system, i lose wireless and probably some other stuff.

Can anyone give step by step instructions in how to upgrade the kernel?

I can boot into snow leopard with the lion hd and then just need next steps.

R:A:W:X86's v0.9.30 kernel + Lion 10.7.5 DP2 (11G22)

@R:A:W:X86PLEASE TEST FOR ANY PERMISSION RELATED BUGS: copying files, LoginWindow.app etc.

Testing your latest kernel (v0.9.30) with the Lion 10.7.5 DP2 (build 11G22)

Most of basic operations (copying, login, samba, etc) seem to work normally on my AMD P-II x4

No permission issue occurs during the test! (Y)

Thanks for the great job

Help R:A:W:X86
My Lion (32 bit) install almost perfect i have 1 problem:
first everything is ok but then after 15 min of using lion i cannot launch certain apps like activity monitor, preview etc. they are just bouncing on the dock, and if i close the apps i'm running and relaunch them they bounce too.
some apps working(chrome, quicktime) some apps bouncing after 15 min
i've tried every kernel same with everyone
What should i do?
( i have an amd phenom ii x4 925)

@uchihaxyzHelp R:A:W:X86 My Lion (32 bit) install almost perfect i have 1 problem: first everything is ok but then after 15 min of using lion i cannot launch certain apps like activity monitor, preview etc. they are just bouncing on the dock, and if i close the apps i'm running and relaunch them they bounce too. some apps working(chrome,…

hello ,

take the time to read the subject and you will understand.

@R:A:W:X86Have not had any time to work on this for some weeks now - job and personal stuff have priority - but here's some small update. PLEASE TEST FOR ANY PERMISSION RELATED BUGS: copying files, LoginWindow.app etc. Download: xup .in/dl,20817071/test30_kernel.zip/

hello,

Thank you for your work.

@gilstake the time to read the subject and you will understand.

i really dont know what are you referring to
i have a SL hackintosh for a year now i did a lot of research on that and i tried to install lion like 50 times till i got it right
i did block xpchelper, deleted zz folder, did some terminal things
i think i did my homework but maybe i'm missing something
i would appreciate if you explain me whats wrong

@uchihaxyzi really dont know what are you referring to i have a SL hackintosh for a year now i did a lot of research on that and i tried to install lion like 50 times till i got it right i did block xpchelper, deleted zz folder, did some terminal things i think i did my homework but maybe i'm missing something i would appreciate if you explain…

yop !

http://www.insanelymac.com/forum/index.php?showtopic=27… ↗

Little bugreport for new kernel and 10.7.4:

With Kernelflags: -v -f npci=0x2000 arch=x86_64 busratio=155 the system boots up to the point where my ntfs partitions are detected and the gui should show up. At this point nothing happens anymore. No error - nothing.

With Kernelflags: -v -f npci=0x2000 busratio=155 the system starts up fine but after 10 minutes I am unable to start some system programs.

Can´t test authentication for 64bit as I am unable to get it up

I would like to use Xcode 4 on my notebook - AMD E-450 APU with Radeon(tm) HD Graphics 1.65 GHz

First I found some tutorials how to do it but it was using VMware and for Intel processors so probably would not work..
I found this forum but it's quite complicated for me actually how to do it. Is there any link with a guide?

I have already MAC OX 10.7.3 or 10.7.4
I downloaded also kernel on site osx 86.co/f100/10-7-4-amd-kernel-t7687/ update 2012-05-31

right now I don't know what to do and how to start..
I know I have to install 32bit not 64bit as my processor will not run that.

Should I install my MAC OX from my WIN7 or I have to create bootable pendrive? What to do next and how to implement that kernel? Do I finally need a VMware?

Any help will be highly appreciate.

fx-8150, seems all main issues have gone with the latest kernel...

hey !

celeron 341 core solo 2,93 / 775 / chip i865 / ram 2x 512 ddr 333 / FX 5500 256 mo AGP 8x

kernel v5 Dimitrik .

@ R:A:W:X86

hello,

Thank you for this kernel. I continued my tests, it's a shame he is not running at 100% :'( , really well optimized, it supports the overclock without problems, with a Mugen 2 does not exceeded 45 ° C
the figures speak for themselves !

le même unlocker en x6 à 3,6 turbo désactivé .

@R:A:W:X86I am sorry for your problem, but using that boot flag or not should not be any matter. And while we're on the subject some more time: Why the ---- are there so many people who do not understand this?! The original Lion (Vanilla) Kernel is a fat binary made up of an i386 and a x86_64 part. All patched Kernel consist of the i386 part…

first i should say thank you for all your work. i have tried to install 10.7.4 in my AMD machine for more than two months. and i don't know how to compile the x86_64 source to a kernel. does your newest kernel (release in 7-18) need to be complied if i would like to run a 64-bit app. PS: i am a Chinese, my english is poor. but i hope you can understand that.

new kernel + amd_insn_patcher = all problems solved for me ^_^

Thank you R:A:W:X86 (Y)

I'm using VoodooPower, you too?
--> Here are switching stages very well, but the turbo core I do not think it works right?

--> Is there any way to switch the fancy name that appears on the processor? only to not get the same aesthetic as "unknown." it is possible to change this?

---> The kext that is with the patch, ("IOHIDFamily_nointervalcheck.kext.zip") is always necessary to use, or only in some particular case?

One issue remains... font rendering is wrong in some apps.

@R:A:W:X86Can you describe with more details, what the problem is?

this happens only to third-party apps, as i can see... all native apps look as they should.

ps not all third-party apps, opera e.g. looks good.

@ R:A:W:X86

hello,

I went further in my tests, everything works perfectly in 32 bit, I no longer applicable QuickTime bug (video capture) works as well as everything else, I installed my HD 4850 1GB (HDMI / VGA / DVI) I only have DVI, it is already well 1280x1024x32 @ 75 hz Halleluya!

I encounter the problem of the network, regardless of the network card used, can not establish the connection (dlink 528 tx / rtl 8139 on the motherboard)

With kernel Dimitrk, but it works fine with your last kernel 11.4, impossible to make them work.

@R:A:W:X86Be sure to patch dyld & libsystem_kernel.dylib only - do not touch any other files in /usr/lib with amd_insn_patcher

Thanks, i forgot to unpatch libSystem.B.dylib... now unpatched and the problem has gone.

Just to compare staff performance with the latest kernel.

Share your friends!

//Update

With a fresh 10.7.4 install and only the two dyld´s patched manually the new kernel runs quite perfect! Yesterday I tested the kernel for about 2 hours without any issues. Copying, authorization, Appstore etc. pp. works fine!

Thanks alot R:A:W:X86

@misterfrista//Update With a fresh 10.7.4 install and only the two dyld´s patched manually the new kernel runs quite perfect! Yesterday I tested the kernel for about 2 hours without any issues. Copying, authorization, Appstore etc. pp. works fine! Thanks alot R:A:W:X86

misterfrista,think that the performance of our Bulldozer's is the standard?

icloud works well?

@felipeunixthink that the performance of our Bulldozer's is the standard?

i got almost 6 in os x and same in windows 7 x64 (fx-8150)

@R:A:W:X86Again: No working 64-Bit Kernel. In OS X no 64-Bit Kernel - but SSSE3 instruction set capable CPU (Lion) - is needed for running 64-Bit applications.

i want to know how to compile the kernel(how to patch)? how to use the .diff files? thank you!

@felipeunix: I´ll test icloud when i am home

Anyone tried xcode yet?
Maybe i´ll give it a try today..

@misterfrista@felipeunix: I´ll test icloud when i am home Anyone tried xcode yet? Maybe i´ll give it a try today..

Unless anyone has PURE 64-bit running on the machine, with the FX Kernels etc. Xcode Will NOT Work.
It's Pure 64-Bit for the Core Program

Hmmm… I Found More Info On How XPCHelper Works Here:
developer.apple.com/library/mac/#documentation/MacOSX/Conceptual/OSX_Technology_Overview/SystemTechnology/SystemTechnology.html

Interesting It Tells What Is Involved in XPCHelper
and Maybe We Can Look Into it To Try and Patch Stuff?

With this latest kernel as it was for folks who do not have bulldozer?

have to apply the patch not to freeze applications on 32bit mode?

@R:A:W:X86In case you are talking about 64-Bit KERNEL: Please get correct information, before spreading your wrong assumption as a fact! support.apple.com/kb/HT4287 Not to mention, that I used to explain this, just two pages back in this thread...

WTF are you talking about? this makes no sense what-so-ever I've tried, Xcode for Lion is a 64-Bit App. and I Tried Running it through 32-bit and the Unsupported message occurs,
so idk wtf you are talking about I never mentioned a thing regarding what you posted in the link. In fact that link is irrelevant to what I was saying,
k?

I´ve tried the latest Xcode yesterday just for fun.
At least I am able to install it successfully with the latest kernel.
I´m also able to install the Commandline utils etc.
Compiling things with xcodebuild runs fine, but building the kernel is a no-go as cxxfilt gives errors with make command!

Its not important for me, just wanted to see it myself

Seems like at least the commandline utils work as I am able to compile and use Macports without any problem!

woah.

i'm not going to say too much here

but thanks to r a w and this thread, i've got lion running in VM, FINALLY running all the osx apps full throttle without crashing

i've learned a lot along the way about osx86

big kudos to r a w for this kernel and the insn patch.

i only wish it natively supported my dual 7770s

but, i can live. thanks

"@@ -292,6 +292,10 @@
panicstr = str;
paniccpu = cpu_number;
panicwait = 1;
+
+ kdb_printf("In case you read this there has been a kernel panic.\n"
+ "There is no ----ing support for running Lion on AMD.\n"
+ "You have to try fixing this yourself.\n\n");

PANIC_UNLOCK;""

Taking a look at your code, RAW, i couldn't let this piece go without any comments: you're an artist! Reading this message at my first kernel panic with your kernel made me laugh out loud even being mad about my system crashing. It was sort of relieving in the face of utter frustration. Congrats!

Seriously, one question: your kernel is i386, as you said before, since it's based on anterior patched kernels (AndyVand, Bronzovka) that are all i386. But the original vanilla kernel - correct me if i'm wrong, please, here i'm way beyond my field of knowledge - is x64_86, right?, and those i386 patched kernels are all based in this single x64_86, is that correct?

So why is not possible to build a AMD_64 kernel based on x64_86? Why the patched ones seemingly have to be 32-bit? Or did Apple release a dumbed-down kernel as open source?

Another one: is there any public knowledge base provided by AMD, where one can look for especifications of, say, Bulldozer CPUs and how low-level and higher-level programming should be projected for them?

That long set of hex numbers, are them assembly code? If yes, are they the original assembly code of vanilla (therefore, intel assembly)?

@R:A:W:X86I have no problem using the same kind of onboard device on both setups... Maybe try to delete the device from Network.prefpane then readd it? How-To patch: developer.apple.com/library/mac/#documentation/Darwin/Reference/Manpages/man1/patch.1.html How-To compile: objc.id .au/post/10101528120/compiling-the-os-x-10-7-kernel

thank you!:)

Well, Mountain Lion is here. For we AMD users, three options: change to Intel, stuck with Lion i386 64-bit suporting on FX line (or Snow Leo with full functionality for all other AMDs) or hope, crossing fingers, that someone wise enough to patch a working arch x64_86 kernel pops out of the blue.

RAW, i tried the 64-bit kernel. Instant reboot, as you told me. But, remember, i have a plain Athlon II x2. No ssse. So the question is - assuming the problem affects Bulldozers as well - why does this happen? Any clue?

@The ConnacticWell, Mountain Lion is here. For we AMD users, three options: change to Intel, stuck with Lion i386 64-bit suporting on FX line (or Snow Leo with full functionality for all other AMDs) or hope, crossing fingers, that someone wise enough to patch a working arch x64_86 kernel pops out of the blue. RAW, i tried the 64-bit kernel. Instant…

I tried the kernel on x86_64 on my amd Athlon X2 7550 and it booted to the point where launchd would start up. no further, just like booting without -legacy
it says verbosely "Kernel is LP64" meaning 64-bit i've tried all the possible boot combination but it's a no-go.
SSSE3 emulator, how can it be so hard? (theoretically speaking) because there's only 16 new instructions that SSSE3 introduced.. hmm...

But why it doesn't boot, Justin? That's the question!

Indeed, it doesn't boot even with ssse3-enabled AMD FX series, as RAW x86 said before, so it isn't just a sss3-related issue, tha could be solved with an emulator.

Now don't let me be misunderstood: the emulator is important, as it would grant a full working Lion for almost every AMD user. We're in Mountain Lion era, though; without a working patched x86_64 kernel, in addition to a sss3 emulator for non-Buldozer users, the AMD hackintoshes will slowly fall into obsolescence.

Do not think the fight is over. Mountain Lion is here!

The fight isn't over, but for the fight to be won, it's not enought for Mountain Lion to be here if it does not roar in AMD Hackintoshes, lol.

i do have ML running just looking into the programms next too xcode we need wich prob be

cxxfilt-11

dtrace-96

kext_tools-268.7

but i cant figure out wich version of bootstrap_cmds it is

maybe someone else can ? meanwhile i dl new xcode …i might get it up and running by tonite and give it a shot ..but my timeframe is limited so will se if i get it goin

@akimoai do have ML running just looking into the programms next too xcode we need wich prob be cxxfilt-11 dtrace-96 kext_tools-268.7 but i cant figure out wich version of bootstrap_cmds it is maybe someone else can ? meanwhile i dl new xcode …i might get it up and running by tonite and give it a shot ..but my timeframe is limited so will se…

is your ML run on amd or intel?

@R:A:W:X86Interesting. The patched x86_64 Kernel works on my Intel machines as well. I have some suspicions what could be the problem for the majority of us AMD users here...

What would them be?

I tried to compile the kernel to no avail...

Differences between AMD64 and EM64T
There are a small number of differences between each instruction set. Compilers generally produce binaries that target both AMD64 and EM64T, making the differences mainly of interest to compiler developers and operating system developers.

Currently
EM64T’s BSF and BSR instructions act differently when the source is 0 and the operand size is 32 bits. The processor sets the
zero flag and leaves the upper 32 bits of the destination undefined.

AMD64 supports 3DNow! instructions. This includes prefetch with the opcode 0x0F 0x0D and PREFETCHW, which are useful for hiding memory latency.

EM64T lacks the ability to save and restore a reduced (and thus faster) version of the floating-point state (involving the FXSAVE and FXRSTOR instructions).

EM64T lacks some model-specific registers that are considered architectural to AMD64. These include SYSCFG, TOP_MEM, and TOP_MEM2.

EM64T supports microcode update as in 32-bit mode, whereas AMD64 processors use a different microcode update format and control MSRs.

EM64T’s CPUID instruction is very vendor-specific, as is normal for x86-style processors.

EM64T supports the MONITOR and MWAIT instructions, used by operating systems to better deal with Hyper-threading.

AMD64 systems allow the use of the AGP aperture as an IO-MMU. Operating systems can take advantage of this to let normal PCI devices DMA to memory above 4 GiB. EM64T systems require the use of bounce buffers, which are slower.

SYSCALL and SYSRET are also only supported in IA-32e mode (not in compatibility mode) on EM64T. SYSENTER and SYSEXIT are supported in both modes.

Near branches with the 0×66 (operand size) prefix behave differently. One type of CPU clears only the top 32 bits,
while the other type clears the top 48 bits.

may smth. of this be the clue?

As for me, i expect it not to be the clue. If we have to emulate more instructions yet than ssse3, then i think AMD hackintoshing is really at the verge of obsolescence.

I compiled a 10.7.4 kernel with a mix of patches with R:A:W 's patches and the anv's legacy kernel 0.5.1 for on the fly patching, it boots up for x86_64 and i386 without instant reboot. but gives a kernel panic near where launchd would start up...
I'll upload it soon for you to test.. I doubt you'll get any further than the KP tho, interesting that I am the only one who made a kernel that didn't instantly reboot…
media fire.com/download.php?u3kbvqy9it4sjda

Great job, Justin! Cool that someone takes the torch from RAW and keeps it running for AMD machines. If a 64-bit kernel is really built, we can even make it to Mountain Lion someday!

Did you ran your kernel on a FX series CPU, or on an older series (therefore, lacking the need of ssse3 support)? Can you upload a screen of your KP, for us to help identify the causes?

@The ConnacticGreat job, Justin! Cool that someone takes the torch from RAW and keeps it running for AMD machines. If a 64-bit kernel is really built, we can even make it to Mountain Lion someday! Did you ran your kernel on a FX series CPU, or on an older series (therefore, lacking the need of ssse3 support)? Can you upload a screen of your KP, for…

Yes, I Will do that, I'm trying to compile the kernel again making some patches to see if it changed anything, but I tested it on a normal NON ssse3 amd cpu,
AMD Athlon X2 7550

the KP is NOT related to ACPI like in the previous kernels for Snow Leopard. It's to do with the patcher I think, Let me upload a screenie soon ^_^
In the meantime, Please try it yourself and let me know your results

I'll do just that, but i'm afraid i'll get similar results, since i have a similar dual core, one generation newer, an Athlon II X2 250. Two questions:

1) The KP you got was when booting arch X64_86? Or both archs?

2) Assuming it's possible to boot arch=i386, did it give you 64-bit apps support on your 32-bit non ssse3 capable system? It would be an important thing to know, because it would be a step further even without a true 64-bit kernel with 64-bit extensions (the latest RAW kernel give 64-bit support for i386 kernels, but only on ssse3 capable CPUs).

Thank you, and keep up the good work!

@The ConnacticI'll do just that, but i'm afraid i'll get similar results, since i have a similar dual core, one generation newer, an Athlon II X2 250. Two questions: 1) The KP you got was when booting arch X64_86? Or both archs? 2) Assuming it's possible to boot arch=i386, did it give you 64-bit apps support on your 32-bit non ssse3 capable system?…

Any boot flag gives that KP, it has something to do with the integration of the on the fly patcher...

good work Justin , i'd really love to test ur kernel as soon i get a new HDD keep the hard work guys

With FX and useflags: -v busratio=155 npci=0x2000 arch=x86_64 I get instant reboot!

@justinster123I compiled a 10.7.4 kernel with a mix of patches with R:A:W 's patches and the anv's legacy kernel 0.5.1 for on the fly patching, it boots up for x86_64 and i386 without instant reboot. but gives a kernel panic near where launchd would start up... I'll upload it soon for you to test.. I doubt you'll get any further than the KP tho,…

Hi justinster123,

here my test with LION 10.7.4
with the following boot flag:

usekernelcache=no cpus=6 maxmem=4096 -v, f

and with

-legacy usekernelcache=no -force64 arch=x86_64 busratio=17 cpus=6 maxmem=4096 –v -f

and with

-legacy usekernelcache=no -force64 arch=i386 busratio=17 cpus=6 maxmem=4096 -v - f

I get every time a KP, see picture

pictures:
send space.com/file/4n3025
send space.com/file/dr5g00
send space.com/file/3e05iw
send space.com/file/3nyi0n

@frisco2here my test with LION 10.7.4 with the following boot flag: usekernelcache=no cpus=6 maxmem=4096 -v, f and with -legacy usekernelcache=no -force64 arch=x86_64 busratio=17 cpus=6 maxmem=4096 –v -f and with -legacy usekernelcache=no -force64 arch=i386 busratio=17 cpus=6 maxmem=4096 -v - f I get every time a KP, see picture pictures:…

hello frisco2,

résulat same as you, I give up for now, I ordered a small FX 6100 to 119 € with 15 € for reimbursement by AMD.

The x4 960 t , I'll put it back in its box and put it on my mantle for memories of good times !

@frisco2here my test with LION 10.7.4 with the following boot flag: usekernelcache=no cpus=6 maxmem=4096 -v, f and with -legacy usekernelcache=no -force64 arch=x86_64 busratio=17 cpus=6 maxmem=4096 –v -f and with -legacy usekernelcache=no -force64 arch=i386 busratio=17 cpus=6 maxmem=4096 -v - f I get every time a KP, see picture pictures:…

Some informations to your kernelflags:
1. Don´t use arch=x86_64 and -legacy togehter, cause you can use 32 bit or 64 bit kernelmode and not both at same time.

2. arch=i386 and -legacy is the same but i think only -legacy is implemented in this kernel.

3. -force64 is not implemented in this kernel so it´s absolutly useless.
(On SnowLeopard it was used to enable 64 bit userland while running 32 bit kernelmode)

Thanks for the quick answers, but it does not matter what I enter as a boot flag, it is always the same error message

I compiled another kernel without the opcode patcher that boots to the point where launchd would boot up and no further on x86_64 ... Those of you with fx and test it out but @R:A:W does your kernel work in 64 bit kernel space on your amd?

@R:A:W:X86No. But the x86_64 Kernel I compiled from my collection of patches, has been booting on yours as well - hasn't it. I have started some testing on this, but it's yet another needle in a haystack... A little of topic: Has someone yet managed to compile the ML Kernel in Lion?

lmao do you want me to upload it anyways for you to try? .__.
I really need to see if it will boot for you in 64-bit kernel space

@R:A:W:X86Of course, you are welcome to upload it. I am not very busy atm, so I could try it if you want me to.

Here You Go! Test Away!
media fire.com/download.php?osaa3sf2239nsvh

@R:A:W:X86The x86_64 Kernel is still instant reboot. The i386 Kernel is booting this time, but your build is missing one of those fixes, bronzovka has made, so it freezes after hard disk initialisation... I haven't furher checked that Kernel yet - is it made through the building scripts by AnV?

hmm… which fix? that may be very well why it doesn't boot.. that's odd, it has to be the chameleon version I'm on 2.1 1856
try that
Chameleon 2.1 rev 1856 Fix, iCloud and Facetime. (doesn't fix them but oh well)

hmmm no, I haven't made it through the building scripts why?
cctools fails to patch when I tried.

@R:A:W:X86some reimplementation from snow leopard xnu, something when the kernel deals with kext properties. when not having these added, to some i386 kernel i made during my testing, it hasn't continued booting after hard diks initialisation - just like your build does. don't remember exactly - few months ago now, when i put these things…

This is my chameleon boot.plist file

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Boot Graphics</key>
	<string>Yes</string>
	<key>EthernetBuiltIn</key>
	<string>Yes</string>
	<key>Kernel</key>
	<string>mach_kernel</string>
	<key>Kernel Flags</key>
	<string>PCIRootUID=1 npci=0x3000</string>
	<key>Legacy Logo</key>
	<string>Yes</string>
	<key>Quiet Boot</key>
	<string>No</string>
	<key>SMBIOS</key>
	<string>/Extra/smbios.plist</string>
	<key>Timeout</key>
	<string>5</string>
	<key>npci</key>
	<string>0x2000</string>
	<key>UseKernelCache</key>
	<string>No</string>
</dict>
</plist>

@justinster123Here You Go! Test Away! media fire.com/download.php?osaa3sf2239nsvh

Hi Justinster123

best thanks for the last adjustment of the kernel

Now the system hangs at USBF: 6719 AppleUSBOHCI … .

without this message >>> still waiting for root device
my BIOS settings are unchanged and are also set correctly
what should I do?

@frisco2best thanks for the last adjustment of the kernel Now the system hangs at USBF: 6719 AppleUSBOHCI … . without this message >>> still waiting for root device my BIOS settings are unchanged and are also set correctly what should I do?

OHCI means usb 1.1, try deactivating USB Legacy Support in BIOS setup.
I will test this kernel soon, now I have to do a lot of calculus, derivatives and integrals :-|

@davisin666OHCI means usb 1.1, try deactivating USB Legacy Support in BIOS setup. I will test this kernel soon, now I have to do a lot of calculus, derivatives and integrals :-|

Damnnnnn lmaoooo I'm still in Pre-Cal. Physics AP tho starting in september University level physics for grade 12 >_<

@frisco2best thanks for the last adjustment of the kernel Now the system hangs at USBF: 6719 AppleUSBOHCI … . without this message >>> still waiting for root device my BIOS settings are unchanged and are also set correctly what should I do?

I must've overlooked something i'll post the diff later for R:A:W to take a lookat but I can't work on it further for a while, i'm super busy atm

@davisin666OHCI means usb 1.1, try deactivating USB Legacy Support in BIOS setup. I will test this kernel soon, now I have to do a lot of calculus, derivatives and integrals :-|

I test the customized kernel with 10.7.4 on an external USB HDD

thanks for the answer, I'll try it and give a message

my usb keyboard works no more.
with the PS2 Keyboard hangs at USBF: 6719 AppleUSBOHCI… without this message >>> still waiting for root device

@R:A:W:X86Absolutely not the same. arch= gives advice to Chameleon wether the i386 or x86_64 should be loaded, while -legacy disables the use of EM64T in case the i386 Kernel is loaded. (so to say the opposite / disbaler of -force64 mode, which is now loaded by default on all CPU like when you are using the Vanilla Kernel.)

Thanks for the information, it´s good to know.

Thought it was implemented instead of arch=i386.

@frisco2my usb keyboard works no more. with the PS2 Keyboard hangs at USBF: 6719 AppleUSBOHCI… without this message >>> still waiting for root device

I had the same problem on my system.
Using a other kernel fixed it on my computer.

@wastezI had the same problem on my system. Using a other kernel fixed it on my computer.

Which kernel should I use for lion 10.7.4?

just a offtopic question for all the Bulldozer Lion guys what was your audio solution ( VodooHDA,DSDT, AppleHDA ?) just curious

@akimoajust a offtopic question for all the Bulldozer Lion guys what was your audio solution ( VodooHDA,DSDT, AppleHDA ?) just curious

voodooHD works with my system

mon rapport .

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Kernel</key>
	<string>mach_kernel</string>
        <key>PCIRootUID</key>
        <string>1</string>
	<key>Kernel Flags</key>
	<string></string>
	<key>Boot Graphics</key>
	<string>Yes</string>
        <key>Quiet Boot</key>
        <string>No</string>
        <key>Timeout</key>
        <string>5</string>
	<key>npci</key>
        <string>0x2000</string>
	<key>GraphicsEnabler</key>
	<string>Yes</string>
	<key>EthernetBuiltIn</key>
	<string>Yes</string>
	<key>UseKernelCache</key>
	<string>No</string>
</dict>
</plist>

+ busratio=165 cpu=2

encore merci !

il me reste le problème de la gestion 32/64 bit .

Lion installer works! Use the latest kernel and Myhack and it runs perfect

@frisco2this is very positive, gils

hello ,

ah ! oui ! que du bonheur , ça change du phenom ! je me croirais sur mon Xéon !

@misterfristaLion installer works! Use the latest kernel and Myhack and it runs perfect

just panic are you sure that it is supporting installer on my cpu non seee3

@$The-King$just panic are you sure that it is supporting installer on my cpu non seee3

Et avec -legacy busratio=16 UsekernelCache=No npci=0x2000 -v -f

@gilsEt avec -legacy busratio=16 UsekernelCache=No npci=0x2000 -v -f

i boot nearly with this flag any way i will try to re do lion on memory flash when got time

tried again with retail 10.7.3 & 10.7.0 but the the same panic
i think kernel doesnt support retail installing from boot

@$The-King$tried again with retail 10.7.3 & 10.7.0 but the the same panic i think kernel doesnt support retail installing from boot

're trying this distro, with the FX, it is able to directly boot my hack and I have not tested it on my t x4 960 but on a 1250 LE it loads but does not panic.

're trying with these flags: mach_amdv5 -legacy busratio=16 cpu=1 -v -f

bonne chance !

Help

this kernel looks like the best shot i got to put erase my snow leo and step up to lion but no one is putting a how to for the semi-noobs out there a.k.a me…so can some please tell me how they got this kernel to work with Lion...i have both retail lion and iATKOS L2...so out here

@dantekazumathis kernel looks like the best shot i got to put erase my snow leo and step up to lion but no one is putting a how to for the semi-noobs out there a.k.a me…so can some please tell me how they got this kernel to work with Lion...i have both retail lion and iATKOS L2...so out here

hello ,

Me neither, I'm not a kernel specialist, if you manage to install SL, you shall come easily to install Leo 10.7.

You wedged on what?

well i got retail 10.7.2 dmg i use myHACK to put it on my usb...then i took r:a:w:x86 kernel to see if i can get to the installation screen…first i use a simple -v flag to see where i might get errors at…but after it loads all the extensions the screen flashes that the caplock light flash then the screen lights up again but it stays black...i left it for over 10 hours(went to sleep)woke up still a black screen...so i tought it could be a graphics problem so i added the ATY kext that worked on my snow leo but still nothing ...so im bummed out because since i cant get a verbose output after the flash screen i cant really say what the problem is

@dantekazumawell i got retail 10.7.2 dmg i use myHACK to put it on my usb...then i took r:a:w:x86 kernel to see if i can get to the installation screen…first i use a simple -v flag to see where i might get errors at…but after it loads all the extensions the screen flashes that the caplock light flash then the screen lights up again but it stays…

i had same problem ,,, but i found out that kext for my video card use TWO screens instead of one , i knew it when i attached second screen to Mac, and then i saw everything in screen , so maybe this is problem for u too ,
or try remove all ATI- ATY - NV - INTEl kexts

ok, I am testing Lion DP1 and it's working GREAT!
All binaries are universal so it's working excellent without any troubles, I think I'll use the Lipo tool to create the universal binaries on the Final build 10.7.4 and see what happens it's way more stable on DP1 for me.

whaoooo!

for me it's just great, to blanGsak V4, an installation is possible via USB Direct + 1820 trunk option npci=0x3000 with the kernel and some hacks to RAWX86 mediaflashplayer and mozilla is the feast , I miss it more than yesterday. (not serious)

for the FX 6100, to install the flags: busratio=165 cpu=1 -v , the install finished, reboot into busratio=165 cpu=2 -v

for the youtube video, no synchronization between audio and video (C1E disable, cool n 'quiet enabled)

@gils

ouh man i am jealous u have fully working Lion awesome,

@ham4ever@gils ouh man i am jealous u have fully working Lion awesome,

^_^

hello,

I confirm that the installation based on a retail 10.7.3 without unibeast without MyHack is possible without any problems.
I used the old method of restoring from the HDD to usb utility at the base for Intel long before tonymachintrucbidouille and others think of something! ahahahha!

I copied the kernel of R:A:W:X86 and the Extra folder from my SL car and Simone! ahahahah!

This awesome AMD FX!

Google traduction .

(Y)

I realize this comes down to AMD FX, but what happens to the class AMD (Athlon 64 x2 QL)
without SSSE3?

can anyone write some scripte to delete ZZ folder in "" sudo rm -rf /private/var/folders/zz/ "" in some schedule , automatically repeat after every 5 minuts ,?

because whenever i get crash report then eat CPU , then i delete zz folder then crash report processor stop using CPU *

@ham4evercan anyone write some scripte to delete ZZ folder in "" sudo rm -rf /private/var/folders/zz/ "" in some schedule , automatically repeat after every 5 minuts ,? because whenever i get crash report then eat CPU , then i delete zz folder then crash report processor stop using CPU *

hello ,

I never managed to block the problem, hence the move to FX. we need a good soul we include the correction in the kernel.

should not neglect the FX work in 32 or 64 bit and not 32 and 64 bit.

Fortunately, 95% of the software is 64-bit. to install 32 bit softwares must return to 32 bit (-legacy)

Google traduction

@R:A:W:X86Solution for 32-Bit App crashes to be found in first post...

hello,

I thank you, I have a little trouble understanding everything, with terminal I hold, in addition to English, it's even worse.

I tried. the last time I used the terminal, I planted all!

you think ML 10.8 will work on AMD?

google translation

the latest kernel cant be downloaded
can any one upload it

@$The-King$the latest kernel cant be downloaded can any one upload it

Try this:

4 shared.com/zip/iuT7MWvW/test30_kernel.html?refurl=d1url

I'm having trouble getting Lion to boot. I've installed the retail 10.7.4 onto an external hd using my girlfriends MacBook. I then replaced the mach_kernel with the one from this thread and installed Chameleon with Chameleon Wizard. I then plugged the drive internally (SATA) into my PC. I boot it with -v busratio=18 and get stuck with "Still waiting for root device".

I've been playing with this for the past two days and have run out of ideas.

@starwa314I'm having trouble getting Lion to boot. I've installed the retail 10.7.4 onto an external hd using my girlfriends MacBook. I then replaced the mach_kernel with the one from this thread and installed Chameleon with Chameleon Wizard. I then plugged the drive internally (SATA) into my PC. I boot it with -v busratio=18 and get stuck with…

Salut,

essayes de brancher tes sata comme suit :

@starwa314Try this: 4 shared.com/zip/iuT7MWvW/test30_kernel.html?refurl=d1url

@starwa314I'm having trouble getting Lion to boot. I've installed the retail 10.7.4 onto an external hd using my girlfriends MacBook. I then replaced the mach_kernel with the one from this thread and installed Chameleon with Chameleon Wizard. I then plugged the drive internally (SATA) into my PC. I boot it with -v busratio=18 and get stuck with…

i got the same problem on a chi
truned to ide and added atiata i comiped it to lion
and got panic

@gilsSalut, essayes de brancher tes sata comme suit :

I've set it up as you suggested. It goes a bit further than before, but stops here:

It just stays there.

essayes les flags suivant :

UseKernelCache=No
PCIRootUID=1 ou 0
idlehalt=0
-legacy
cpu=1
cpu=2 etc…
-f
GraphicsEnabler=Yes ou No
-x -v
etc…

latest kernel working great in Lion 10.7.4 32 bits
Athlon X3 435

looking forward for 64 bits

@ R:A:W:X86

hello,

I'm hard on pa terminal, I tried pacther the kernel with the help of a colleague for the 32/64 bit, but nothing is there.
Have I missed something? thank you for giving me a boost.

traduction google .

Merci !

@ham4everlatest kernel working great in Lion 10.7.4 32 bits Athlon X3 435 looking forward for 64 bits

bonne nouvelle ! (Y)

@R:A:W:X86correct usage is: sudo -s amd_insn_patcher /usr/lib/dyld /usr/lib/dyld_patched cp /usr/lib/dyld_patched /usr/lib/dyld amd_insn_patcher /usr/lib/system/libsystem_kernel.dylib /usr/lib/system/libsystem_kernel.dylib_patched cp /usr/lib/system/libsystem_kernel.dylib_patched /usr/lib/system/libsystem_kernel.dylib update_dyld_shared_cache

Merci beaucoup !

I got it to boot using the FakeSMC.kext file. My problem now is that the computer freezes when I try to install driver pkgs when it says "Optimizing system for installed software...". Also GraphicsEnabler doesn't seem to be working with my gfx (GTS 250 1g). I'm booting with "-v busratio=18". Thanks for the help. I'm almost there:)

@R:A:W:X86

whaaaoooo !

tu es génial , merci beaucoup , avec l'aide de Nanael de Mac on Pc qui m'a saisi les codes dans terminal à l'aide de team viewer en mode -legacy , j'ai maintenant mon FX 6100 à 100% !
Encore un grand merci à toi !

excuse moi pour le Français .

@starwa314I got it to boot using the FakeSMC.kext file. My problem now is that the computer freezes when I try to install driver pkgs when it says "Optimizing system for installed software...". Also GraphicsEnabler doesn't seem to be working with my gfx (GTS 250 1g). I'm booting with "-v busratio=18". Thanks for the help. I'm almost there:)

bizarre ?

normalement , elle est oob avec GraphicsEnabler=Yes .

essayes avec busratio=18 UsekernelCache=No npci=0x3000 PCIRootUID=1 or 0 GraphicsEnabler=Yes
avec le chameleon trunk 1820 avec option SMBIOS Macpro3,1 .

bon courage !

excuses moi pour le Français .

@$The-King$i got the same problem on a chi truned to ide and added atiata i comiped it to lion and got panic

hello ,

et avec -legacy busratio=16 UsekernelCache=No

@gilsbizarre ? normalement , elle est oob avec GraphicsEnabler=Yes . essayes avec busratio=18 UsekernelCache=No npci=0x3000 PCIRootUID=1 or 0 GraphicsEnabler=Yes avec le chameleon trunk 1820 avec option SMBIOS Macpro3,1 . bon courage ! excuses moi pour le Français .

I've tried the commands you've stated and it causes my computer to stop at a grey screen while it's almost done booting.

I've also tried patching the dyld and libsystem_kernel.dylib files but my computer freezes a few seconds after running update_dyld_shared_cache.

@starwa314I've tried the commands you've stated and it causes my computer to stop at a grey screen while it's almost done booting. I've also tried patching the dyld and libsystem_kernel.dylib files but my computer freezes a few seconds after running update_dyld_shared_cache.

hello,

it is the comnandes our remarkable R:A:W:x86, I've only copied the commands with the patch on the desk and for me, it works very well.
you've got to make a mistake somewhere. I've had no bug when writing in terminal.

For my install I only use two kexts

Extra
Extensions
FakeSMC.kext
NullCPUPowerManagement.kext
modules
klibc.dylib
uClibcxx.dylib
org.chameleon.Boot.plist
smbios.plist

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>SMbiosvendor</key>
	<string>AppleInc.</string>
	<key>SMbiosversion</key>
	<string>MP31.88Z.006C.B05.0802291410</string>
	<key>SMboardproduct</key>
	<string>Mac-F42C88C8</string>
	<key>SMfamily</key>
	<string>MacPro</string>
	<key>SMmanufacturer</key>
	<string>AppleInc.</string>
	<key>SMproductname</key>
	<string>MacPro3,1</string>
	<key>SMserial</key>
	<string>G8135543XYL</string>
</dict>
</plist>

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Kernel Flags</key>
	<string>busratio=165 cpu=1</string>
        <key>Theme</key>
        <string>default</string>
</dict>
</plist>

+ npci=0x3000

les flags are for my CPU (FX 6100)

Can't download Kernels

I can't download any of the kernels from xup.in (timeouts).

Can anybody upload them (or at least the latest one) to mediafire or somewhere else?

@gils
I really appriciate your help. I've never seen anybody get past the booting phase with this particular motherboard, so I'm very happy with the progress.:)

The addition of NullCPUPowerManagement.kext has stopped the crashing with pkg installers and update_dyld_shared_cache. I'm still getting a grey screen with GraphicsEnabler=Yes.

I can't download any of the kernels from xup.in (timeouts).

Never mind - the links are working again.

@starwa314@gils I really appriciate your help. I've never seen anybody get past the booting phase with this particular motherboard, so I'm very happy with the progress.:) The addition of NullCPUPowerManagement.kext has stopped the crashing with pkg installers and update_dyld_shared_cache. I'm still getting a grey screen with GraphicsEnabler=Yes.

hello ,

l'USB3 peut être source de conflit , l'as tu désactivé . aussi , ta carte graphique est branché sur le premier port PCIE ?
également :

CIE = désactivé
S3 = activé
cool n' quiet = pas d'incidence
HPET= activé
o/c= défaut
ram= défaut
USB3= désactivé

normalement pour le reste c'est ok .

excuse pour le français car Google traduction n'est pas très au point .

still not allowed when copyes/delete some files…use mach_kernel test30

GA990FXA-UD7
Phenom X6 1090T
Radeon HD 6850
Bart 16 GB Of RAM
Seasonic M12II-620 Bronze

@gilsl'USB3 peut être source de conflit , l'as tu désactivé . aussi , ta carte graphique est branché sur le premier port PCIE ? également : CIE = désactivé S3 = activé cool n' quiet = pas d'incidence HPET= activé o/c= défaut ram= défaut USB3= désactivé normalement pour le reste c'est ok . excuse pour le français car Google traduction n'est…

I've set the motherboard as you've written, but I'm still getting the same results.

I had the same problem till I patched only one of the dyld´s!
I don´t remember which of the two I patched, so you will have to try it on your own!

With both files patched I got the same error! I also think I told this here before!

Down To Test

Great work you're doing here.
I'm new to Hackintosh and would love to help test

AMD FX-8150
Asus Crosshair V Formula
128gb OCZ Vertex 3 SSD
128gb M4 Crucial SSD
32gb Corsair Vengence DDR3
Custom AMD Liquid Cooling

I have a Macbook Pro and access to Lion.dmg and ML.dmg

I just need instructions for install
I've found these
geek nizer.com/install-osx-mountain-lion-on-pc-hackintosh-usb/
and wanted to see if they applied.

Also dl'ed kernel and other files provided in thread.

If you want PM me or idk if you have IRC

@cathedralmurderGreat work you're doing here. I'm new to Hackintosh and would love to help test AMD FX-8150 Asus Crosshair V Formula 128gb OCZ Vertex 3 SSD 128gb M4 Crucial SSD 32gb Corsair Vengence DDR3 Custom AMD Liquid Cooling I have a Macbook Pro and access to Lion.dmg and ML.dmg I just need instructions for install I've found these geek…

Hi,

Yet for ML 10.8 but you can do an install Lion 10.7 or with unibeast Myhack.

R:A:W:X86

any plan for Athlon II to work in 64 bits ? or does it have any chance ?

thank u for all work u did, is amazing

@ham4ever

It has been written x times in the current amd threads that it will never work if nobody will write an ssse3 emultator, cause the old amd don´t support it.

@R:A:W:X86Most of the avaible tutorials for Lion Retail installation on Intel machines should also apply to FX based setups, just that mach_kernel has to be replaced with the patched one & you need to patch sysenter traps after installation & update for 32-Bit software to work. Nice high-end build btw. I have been contemplating one of those…

thanks man
I'm going to get cracking on this today
ill update with progress and now they have the vertex 4
looks yummy hahaha

Hello everybody!

So i have successful Lion with iatkos L2 installation in my specs:

PIIX4 965 Revision Deneb C3
M4a77T/USB3.0 (USB3.0 OFF)
HD6870 Dual Fan Barts XT
2x 4GB DDR3 1333Mhz Kingston!
HDD 1TB SATA SEAGATE With 3 Partitions (Snow 1st Lion 2nd Windows 7 3rd)

Well... i can boot in any of the 3 OS without problems and i don't have problem with copy and paste in Lion

Thanks for VERY NICE KERNEL!

PS: I am a girl u.u. Greetings from Brazil!

Next Step is to Fix my Text Editor Sometimes Wont Open ;(

@gabrielayumiHello everybody! So i have successful Lion with iatkos L2 installation in my specs:

awesome , did u used iatkos L2 directly, or used Snow leopard to install Iatkos ?

It just has come to my mind: we have patches for AMD, made by bronzovka and rawx86. Using some text tool, can't we just separate the specific AMD instructions by comparing with the vanilla source and then apply them to the Mountain Lion source? Or even better, following and useful advice from Meklort, apply them as a binary patch to the Mountain Lion binary? It would be possible to test it?

If yes, i'm willing to do it and make the experiment. Can someone point me to some text tool that make possible to compare and extract the differences between two texts (these would be the patched kernel and the vanilla kernel) saving me the time to do it by eye, so i can re-patch it and compile it for mountain lion instead?

Can someone explain me what tools and procedures do i use to apply a binary patch to the binary kernel?

I'll really beg you to forgive me if i look stubborn right now, RAW, but i was talking about using the 64-bit patched kernel of yours (yes, that one that gives us instant reboots) and apply these patches of yours to the source code (or, even better, to the binary, as meklort advised) of the new XNU (which is also 64-bit, of course) to see what happens.

Let's say i really wanna try it myself and see what happens: what text tools do i use to this task, so i don't have to examine line by line of the code? Thank you very much for answering!

@ham4everawesome , did u used iatkos L2 directly, or used Snow leopard to install Iatkos ?

hi i have one tutorial in osx86.net in Potuguease.

yes i have used Snow Leopard to install iatkos in another partition (2nd partition) and replaced the kernel and my appleatiata kext for my motherboard and... Azalia HD audio for Audio.

after that you need to upgrade your bootloader to the last version... and the bootflags PCIRootUID=1 -legacy UseKernelCache=No -v -f if your system wont boot at first time try again... if wont boot again ask here in forum i think we can help you

Greetings From Brazil!

Reporting back from my experiment: in the end you were right, RAW, as expected btw: it ain't that easy. So the transition to Mountain Lion will be a troubled one for AMD hackintoshes, also as expected.

How are your own experiments doing?

I'm running Lion 10.7.4 and, as i said, it runs just fine on my PC. But 32-bit only, so no Finder and other 64-bit apps (even my CPU being a 64-bit capable CPU; ssse3 is crucial for Lion to support 64-bit apps on 32-bit mode).

With Mountain-Lion, as said in various places, including here, we'll definitely need a ssse3 emulator for non-FX CPUs, but even that won't be enough: until now, we couldn't get a Lion 64-bit kernel to work on AMD CPUs, even Buldozer ones; the maximum we got was 64-bit app support, only on Buldozer CPUs. To run Mountain Lion, we've got to do better than that: we'll need a 64-bit kernel and the ssse3 emulator (a static one, easier than the previous on the fly sse3 emulator, but still no easy a task) for the non-FX CPUs. So the mountain to climb is high indeed.

Yeah but i have a Phenom 965 x4 and i can run any app in my Lion 10.7.4 without Problem i just asking for a problem with Open some apps like a Text Editor and some times i have the problem with Copy and paste.

RAWX86, you will fix this problem in your next version of this kernel? Thanks

Are you really sure of it, Gabriela?

Do you use the stock Finder, or the DP2 Finder instead? Have you tried parallels desktop 7? And the new Xcode, does it work without issues? These are 64-bit apps which should not run by any means on your CPU, since it doesn't support ssse3.

If you made these apps above to work with a Phenom 965 x4, you made a breakthrough discovery and should share your methods...

As for copy/paste and permission bug fixes, read the entire content of this thread and the other at infinitemac, AMD with Lion.

@misterfristaYou have to do the following steps: -First download the amd_insn_patcher -Open a terminal and type "sudo su" to without quotes to become root -Change into your downloaded amd_insn_patcher directory with the terminal You can do this by typing "cd " (without quotes) and then droping the amd_insn_patcher directory from finder into the…

I have a 10.7.3 hackintosh in my fx-6100 and i would love to try this out. Buyt i just cant do it correctly. Sorry, my first mac and hackintosh.

cp /usr/lib/system/libsystem_kernel.dylib ./libsystem_kernel.dylib.orig
./amd_insn_patcher dyld.orig dyld.patched
./amd_insn_patcher libsystem_kernel.dylib.orig

is this suppose to be a one line of 3lines? But eigther way only return "No such file or directory".

@The ConnacticAre you really sure of it, Gabriela? Do you use the stock Finder, or the DP2 Finder instead? Have you tried parallels desktop 7? And the new Xcode, does it work without issues? These are 64-bit apps which should not run by any means on your CPU, since it doesn't support ssse3. If you made these apps above to work with a Phenom 965 x4,…

i think she run only 32 bit , because she use -legacy ,

It means that your system doesnt find the amd_insn_patcher. In other words you have to copy the dyld files into the same directory as your downloaded amd_insn_patcher. Switch into the directory in your console and then type: ./amd_insn_patcher dyld.orig dyld.patched and press enter. Maybe you didnt rename dyld to dyld.orig? No such file or directory means in this case that one of the binarys isnt found.

okay, so i executed the commands inside the directory where i put the downloaded files (desktop), unfortunately, i could no longer execute the last 2 commands because the i got this mac dead screen. Tried booting back either in single user, safe mode but to no avail. Im just greeted with the dead screen in the login menu. Is there anything i can do to fix this? I followed the instruction and used another command windows, login as administrator by typing sudo su.

thanks to RAWX86 and everyone else that has contributed to this. I have 10.7.4 running with only a few hiccups on a Bulldozer. One of those is that I get nothing when I right click on any file an choose Get Info. Also, I get occasional 30 second slowdowns (spinning beach ball) mostly when browsing the Internet on any Browser. Have done every patch and tweak mentioned on this thread. I initially installed Snow Leopard using Iatkos and have incrementally upgraded from there. I'm using finder from DP2 on latest RAW kernel. Many thanks!

@jcvcmsthanks to RAWX86 and everyone else that has contributed to this. I have 10.7.4 running with only a few hiccups on a Bulldozer. One of those is that I get nothing when I right click on any file an choose Get Info. Also, I get occasional 30 second slowdowns (spinning beach ball) mostly when browsing the Internet on any Browser. Have…

Hello ,

buldo your work in 64 bit, so no need to Finder DP2, and management 32/64 bit, used the AMD patch D'ANV.
For me, it works 100% bug free.

osx 86.co/f100/10-7-4-amd-kernel-t7687/page32.html

osx 86.co/f36/legacy-kernel-10-6-8-with-custom-dyld-t7318/post55947.html

osx 86.co/attachment.php?attachmentid=1645&d=1320876221

Many thanks gils, I restored to original Finder for 10.7.4 using Pacifist and everything seems to be working perfectly!

@The ConnacticAre you really sure of it, Gabriela? Do you use the stock Finder, or the DP2 Finder instead? Have you tried parallels desktop 7? And the new Xcode, does it work without issues? These are 64-bit apps which should not run by any means on your CPU, since it doesn't support ssse3. If you made these apps above to work with a Phenom 965 x4,…

Just follow what gils is talking about... and your problems will be done!

Yes i use DP2 Finder... i'll test the finder of 10.7.4 later in 64 bit mode in my own custom kernel later i'll post the screen shots if then works

My system already works like a charm, Gabriela!

In 32 bit, like yours. No original Finder, no latest Xcode, no Parallels7 (but i have a workaround to make P6 work in Lion, then this issue is solved as much is i'm concerned).

@The ConnacticMy system already works like a charm, Gabriela! In 32 bit, like yours. No original Finder, no latest Xcode, no Parallels7 (but i have a workaround to make P6 work in Lion, then this issue is solved as much is i'm concerned).

Is Adobe Photoshop CS6 & illustrator CS6 work?

No, they don't, since the adobe cs6 installer itself needs to run at 64-bit some time after it starts. To have cs6, stock finder and other 64-bit apps running, you'll need either an intel or a bulldozer (fx-series) amd system.

@The ConnacticMy system already works like a charm, Gabriela! In 32 bit, like yours. No original Finder, no latest Xcode, no Parallels7 (but i have a workaround to make P6 work in Lion, then this issue is solved as much is i'm concerned).

Hi, how did you able to make it work? I been trying this for a while and re-installed atleast 6times because when i try to do as per rawr instruction of patching, my computer would be in kernel panic. I was able to replace the kernel but to make the 32bit apps work, no success. Please help..

I'm not sure if i understand this patching thing altogether. I'll tell you though how i get where i am right now:

1) Installed Snow Leo Hazard 10.6.2 sse2 sse3, then installed Lion in another HD using devout's method: http://www.insanelymac.com/forum/index.php?showtopic=27… ↗ (used moderate method);

2) Downloaded 10.7.4 combo update from apple, ran it and changed the kernel before rebooting pretty much like the previous installation, this time using RAW's kernel from first page of this thread;

3) Had the infamous permissions bug, that kept me from everyday tasks like installing programs. Solved it using another kernel from RAW (look for it at this thread);

4) Still had copy and paste issues. To solve this, a) started to use Path Finder app and b) used bronzovka instructions (attention: just the instructions, not the kernel) from this topic: osx 86.net/view/2723-amd_kernel_v6_for_10.7.4.html
I don't if a), b) or the combination of both is the winner, but the copy and paste issues disappear;

5) I thought these instructions of bronzovka would solve the issue that keeps the core apps from opening x minutes after the startup (so i have to open them all just after logging in or forgetting about them at all) but it doesn't happen. Maybe that is the only dent at the 32-bit perfection of my Lion system.

Hope that helps!

Are the instructions one of the mods/owners of InfiniteMac sent me back in 04-14-2012 the most recent instructions or have they came up with easier ways to install Lion onto Amd Phenom IIx4 965? His instructions was to be on Hackintosh Snow Leopard and edit a DMG iATKOS L2 DMG file with updating its content to be more compatible with AMDs. I got kind of confused and I have messed up several times following his guide. Does anyone happen to have a video guide? I can't screw up a video guide or can I? ^_^

It sucks that ever since my gtx 470 died I can't run snow leopard at 1920x1200 resolution, because I was satisfied with Snow Leopard. But now I'm forced to find a way to get Lion to work with my rig because I believe Lion has support for gtx 570?

Specs

Amd Phenom II x4 965 3.4ghz
ASUS M4A79XTD EVO
Gigabyte GTX 570
4 gigs ddr3 ram

Oh, that's really pretty tough specially because i still need another hd for the process which i dont really have one at the moment. Second is that, getting a copy of mac os x distro is quite really hard for me because that's ussually 5gb+- to download and i can't find any direct download link for it (like Mediafire), just all torrent which is really slow. But i manage to have this Niresh ditro which is 10.7.3 and I can make it work no sweat for 18 minutes and with everything just fine OOTB (sounds, lan, display), copy/paste and finder are also not an issue.

What really keeps my win7 at the moment is that i cant make it work with 32bit apps like mac office. Ive already quit from installing the update to 10.7.4 in which i really sweat for almost a week re-installing over and over again because I cant really make it work so i just decided to install xcode 4.3 which is the main reason getting that said update.

So, I would really be sticking to mac osx if i could just make this work with 32bit apps because everytime I try those sets of instruction posted here including

sudo -s amd_insn_patcher /usr/lib/dyld /usr/lib/dyld_patched cp /usr/lib/dyld_patched /usr/lib/dyld amd_insn_patcher /usr/lib/system/libsystem_kernel.dylib /usr/lib/system/libsystem_kernel.dylib_patched cp /usr/lib/system/libsystem_kernel.dylib_patched /usr/lib/system/libsystem_kernel.dylib update_dyld_shared_cache

would freeze my system and goes kernel panic.

Sir RAWR, what do i missed why i keep getting this same result over and over or shall i really need to have a working 10.7.4 update to use this?

I believe Jhusly and I have same problem. That is why I'm going to erase both my two harddrives with DBAN. Than I'm going to set up Snow Leopard on one of my harddrives and try the method of getting Lion to install on the other harddrive. If I successfully do this, I will than erase only my snow leopard harddrive than I will install Windows 7 again. If Lion disappears when I install Windows 7 on the other harddrive that I erased Snow Leopard off I will use EasyBCD and use that as a dual boot program. I hope I conquered the unconquerable and have solved my issues. Right now I'm backing stuff up on Windows on one of my ext harddrives.

@jhuslyOh, that's really pretty tough specially because i still need another hd for the process which i dont really have one at the moment. Second is that, getting a copy of mac os x distro is quite really hard for me because that's ussually 5gb+- to download and i can't find any direct download link for it (like Mediafire), just all torrent…

Hi,

What kind of processor you have? for me it works very well.
you to do is the best facility for retail as Intel installation methods.

RAWX86 command is only valid for FX procs which is activate the 32/64 bit at the same time.

The rest I started a tutorial for installing 10.7.4 retail + SHIFT.

hack-my mac.fr/index.php/forum/48-pc-bureau/28494-tutoriel-amd-en-travaux

hack-my mac.fr/index.php/forum/24-problemes-d-installation-pc-amd/28172-blangsak-v4-10-7-4-avec-kernel-amd

Since i'm not one of the mods/owners of infinitemac, i don't know. You can try the method i just posted, since i, as you, don't have a ssse3-enabled Bulldozer CPU. It worked for me, maybe it works for you. Installing OsX in general (and Lion particularly) on any kind of AMD machine is never a piece of cake and. There's no AMD-supportive Uni/Multibeast-like method and probably there never will.

@gilsWhat kind of processor you have? for me it works very well. you to do is the best facility for retail as Intel installation methods. RAWX86 command is only valid for FX procs which is activate the 32/64 bit at the same time.

I have FX-6100 cpu which is a bulldozer just like RAWR, that's the main reason i keep on trying this to work since he mention that his macosx is now working smoothly after the partch which i am also hoping to do on mine. If i could just make 32bit apps work on mine, i would seriously be moving to mac.

Thanks and i would be checking you tutorial too.

@The ConnacticSince i'm not one of the mods/owners of infinitemac, i don't know. You can try the method i just posted, since i, as you, don't have a ssse3-enabled Bulldozer CPU. It worked for me, maybe it works for you. Installing OsX in general (and Lion particularly) on any kind of AMD machine is never a piece of cake and. There's no…

I guess my CPU has a SSE3 enabled in it since its a bulldozer. And as Ive said, getting a copy of any macosx distro is one of the hardest part of this whole process, i just want to make it work what i currently have if possible.

jhusly, my answer was to Godofwar; checkout his specs (which points to a clearly non ssse3 system - don't confuse it with sse3, please! - because of his phenom CPU):

@GodofwarSpecs: Amd Phenom II x4 965 3.4ghz ASUS M4A79XTD EVO Gigabyte GTX 570 4 gigs ddr3 ram

I should've made it clear, but i didn't notice there was other answers after his, including yours. In fact, i answered you before answering Godofwar, just check out my anterior post.

Oh, you already did and answered it, jhusly.

Well, the method i described works with Niresh's distro too, but now i see we have different issues to cope with: my system, non-ssse3, does not work with 64-bit apps. Your system, Bulldozer ssse3, only works with 64-bit apps, so you need the RAW patch to be applied properly. Well, i cannot help you, you'll have to wait for RAW to answer, i'm afraid.

@ jhusly

hello,

what kext you are using for your system?

@ Connatic : sorry about it too man, that was clearly a misunderstanding! And yeah, you are right, we have a contradictory problem. LOL

@gils, i no longer needed to install additional kext like from multibeast since niresh already have it consolidated on his distro but what I selected using his release are :

Chemeleon Bootloader
AMD Kernel
AppleATIATA
VoodooHDA
Ralink Driver for wifi (which dont work because its laucnher is a 32bit application)
Realtek 81xx for LAN (dont know if it really works because i only use broadband stick for connection)
No kext for video and enabler since my graphics works ootb

that's what i remember so far since im here in the office at the moment but ill check it back again later. So, is your system stable now?

@ jhusly

bah!? What is all this kext? 're avoiding the distros can be Niresh.
You do a clean install with a retail 10.7.

You deleted your AppleHDA before installing your VoodooHDA?

I managed to do a quick read of your blog with google translate unfortunately i wasnt able to catch everything specially those that are in images since i dont know french. Im gonna check it again when im home.

And thanks!

@gils@ jhusly bah!? What is all this kext? 're avoiding the distros can be Niresh. You do a clean install with a retail 10.7. You deleted your AppleHDA before installing your VoodooHDA?

I really wanted to do a clean install so i would be able to do it from scratch unfortunately I cant get a hand of any virgin 10.7 release, what i have is only Niresh 10.7.3 DVD release and thats what im really trying to make it work. Just to make 32bits apps run and it would sure make my week!

I dont remember AppleHDA being checked as default. Note that i got this options to choose which kext would be included during the installation, not afte because i dont also have an idea what idea realease might look like.

@jhuslyI really wanted to do a clean install so i would be able to do it from scratch unfortunately I cant get a hand of any virgin 10.7 release, what i have is only Niresh 10.7.3 DVD release and thats what im really trying to make it work. Just to make 32bits apps run and it would sure make my week! I dont remember AppleHDA being checked as…

hello ,

Ive really tried that several times but before i could type in "update_dyld_shared_cache", my system hangs up and go into kernel panic. I either personally type it in or even just copy/paste the commands but im still getting the same error. I try restarting the system after that but it would still give me a kernel panic at the login screen so i have to re-install over again.

@jhuslyIve really tried that several times but before i could type in "update_dyld_shared_cache", my system hangs up and go into kernel panic. I either personally type it in or even just copy/paste the commands but im still getting the same error. I try restarting the system after that but it would still give me a kernel panic at the login…

normal, si tu mets ton dossier amd patcher sur le bureau, il te Faut rajouter

~ / Desktop / amd blablabla …

Normally, if you put your file on the desktop amd patcher, you need to add

~ / Desktop / AMD blah …

oh? What i did is,

"sudo su"
type password
"cd Desktop/amd_insn_patcher_src"
"./amd_insn …"
does that make a difference? Im really so sorry, im really not good in commands...
but if you would try to look at the picture i posted with the the kernel panic, i think the first sets of commands works as there are patching going on in there...

@jhuslyoh? What i did is, "sudo su" type password "cd Desktop/amd_insn_patcher_src" "./amd_insn …" does that make a difference? Im really so sorry, im really not good in commands... but if you would try to look at the picture i posted with the the kernel panic, i think the first sets of commands works as there are patching going on in there...

c'est pour localisé ton dossier amd patcher , pour ton panic , c'est certainement dû au conflit entre AppleHDA et voodooHDA , on installe jamais ces 2 pilotes ensembles , cause de KP .

Excuses moi pour le Français , Google traduit vraiment très mal .

I see, so you mean VoodooHDA and AppleHDA kext might have been the reason for conflict that's why its giving me a kernel panic? Okay thanks, i would try to look at it when im back home and do it over again. I hope i get it right this time.

Really thank you for your time.

@jhuslyI see, so you mean VoodooHDA and AppleHDA kext might have been the reason for conflict that's why its giving me a kernel panic? Okay thanks, i would try to look at it when im back home and do it over again. I hope i get it right this time. Really thank you for your time.

si tu veux faire bien , utilises cette méthode d'installation .

hack-my mac.fr/index.php/forum/48-pc-bureau/28494-tutoriel-amd-en-travaux#28908

ce sera largement mieux que ces distros pas terrible .

Strange. I always had AppleHDA.kext and VoodooHDA.kext both installed side by side on my system, and never had any problems (AppleHDA doesn't even load). Maybe i'm lucky.

Ive tried again based on your suggestions but im still getting the same result. There lot of people who were able to succeed using the same trick/command but it just doesnt work on mine and I dont know why? :facefalm:

@jhuslyIve tried again based on your suggestions but im still getting the same result. There lot of people who were able to succeed using the same trick/command but it just doesnt work on mine and I dont know why? :facefalm:

it's weird anyway?
Can you describe your hardware?

You should reboot with -v -f to locate the error

Hardware :
FX-6100
Asrock 970 Extreme 3
4gbx2 G.Skill Ripjaws
HD 5770
250gb WD

I always do that if i cant boot normally. Everytime doing this, the boot process stops at the last part where its still booting with chameleon background because it is suppose to continue at verbose with only black screen background.

@jhuslyHardware : FX-6100 Asrock 970 Extreme 3 4gbx2 G.Skill Ripjaws HD 5770 250gb WD I always do that if i cant boot normally. Everytime doing this, the boot process stops at the last part where its still booting with chameleon background because it is suppose to continue at verbose with only black screen background.

I do not manage to understand what blocking you is always the same kext or you're limited only FakeSMC.kext and NullCPUPowerManagement.kext ?

@gilsI do not manage to understand what blocking you is always the same kext or you're limited only FakeSMC.kext and NullCPUPowerManagement.kext ?

What do you mean about those two kext? Is there any way we could get a copy of the log during the boot so we would be able to clearly read it and maybe find out any reason of errors?

One more thing, do we also need to install RAWS custom kernel before patching?

@jhuslyWhat do you mean about those two kext? Is there any way we could get a copy of the log during the boot so we would be able to clearly read it and maybe find out any reason of errors? One more thing, do we also need to install RAWS custom kernel before patching?

Hello,

I send you the historical events since installation, and startup last kernel.log
I can help it.

I always using the kernel RAWX86

good luck

avec un DSDT.aml

npvhash=4095
PAE enabled
64 bit mode enabled
rtclock_init: Taking bus ratio path 0 (Boot-time argument)
TSC: Reported FSB: 0.0000MHz, corrected FSB: 200.679830MHz
TSC: Verification of clock speed failed. Fallback correction was performed. Please upgrade bootloader.
TSC: Frequency = 3311.217196MHz, FSB frequency = 200.679830MHz, bus ratio = 16.5
Darwin Kernel Version 11.4.0: Mi 18 Jul 2012 02:24:10 CEST; bronzovkAnVoodoo v0.9.30:xnu-1699.26.8/BUILD/obj/RELEASE_I386
vm_page_bootstrap: 1004426 free pages and 35958 wired pages
zone leak detection enabled
standard timeslicing quantum is 10000 us
mig_table_max_displ = 73
warning: skipping personalities in blacklisted kext com.apple.driver.AppleIntelCPUPowerManagement
NullCPUPowerManagement::init: properties=0x7ee4600
NullCPUPowerManagement::start
AppleACPICPU: ProcessorId=7 LocalApicId=7 Disabled
AppleACPICPU: ProcessorId=8 LocalApicId=8 Disabled
AppleACPICPU: ProcessorId=1 LocalApicId=16 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=17 Enabled
AppleACPICPU: ProcessorId=3 LocalApicId=18 Enabled
AppleACPICPU: ProcessorId=4 LocalApicId=19 Enabled
AppleACPICPU: ProcessorId=5 LocalApicId=20 Enabled
AppleACPICPU: ProcessorId=6 LocalApicId=21 Enabled
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

MAC Framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x21 Vectors 64:87
IOAPIC: Version 0x21 Vectors 88:119
ACPI: System State [S0 S3 S4 S5]
PFM64 (44 cpu) 0xfff10000000, 0xf0000000
[ PCI configuration begin ]
[ PCI configuration end, bridges 5 devices 22 ]
RTC: Only single RAM bank (128 bytes)
RTC: lost battery power - time may be invalid
HPET: probeHPET failed
FakeSMC: opensource SMC device emulator by netkas (C) 2009
FakeSMC: plugins & plugins support modifications by mozodojo, usr-sse2, slice (C) 2010
FakeSMCDevice: 17 preconfigured keys added:
FakeSMCDevice: successfully initialized
HDAEnabler: Copyright (c) 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
mbinit: done [64 MB total pool size, (42/21) split]
Pthread support ABORTS when sync kernel primitives misused
USBF: 1.519 AppleUSBEHCI[0x82bc000]::CheckSleepCapability - controller will be unloaded across sleep
USBF: 1.743 AppleUSBEHCI[0x82bc800]::CheckSleepCapability - controller will be unloaded across sleep
USBF: 1.744 AppleUSBEHCI[0x82c5800]::CheckSleepCapability - controller will be unloaded across sleep
HDAEnabler: Copyright (c) 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
com.apple.AppleFSCompressionTypeDataless kmod start
USBF: 1.796 AppleUSBOHCI[0x806c000]::CheckSleepCapability - controller will be unloaded across sleep
USBF: 1.807 AppleUSBOHCI[0x826d800]::CheckSleepCapability - controller will be unloaded across sleep
USBF: 1.807 AppleUSBOHCI[0x826d000]::CheckSleepCapability - controller will be unloaded across sleep
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless load succeeded
com.apple.AppleFSCompressionTypeZlib load succeeded
rooting via boot-uuid from /chosen: 04C30A2C-DEE5-3D12-9834-DD86E8F6E7F8
From path: "uuid", Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
USBMSC Identifier (non-unique): 07951B028D6D0048 0x13fe 0x3100 0x110
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@180000/AppleACPIPCI/SATA@11/AppleAHCI/PRT4@4/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/ST3160812AS Media/IOGUIDPartitionScheme/Sans titre 1@2
BSD root: disk1s2, major 14, minor 4
jnl: unknown-dev: replay_journal: from: 6996992 to: 1933824 (joffset 0x257000)
USBF: 7.626 AppleUSBOHCI[0x7819000]::CheckSleepCapability - controller will be unloaded across sleep
jnl: unknown-dev: journal replay done.
hfs: Removed 8 orphaned / unlinked files and 17 directories
macx_swapon SUCCESS
Waiting for DSMOS...
Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1
Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200
SMC::smcReadKeyAction ERROR $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0
Previous Shutdown Cause: 3
SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
jnl: disk1s3: replay_journal: from: 6466048 to: 23040 (joffset 0x253000)
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
WARNING: IOPlatformPluginUtil : getCPUIDInfo unknown CPU family: family 0x15, model 0x1
-- power management may be incomplete or unsupported
DSMOS has arrived
** Device in slot: SLOT--1 **
AppleRTL8169Ethernet: Ethernet address
jnl: disk1s3: journal replay done.

Ive tried once again hoping i would be lucky this time but i still get the same result. My system went into kernel panic after applying mad_insn patch. I also tried RAWX kernel posted in the first page but my system slows down terribly. Maybe the problem in the distro release itself and i would be stuck having a lion 10.7.3 with only 64bit support.

I'm still downloading the torrent you gave but i can't even get close to 5% because its so slow.

Anyway, thank you so much for you effort responding to me.

@ Gils
I saw you took the HDA-Enabler on your System, is it working?
The reason why i ask is that i don´t saw a AMD-System until now where it was working.

@wastez@ Gils I saw you took the HDA-Enabler on your System, is it working? The reason why i ask is that i don´t saw a AMD-System until now where it was working.

No, HDEnabler does not work, I tried the patched DSDT patch with the ALC 892 without result, I just info for the presence of audio in Audio (integrated)

I only have two harddrives in my computer. One of them is installed with Windows 7 and the other isn't installed with anything. If I partition the other one and make it into two different drives can I install hackintosh snow leopard onto it than install lion and put the amd kernel in it or would this cause too many problems? I think I did this in the past and I ended up messing up my entire computer. Keep in mind I use EasyBCD program to dual boot Windows 7 and Hackintosh Snow Leopard because I've never been able to dual boot both of these operating systems without EasyBcd.

@R:A:W:X86I am currenlty doing some experiments on this - but you should not expect a working solution - especially not within a short time.

Raw, what about your Mountain Lion experiments? Any success?

I don't know if i said it before, but thank you for the FileMerge tip.

@gilsNo, HDEnabler does not work, I tried the patched DSDT patch with the ALC 892 without result, I just info for the presence of audio in Audio (integrated)

So i would delete the kext if it is not working.

@wastezSo i would delete the kext if it is not working.

in fact, I'd make it work, it must be a story devid, it would be interesting to develop the kext.

works how your ALC 888 ? with VoodooHDA ?

@gilsin fact, I'd make it work, it must be a story devid, it would be interesting to develop the kext. works how your ALC 888 ? with VoodooHDA ?

The problem is not the device id (it´s correct), the problem also appear if you inject it with dsdt on every amd system i tried. On Intel it was with the same device id no problem.

The only way to get it work is VoodooHDA.

@wastezThe problem is not the device id (it´s correct), the problem also appear if you inject it with dsdt on every amd system i tried. On Intel it was with the same device id no problem. The only way to get it work is VoodooHDA.

one thing I do not understand the devid is the same for 2.7.2 and VoodooHDA ALC 892 ? how is it that VoodooHDA malfunctioning but it works ?

HDAE ALC 892 :

</dict>
			<key>IOClass</key>
			<string>HDAEnabler</string>
			<key>IOPCIClassMatch</key>
			<string>0x04030000&0xffff0000</string>
			<key>IOProbeScore</key>
			<integer>600</integer>
			<key>IOProviderClass</key>
			<string>IOPCIDevice</string>
		</dict>

voodooHDA :

<key>VoodooHDA</key>
		<dict>
			<key>CFBundleIdentifier</key>
			<string>org.voodoo.driver.VoodooHDA</string>
			<key>IOClass</key>
			<string>VoodooHDADevice</string>
			<key>IOMatchCategory</key>
			<string>VoodooHDADevice</string>
			<key>IOPCIClassMatch</key>
			<string>0x04030000&0xffff0000</string>
			<key>IOProviderClass</key>
			<string>IOPCIDevice</string>
			<key>IOUserClientClass</key>
			<string>VoodooHDAUserClient</string>
			<key>InhibitCache</key>
			<true/>
			<key>MixerValues</key>
			<dict>
				<key>iGain</key>
				<string>90</string>
				<key>iMix</key>
				<string>0</string>
			</dict>
			<key>NodesToPatch</key>
			<array>

one thing I do not understand the devid is the same for 2.7.2 and VoodooHDA ALC 892 ? how is it that VoodooHDA malfunctioning but it works ?

HDAE ALC 892 :

</dict>
			<key>IOClass</key>
			<string>HDAEnabler</string>
			<key>IOPCIClassMatch</key>
			<string>0x04030000&0xffff0000</string>
			<key>IOProbeScore</key>
			<integer>600</integer>
			<key>IOProviderClass</key>
			<string>IOPCIDevice</string>
		</dict>

voodooHDA :

<key>VoodooHDA</key>
		<dict>
			<key>CFBundleIdentifier</key>
			<string>org.voodoo.driver.VoodooHDA</string>
			<key>IOClass</key>
			<string>VoodooHDADevice</string>
			<key>IOMatchCategory</key>
			<string>VoodooHDADevice</string>
			<key>IOPCIClassMatch</key>
			<string>0x04030000&0xffff0000</string>
			<key>IOProviderClass</key>
			<string>IOPCIDevice</string>
			<key>IOUserClientClass</key>
			<string>VoodooHDAUserClient</string>
			<key>InhibitCache</key>
			<true/>
			<key>MixerValues</key>
			<dict>
				<key>iGain</key>
				<string>90</string>
				<key>iMix</key>
				<string>0</string>
			</dict>
			<key>NodesToPatch</key>
			<array>[/QUOTE

The device id is not the same, in this kexts a hole id range is selected.
Normaly VoodooHDA should work out of the box, of course just if you delete the other enabler…
The device id of my soundcard is 4383.

Got to boot my lion 10.4 on amd penom

I got my lion 10.4 up on the mad phenom ,now getting a circle with a cross on all 64 bit application s,on licking it says "You can't open the application AutoCAD 2013 because it is not supported on this type of mac"
Also flash movie are crashing out .Please advice how to fix this ,eveything else is working fine.

@arnabiitrI got my lion 10.4 up on the mad phenom ,now getting a circle with a cross on all 64 bit application s,on licking it says "You can't open the application AutoCAD 2013 because it is not supported on this type of mac" Also flash movie are crashing out .Please advice how to fix this ,eveything else is working fine.

http://www.insanelymac.com/forum/index.php?showtopic=27… ↗

@arnabiitrI got my lion 10.4 up on the mad phenom ,now getting a circle with a cross on all 64 bit application s,on licking it says "You can't open the application AutoCAD 2013 because it is not supported on this type of mac" Also flash movie are crashing out .Please advice how to fix this ,eveything else is working fine.

*looool*
Lion doesn´t work on old AMD in 64 bit mode, so there is no fix for it. (Just new Bulldozer works in it)
So you have to find a 32 bit alternative if you want to use Lion. (or write a ssse3 emulator)

http://www.insanelymac.com/forum/index.php?showtopic=28… ↗

Lion 10.7.5 update is out! Has anyone tried to boot it with RAW's 10.7.4 kernel?

Tried 10.7.5,too. It´s kind of unstable on my system!
Itunes for example freezes all the time while loading and the system itself freezes for seconds from time to time.

I´m looking forward to a new kernel though i´m not in hurry, because my 10.7.4 works great

What's wrong with my system? I installed 10.7.3 on fx-6100 but i cannot do the following :

- update to 10.7.4 would cause the system on continuous reboot
- using RAWX legacy kernel would make the system so sluggish
- applying amd_insn_patcher cause kernel panic before updating dyld shared cache and everytime after system loads.

Is there any kext in conflict with the update?

@jhuslyWhat's wrong with my system? I installed 10.7.3 on fx-6100 but i cannot do the following : - update to 10.7.4 would cause the system on continuous reboot - using RAWX legacy kernel would make the system so sluggish - applying amd_insn_patcher cause kernel panic before updating dyld shared cache and everytime after system loads. Is…

salvation,

deleted everything that is susceptible to not spend Update:

sleepenabler
VoodooHDA
HDAE RTL 8xxx
etc. …
and any other kext that you have added.
prefer mkext in E / E + HDD root DSDT if necessary, I went in 11.5 without any problem, think AppleFileSystemDriver.kext replace the kernel and repair permissions with Disk Utility.

google traduction

je suis passé en version 11.5 ! ^_^^_^^_^

@gilssalvation, deleted everything that is susceptible to not spend Update: sleepenabler VoodooHDA HDAE RTL 8xxx etc. … and any other kext that you have added. prefer mkext in E / E + HDD root DSDT if necessary, I went in 11.5 without any problem, think AppleFileSystemDriver.kext replace the kernel and repair permissions with Disk Utility.…

I'm only using a distro release by niresh. I dont know what are the other kext to be removed that might had caused my issues.

If anyone would be nice enough for me to take a look at this list of kext on my system and figure out which one is creating the conflict i would really be gratefull. I already spend more than 2 months with this hackintosh but still can't make it work perfectly and almost feel like giving my fx-6100 up. :'(

Also, i tried to install the distro you sent to me by iNDO but I can't make it boot. I'm stuck with "Not an intel platform. Restart fix not applied!"

Jhusly, i notice you have VoodooHDA, which is mentioned by Gilles.

But i would back up this Niresh installation and resort to something radically different: retail installation using either using MyHack or unibeast/multibeast. Of course, you would have to change the kernel in either one to RAW's, so it manages to boot.

Since you own a Bulldozer, you should be able to install Lion with ease. Niresh's is a distro from which a lot of issues are reported. Distros, in general, are very unreliable material. Maybe you solve all issues with a good retail installation.

Already tried removing several kext from there one by one which I think are irrelevant including voodooHDA as suggested by gils long before but I still end up the same.

I wanted to try to do a clean install using the retail version of LION but i cant find anything from the web not hosted in torrent sites. Torrents are terribly slow in my place. If theres only a non-torrent link I can find then I would just download it from the office where i enjoy 100mbps connection but also block torrent downloads.

@jhuslyAlready tried removing several kext from there one by one which I think are irrelevant including voodooHDA as suggested by gils long before but I still end up the same. I wanted to try to do a clean install using the retail version of LION but i cant find anything from the web not hosted in torrent sites. Torrents are terribly slow in…

hello ,

Why do you spend with crappy distro, look at my signature, you have a tutorial for a retail installation method, if you follow the diferent steps, your hachintosh AMD fonctionnerra perfectly.
You do not need to multimachin tonymachintruc or any other MyHack and install.
you need either a virtual machine on win7 (VTBX) or any distro as iATKOS S3 V2 to prepare your USB key.

google translation

loock !

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>EthernetBuiltIn</key>
	<string>Yes</string>
	<key>GraphicsEnabler</key>
	<string>Yes</string>
	<key>Kernel</key>
	<string>mach_kernel</string>
	<key>Kernel Flags</key>
	<string>busratio=165 cpu=2 npci=0x3000</string>
	<key>Theme</key>
	<string>Default</string>
</dict>
</plist>

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>SMbiosvendor</key>
	<string>AppleInc.</string>
	<key>SMbiosversion</key>
	<string>IM121.88Z.0047.B0A.1104221555</string>
	<key>SMboardproduct</key>
	<string>Mac-942B59F58194171B</string>
	<key>SMfamily</key>
	<string>iMac</string>
	<key>SMmanufacturer</key>
	<string>AppleInc.</string>
	<key>SMproductname</key>
	<string>iMac12,2</string>
	<key>SMserial</key>
	<string>C02GM1V9DHJP</string>
</dict>
</plist>

Extra
Extensions
FakeSMC.kext
NullCPUPowerManagement.kext
Extensions.mkext
modules
klibc.dylib
uClibcxx.dylib
org.chameleon.Boot.plist
smbios.plist
Themes
Blackosx_BIG
Default
mach_kernel

Accusys6xxxx.kext
acfs.kext
acfsctl.kext
ALF.kext
Apple_iSight.kext
Apple16X50Serial.kext
AppleACPIPlatform.kext
AppleAHCIPort.kext
AppleAPIC.kext
AppleAVBAudio.kext
AppleBacklight.kext
AppleBacklightExpert.kext
AppleBluetoothMultitouch.kext
AppleBMC.kext
AppleEFIRuntime.kext
AppleFileSystemDriver.kext
AppleFSCompressionTypeDataless.kext
AppleFSCompressionTypeZlib.kext
AppleFWAudio.kext
AppleGraphicsControl.kext
AppleGraphicsPowerManagement.kext
AppleHDA.kext
AppleHIDKeyboard.kext
AppleHIDMouse.kext
AppleHPET.kext
AppleHWSensor.kext
AppleIntelCPUPowerManagement.kext
AppleIntelCPUPowerManagementClient.kext
AppleIntelFramebufferCapri.kext
AppleIntelGMA950.kext
AppleIntelGMA950GA.plugin
AppleIntelGMA950GLDriver.bundle
AppleIntelGMA950VADriver.bundle
AppleIntelGMAX3100.kext
AppleIntelGMAX3100FB.kext
AppleIntelGMAX3100GA.plugin
AppleIntelGMAX3100GLDriver.bundle
AppleIntelGMAX3100VADriver.bundle
AppleIntelHD3000Graphics.kext
AppleIntelHD3000GraphicsGA.plugin
AppleIntelHD3000GraphicsGLDriver.bundle
AppleIntelHD3000GraphicsVADriver.bundle
AppleIntelHD4000Graphics.kext
AppleIntelHD4000GraphicsGA.plugin
AppleIntelHD4000GraphicsGLDriver.bundle
AppleIntelHD4000GraphicsVADriver.bundle
AppleIntelHDGraphics.kext
AppleIntelHDGraphicsFB.kext
AppleIntelHDGraphicsGA.plugin
AppleIntelHDGraphicsGLDriver.bundle
AppleIntelHDGraphicsVADriver.bundle
AppleIntelIntegratedFramebuffer.kext
AppleIntelIVBVA.bundle
AppleIntelSNBGraphicsFB.kext
AppleIntelSNBVA.bundle
AppleIRController.kext
AppleKeyStore.kext
AppleKeyswitch.kext
AppleLPC.kext
AppleLSIFusionMPT.kext
AppleMatch.kext
AppleMCCSControl.kext
AppleMCEDriver.kext
AppleMCP89RootPortPM.kext
AppleMIDIFWDriver.plugin
AppleMIDIIACDriver.plugin
AppleMIDIRTPDriver.plugin
AppleMIDIUSBDriver.plugin
AppleMikeyHIDDriver.kext
AppleMobileDevice.kext
AppleMultitouchDriver.kext
ApplePlatformEnabler.kext
AppleRAID.kext
AppleRAIDCard.kext
AppleRTC.kext
AppleSDXC.kext
AppleSEP.kext
AppleSmartBatteryManager.kext
AppleSMBIOS.kext
AppleSMBusController.kext
AppleSMBusPCI.kext
AppleSMC.kext
AppleSMCLMU.kext
AppleSRP.kext
AppleStorageDrivers.kext
AppleThunderboltDPAdapters.kext
AppleThunderboltEDMService.kext
AppleThunderboltNHI.kext
AppleThunderboltPCIAdapters.kext
AppleThunderboltUTDM.kext
AppleTyMCEDriver.kext
AppleUpstreamUserClient.kext
AppleUSBAudio.kext
AppleUSBDisplays.kext
AppleUSBEthernetHost.kext
AppleUSBMultitouch.kext
AppleUSBTopCase.kext
AppleVADriver.bundle
AppleWWANAutoEject.kext
AppleXsanFilter.kext
ATI1300Controller.kext
ATI1600Controller.kext
ATI1900Controller.kext
ATI2400Controller.kext
ATI2600Controller.kext
ATI3800Controller.kext
ATI4600Controller.kext
ATI4800Controller.kext
ATI5000Controller.kext
ATI6000Controller.kext
ATIFramebuffer.kext
ATIRadeonX1000.kext
ATIRadeonX1000GA.plugin
ATIRadeonX1000GLDriver.bundle
ATIRadeonX1000VADriver.bundle
ATIRadeonX2000.kext
ATIRadeonX2000GA.plugin
ATIRadeonX2000GLDriver.bundle
ATIRadeonX2000VADriver.bundle
ATIRadeonX3000.kext
ATIRadeonX3000GA.plugin
ATIRadeonX3000GLDriver.bundle
ATIRadeonX3000VADriver.bundle
ATISupport.kext
ATTOCelerityFC.kext
ATTOCelerityFC8.kext
ATTOExpressPCI4.kext
ATTOExpressSASHBA.kext
ATTOExpressSASHBA2.kext
ATTOExpressSASRAID.kext
ATTOExpressSASRAID2.kext
AudioAUUC.kext
AudioIPCDriver.kext
autofs.kext
BJUSBLoad.kext
BootCache.kext
CalDigitHDProDrv.kext
cd9660.kext
cddafs.kext
CellPhoneHelper.kext
CoreStorage.kext
Dont Steal Mac OS X.kext
DSACL.ppp
DSAuth.ppp
DVFamily.bundle
EAP-KRB.ppp
EAP-RSA.ppp
EAP-TLS.ppp
EPSONUSBPrintClass.kext
exfat.kext
GeForce.kext
GeForce7xxx.kext
GeForce7xxxGA.plugin
GeForce7xxxGLDriver.bundle
GeForce7xxxVADriver.bundle
GeForceGA.plugin
GeForceGLDriver.bundle
GeForceVADriver.bundle
HighPointIOP.kext
HighPointRR.kext
HighPointRR644.kext
IO80211Family.kext
IOACPIFamily.kext
IOAHCIFamily.kext
IOATAFamily.kext
IOAudio2Family.kext
IOAudioFamily.kext
IOAVBFamily.kext
IOBDStorageFamily.kext
IOBluetoothFamily.kext
IOBluetoothHIDDriver.kext
IOCDStorageFamily.kext
IODVDStorageFamily.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
IOFireWireSerialBusProtocolTransport.kext
IOGraphicsFamily.kext
IOHDIXController.kext
IOHIDFamily.kext
IONDRVSupport.kext
IONetworkingFamily.kext
IOPCIFamily.kext
IOPlatformPluginFamily.kext
IOSCSIArchitectureModelFamily.kext
IOSCSIParallelFamily.kext
IOSerialFamily.kext
IOSMBusFamily.kext
IOStorageFamily.kext
IOStreamFamily.kext
IOSurface.kext
IOThunderboltFamily.kext
IOTimeSyncFamily.kext
IOUSBAttachedSCSI.kext
IOUSBFamily.kext
IOUSBMassStorageClass.kext
IOUserEthernet.kext
IOVideoFamily.kext
iPodDriver.kext
JMicronATA.kext
L2TP.ppp
mcxalr.kext
msdosfs.kext
ntfs.kext
NVDAGF100Hal.kext
NVDAGK100Hal.kext
NVDANV40HalG7xxx.kext
NVDANV50Hal.kext
NVDAResman.kext
NVDAResmanG7xxx.kext
NVSMU.kext
OSvKernDSPLib.kext
PPP.kext
PPPoE.ppp
PPPSerial.ppp
PPTP.ppp
PromiseSTEX.kext
Quarantine.kext
Radius.ppp
RealtekRTL81xx.kext
RemoteVirtualInterface.kext
Sandbox.kext
SM56KUSBAudioFamily.kext
SMARTLib.plugin
smbfs.kext
SMCMotionSensor.kext
SoftRAID.kext
System.kext
TMSafetyNet.kext
triggers.kext
udf.kext
webcontentfilter.kext
webdav_fs.kext

c'est tout propre !

The harddrives that show up on the right side, are they only available on amd 10.7.4 and possibly 10.7.3? I don't get visible harddrives on my desktop with 10.7.2 or is their a kext or pkg file to fix that?

@GodofwarThe harddrives that show up on the right side, are they only available on amd 10.7.4 and possibly 10.7.3? I don't get visible harddrives on my desktop with 10.7.2 or is their a kext or pkg file to fix that?

euh ! ? c'est quoi la question au juste ?

@GodofwarThe harddrives that show up on the right side, are they only available on amd 10.7.4 and possibly 10.7.3? I don't get visible harddrives on my desktop with 10.7.2 or is their a kext or pkg file to fix that?

if this questions is about the HD drives found in the right side of my screencaps. All you have to do is, on finder, click preferences and then you can see options from there. Ticks all the display options for HDD and CD.

@gilshello , Why do you spend with crappy distro, look at my signature, you have a tutorial for a retail installation method, if you follow the diferent steps, your hachintosh AMD fonctionnerra perfectly. You do not need to multimachin tonymachintruc or any other MyHack and install. you need either a virtual machine on win7 (VTBX) or any…

Just found a non-torrent link for iATKOS L2 and downloaded it today in the office. I gotta give it a try when i get home. My problem installing using the retail version is that i dont have a Lion retail dmg file.

But thanks again, you've always been a big help to me!

@jhuslyJust found a non-torrent link for iATKOS L2 and downloaded it today in the office. I gotta give it a try when i get home. My problem installing using the retail version is that i dont have a Lion retail dmg file. But thanks again, you've always been a big help to me!

iATKOS L2 why ?

@gilsiATKOS L2 why ?

because that's the only one i found in the internet not hosted in torrent sites.

I've tried to install SL using iAtkos S3 V2. It installs but of course I get an instant reboot. I tried to install using OSX INDO 10.7.4. Towards the end of the installation I receive a Failed Install error. I AM able however to boot it up using these flags busratio=18 cpu=1 UsekernelCache=No npci=0x3000 PCIRootUID=1 GraphicsEnabler=Yes -f -v -x I can get into safe mode..but thats about all i can do..I can't install any kernels..kexts..etc. I will say I'm closer than I was a few months ago with this system.

ASUS Sabertooth 990FX Motherboard
AMD FX 8-Core Processor 3.60Ghz
16GB DDR3 RAM AMD Performance Edition
EVGA GeForce GTX 570
Geforce GT 240

@grahfexI've tried to install SL using iAtkos S3 V2. It installs but of course I get an instant reboot. I tried to install using OSX INDO 10.7.4. Towards the end of the installation I receive a Failed Install error. I AM able however to boot it up using these flags busratio=18 cpu=1 UsekernelCache=No npci=0x3000 PCIRootUID=1…

for your CG is GraphicsEnabler=No, it seems to me? and let one CG for the install. (GTX 570, for example)

@gilsfor your CG is GraphicsEnabler=No, it seems to me? and let one CG for the install. (GTX 570, for example)

Not quite sure I understand you..but I will try.

Basically what you are saying is just install SL with my GTX 570?
I can take the other card out...
If so I shall give that a try!

@grahfexNot quite sure I understand you..but I will try. Basically what you are saying is just install SL with my GTX 570? I can take the other card out... If so I shall give that a try!

http://wiki.osx86project.org/wiki/index.php/HCL_10.7.2#… ↗

I updated to 10.7.5 and now the screen stops updating after [ PCI Configuration begin ]. I found that it continues and if I boot to single user mode I can type 'halt' and the system halts. Any thoughts on where to start looking. Using a AMD FX-8120 on a ASUS M5A97 EVO with a Galaxy GTX 465.

Ok..I've tried yet again to install OS X 10.7.4 INDO.

Success! However..I am stuck at the same roadblock. I can boot into the system using

busratio=18 cpu=1 npci=0x3000 PCIRootUID=1 -v

any other combination of flags I can boot with too.. like UsekernelCache=No

anyway...when I'm actually in the system I can't for the life of me install ANYTHING! No kexts...packages..nothing! I have a hard drive to swap files between windows and OS X and half the time I can't even copy them over to my OS X drive.

I'm a lot closer to complete system than I was months ago but now I'm just plain stuck...any suggestions? I'm ALMOST there!

This is the permissions bug. Search at this topic for it, RAWX86 posted somewhere in the topic an updated kernel adressing precisely this issue.

Is this updated kernel different from the one on the first post?

@jeisomI updated to 10.7.5 and now the screen stops updating after [ PCI Configuration begin ]. I found that it continues and if I boot to single user mode I can type 'halt' and the system halts. Any thoughts on where to start looking. Using a AMD FX-8120 on a ASUS M5A97 EVO with a Galaxy GTX 465.

npci=0x3000 GraphicsEnabler=Yes

@grahfexOk..I've tried yet again to install OS X 10.7.4 INDO. Success! However..I am stuck at the same roadblock. I can boot into the system using busratio=18 cpu=1 npci=0x3000 PCIRootUID=1 -v any other combination of flags I can boot with too.. like UsekernelCache=No anyway...when I'm actually in the system I can't for the life of me install…

tu mélanges tes problèmes !

grahfex : what boot flags you used to be able to boot into the installation screen? I have a iNDO 10.7.4 release here but can't boot from it. It always says "Not an intel platform. Restart fix not applied!"

@gilsnpci=0x3000 GraphicsEnabler=Yes

Thanks. Already Tried both. No joy.

EDIT:
Tried again. This time it worked. Thanks

@R:A:W:X86Nope. First post is up to date - build 30 from 18 Jul is the latest and only recommended to be used.

effectivement , très bon boulot pour ton kernel , fonctionne également magistralement bien pour Lion 10.7.5 .

Do you guys think I need a different Kernel for my Mach Kernel? Sometimes command -legacy busratio=17 UsekernelCache=No npci=0x3000 PCIRootUID=0 Graphics Enabler=Yes does not work! I'm using Mach Kernel v4 with a Amd Phenom II x4 965 3.4ghz and gigabyte gtx 570 card with 4 gigs of ddr3 ram. Motherboard is Asus M4A79XTD EVO. That or maybe I need a different command. My Hackintosh Lion acts very strange. I have to shut my computer down like 3 times before the command finally works, why the heck would that be?

Godofwar, If you're still using Bronzovka's kernel, you should definitely replace it with R:A:W:X86's kernel from the first post on this page.

Also, you can put all those kernel flags in the <Kernel Flags> section of /Extra/org.chameleon.Boot.plist.

@instant idiotGodofwar, If you're still using Bronzovka's kernel, you should definitely replace it with R:A:W:X86's kernel from the first post on this page. Also, you can put all those kernel flags in the <Kernel Flags> section of /Extra/org.chameleon.Boot.plist.

I'm on 10.7.2, I do not want to update because I fear that my hackintosh won't work at all and I'm sick of reinstalling Snow Leopard and setting Lion up all over again. I've done that hundreds of time already. Does R:A:W:X86's work with 10.7.2 or no?

Also, I accidently posted on this topic.

Oh yeah, can I replace that kernel while I'm on Hackintosh Lion Or do I have to replace it while I'm on my Windows 7 side? And if I have to do it on my Windows 7 side, what program to you recommend I use so I can read/write to my Mac side?

You can simply rename the RAWX86's kernel to, say, RAW, before putting it at the root of your Lion system. Doing that, you won't need to replace the older one (that's named mach_kernel) and will be able to use it if the things go wrong and RAWX86's kernel doesn't work with your current 10.7.2 installation.

If you do as i advised, just remember to boot using the name you gave to the kernel as a boot flag. If you call it RAW, just type RAW and, just for safety, npci=0x3000 and hit enter. If you want to boot with your older kernel, just doesn't type anything.

@The ConnacticYou can simply rename the RAWX86's kernel to, say, RAW, before putting it at the root of your Lion system. Doing that, you won't need to replace the older one (that's named mach_kernel) and will be able to use it if the things go wrong and RAWX86's kernel doesn't work with your current 10.7.2 installation. If you do as i advised, just…

if i rename rawx custom kernel to like jhusly, in chameleon boot should i type "-jhusly" or just "jhusly". I have a 10.7.3 installation and tried updating to either 10.7.4 /10.7.5 this time I've gotten a little further than the previous which just restart after the chameleon load some kext. But either way I'm still stuck with "Still waiting for root device." I use RAWX custom kernel on both update and the mach_kernel which works on the 10.7.3. Anyway, I use MacDrive in windows to replace the kernel.

@The Connacticjust "jhusly" (without the quotes, of course).

okay thanks! but how about the "Still waiting for root device", any idea? Tried booting with "npci=0x3000", single user, safemode, legacy but still im stuck on that part.

EDIT : nvm, i'm already able to boot after 10.7.4 update with RAWX custom kernel. Weird because im using bulldozer but instead of 64bit support only, mine is 32bit userland only. I'll try the fix and hope it will be fixed this time!

wohow! Couldn't get any happier than this! Finally after few months, already perfected my lion with 10.7.4 update and 32/64bit support!

thanks RAWX86 for the kernel and gils :

Is there any reason I should update from 10.7.3 to 10.7.4 or no reason and should I just be happy to run 10.7.3 as is? Is 10.7.4 too complicating? I just updated to 10.7.2 to 10.7.3 successfully today. I replaced the finder and machkernel than it worked. But than I had to install official Nvidia drivers which actually worked better than the Nvidia kexts I was using on 10.7.2.

Now i'm satisfied!

@GodofwarIs there any reason I should update from 10.7.3 to 10.7.4 or no reason and should I just be happy to run 10.7.3 as is? Is 10.7.4 too complicating? I just updated to 10.7.2 to 10.7.3 successfully today. I replaced the finder and machkernel than it worked. But than I had to install official Nvidia drivers which actually worked better…

There's not much to gain from 10.7.3 to 10.7.4 except that it now support the latest xcode and maybe some later apps and those stated by apple in the update but if 32/64bit works perfectly fine and all your application then it doesn't really matter much specially if your previous update is real bloody.

What you did from 10.7.2 to 10.7.3 should be almost the same if not exactly.

@jhuslyNow i'm satisfied! There's not much to gain from 10.7.3 to 10.7.4 except that it now support the latest xcode and maybe some later apps and those stated by apple in the update but if 32/64bit works perfectly fine and all your application then it doesn't really matter much specially if your previous update is real bloody. What you did…

10.7.3 seems to run better in flash with official Nvidia drivers. I was using 10.7.2 nvidia kexts to get my gtx 570 to work on 10.7.2 and I had flash freezes at the beginning of most youtube videos. Flash acted weird on 10.7.2 with Nvidia kexts. I believe the official Nvidia drivers worked a lot better. So thumbs up to Apple for not being douches and putting stuff in their official drivers to make it not work right with hackintosh. Tho, some people claim they've had crashes on the official drivers and freezes I have no experienced either one but I've read comments online saying that 570 gtx an 580 gtx works perfectly with official Nvidia drivers. So maybe its certain graphics cards?

That might be the case. Mine, i have xfx hd5770 which is mac osx friendly with the earlier versions unfortunately Lion make it useless if not flashed. So this time i would be getting another card for my hackintosh enough for some editing, i believe xcode dont need much of it.

Anyway to get all 4 or 5 of my speakers to work with Hackintosh Lion 10.7.3 with my Creative X-fi Soundcard? Or am I stuck with 2.1 sound from only 2 speakers? I'm using Voodoo hda the lastest version I believe. Oh yeah, I'm currently using Leopard as my Wallpaper even tho I'm on Lion. I just thought Lion had the ugliest Wallpaper I've ever seen. I think Leopard and Snow Leopard had better looking Wallpaper that gives Hackintosh a better feel for me personally.

Edit: I probably should have posted this on the other topic now that I think about it but it seems like more people are responding to this topic for some reason... Maybe people are sick of the zillion questions I have, or just coincidence.

@jhusly^ where's your soundcard installed? USB or PCI?

I don't know, I would think PCI but it could be USB.

Creative Sound Blaster X-Fi Titanium Fatal1ty Professional is my exact sound card, I have a black, light green, and orang plugs plugged into my sound card.

how could you miss that? Were you not the one who installed it in your system?

X-Fi Titanium ↗
Base on that post, your audio seems not to support 5.1 natively. I havent really read the whole part of it…

@jhuslyhow could you miss that? Were you not the one who installed it in your system? X-Fi Titanium (http://www.insanelymac.com/forum/topic/205606-confirmed… ↗) Base on that post, your audio seems not to support 5.1 natively. I havent really read the whole part of it…

My soundcard supports 7.1, 5.1, and 2.1 sound. I have the drivers installed and setup for 5.1 on my Windows 7 side and sound comes through all 5 speakers. I never heard of any sound card only supporting one of the surrounds, most sound cards I know support all 3 which this one does atleast on my Windows 7 side. I also didn't set up the card myself, I don't setup any parts in my computer.

opsss, sorry. What i mean is that lion hackintosh does not support it natively as per that page i've posted.

anybody here having a perfectly working appstore / itunes store and were you able to achieve it?

@jhuslyanybody here having a perfectly working appstore / itunes store and were you able to achieve it?

I haven't, doesn't really bother me because I probably wouldn't use them anyways. There's music players you can find online to replace ITUNEs if you wanted music player. I personally use Enqueue. I'm not a big music listener on the computer tho, I usually play my mp3s on my Creative Zen(an mp3 player you probably never heard of). I only use music when I jog/exercise. My brother uses his computer as a music player tho, using Windows Itunes all the time. Enqueue is a good Itunes replacement it looks almost exactly like Itunes.

I´ve got a perfectly running appstore/itunes with 10.7.4 . Bought many apps and so on.

@GodofwarI haven't, doesn't really bother me because I probably wouldn't use them anyways. There's music players you can find online to replace ITUNEs if you wanted music player. I personally use Enqueue. I'm not a big music listener on the computer tho, I usually play my mp3s on my Creative Zen(an mp3 player you probably never heard of). I…

iTunes sound a lot better for me so far since i havent got any other player installed other than vlc and the other video player plus I'm able to use the itunes controller so i could play/skip a song right into my taskbar. Also, Im just using my music collection in my ntfs/windows drive and completely sync it without copying into my mac drive. But my main concern is to be able to use the store.

@misterfristaI´ve got a perfectly running appstore/itunes with 10.7.4 . Bought many apps and so on.

How were you able to do it? Mind sharing some tips? I tried what i had seen on the net like booting with PCIRootUID=0 or deleting all your network settings and add the ethernet first on the list but that just dont seem to work with me. My connection is mainly by using a 3g/4g stick connected via usb and or wifi and not via lan cable.

CPU: Phenom II x2 550BE
MOBO: MSI 790FX-GD80
MEM: 8GB 1333mhz

I having Snow Leopard 10.6.8 and 64bits working very good.

Now having Lion 10.7.2 very buggy and update combo to
10.7.4 crash finder, crash graphics card and network.

Having reinstall graphics card and network now working
only have problem network say unplugged cable :S:S having reboot to snow leopard say good cable network huh.

and i think problem that

And i hope dat you me help and thanks where now can i not internet :S unplugged cable say.

Lion 10.7.4 having work all sure Soud Work and Graphics Work
only network working driver yes only unplugged cable?

no tested 64bits having first internet thant can i downlaod amd ans patcher

is 107.4 stable? of beta testen? and 10.7.3 stable?

I know Snow Leopard is very stable

If you have Snow Leopard working properly, there's no need to update unless you're like me and had to update because you have a graphics card not supported on Snow Leopard. Or maybe you want some of the software that only Lion supports? I don't know... Lion and Snow Leopard look almost exactly the same to me, only difference I notice is that it has Launchpad and other pointless new features.

If I understand you have against me. I like to do mac try with Snow Leopard works 100 percent even super video card after I had installed lion 10.7.2 latest video card works with kext and after 10.7.4 combo update wast that video card kext does not work anymore! but now has provisionally been resolved fix video card and network. but at the time now I have not networking internet where ever said cable is not connected say hello to snow leopard did web and does not lion but were working perfectly 10.7.2 to 10.7.4 update that became renowned as some problems kext vidoekaart and network card but has not been solved except network kext

setuped today retail 10.7.3
and updating now to to 10.7.5

---------

is there any development or any release for 11.5 kernel ?

@$The-King$setuped today retail 10.7.3 and updating now to to 10.7.5 --------- is there any development or any release for 11.5 kernel ?

Pas besoin de kernel 11.5 , car celui 11.4 de rawx86 supporte très bien la version 10.7.5 .

pour les phenom boot en -legacy .

@ gils : wow! that's really a good news! i havent tried that update yet since im happy right now with my 10.7.4 update and everything still seems supported.

@gilsPas besoin de kernel 11.5 , car celui 11.4 de rawx86 supporte très bien la version 10.7.5 . pour les phenom boot en -legacy .

I already updated to 10.7.5 using 11.4 kernel
but will be more better to use 11.5 kernel

@$The-King$I already updated to 10.7.5 using 11.4 kernel but will be more better to use 11.5 kernel

le mieux que tu ais à faire c'est de te prendre un FX 4100 et tu n'auras plus aucun problème .

@gilsle mieux que tu ais à faire c'est de te prendre un FX 4100 et tu n'auras plus aucun problème .

upgrade is on list
but to next generation

fseventsd-uuid will not remove from my trash bin under 10.7.4. I just updated to 10.7.4 from 10.7.3... I tried using the program Trash it! and it will not delete it.

Also, each time I update my Mac version I have to download newer Nvidia drivers, is that normal? I went from Retail 270.00.00f01.dmg from 10.7.3 drivers to Retail 270.00.00f06.dmg

I fixed my problem, I just repaired Windows on my Mac side now its out of my trash-bin! Still can't get my computer to self boot properly.

-legacy UsekernelCache=No npci=0x3000 PCIRootUID=0 is the command I use, I don't know if that is the proper command tho. Also, for some reason if I type UseKernelCache=No it won't boot because I think it wants the k lower cased on kernel for whatever reason that is...

@GodofwarI fixed my problem, I just repaired Windows on my Mac side now its out of my trash-bin! Still can't get my computer to self boot properly. -legacy UsekernelCache=No npci=0x3000 PCIRootUID=0 is the command I use, I don't know if that is the proper command tho. Also, for some reason if I type UseKernelCache=No it won't boot because I…

et si tu faisait -legacy UsekernelCache=No PCIRootUID=1 npci=0x3000 GraphicsEnabler=Yes -v -f

I just got a weird Kernel Panic possibly from using Google Chrome or maybe running too many applications at once?

A message popped up on my screen cursing at me saying Kernel Panic there's no ----ing support for AMD. I doubt that was from Apple unless Apple is upset that people are hackintoshing and cursing at them? Or is that from Hackers who created Hackintosh? Either way it was quite childish message no matter who wrote that Panic. Why do people always have to use the f-bomb now a days?

It could have been Utorrent related aswell, I had a torrent file open and I didn't download anything on it because I was looking at the files I wanted to download.

Running Hackintosh Lion on Amd Phenom II x4 965 3.4ghz with a Nvidia Gigabyte GTX 570 on 10.7.4 Lion but I'm having a problem making my Hackintosh Lion self-boot properly. This is my command. Was wondering if you had any clue to get it to work or do you not mess with Amd at all so you don't know? Thanks

<plist version="1.0">
<dict>
<key>Boot Graphics</key>
<string>Yes</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>-legacy npci=0x3000</string>
<key>Quiet Boot</key>
<string>No</string>
<key>Timeout</key>
<string>5</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>PCIRootUID</key>
<string>0</string>
<key>UseKernelCache</key>
<string>No</string>
</dict>
</plist>

Weird thing is that to get my Hackintosh to boot up I have to either type stuff like -legacy UsekernelCache=No PCIRootUID=0 to get it to boot up sometimes. Also, sometimes when I do boot my Hackintosh Lion up it doesn't always load Voodoo Audio Drivers properly and sometimes when I try to watch Youtube videos with no sound since Voodoo isn't loading up properly the flash video struggles to play video. Do you know whats going on?

http://www.youtube.com/watch?v=fW-4thbEiL0&feature=… ↗

Got that stupid Kernel Panic again... Weird, I wonder what is causing it. Do you think its any the apps I'm using, is it Google Chrome? What is it?

Doing a test, I'm sticking with Safari and I removed Google Chrome out of my Dock. I'll be using Safari for the next week or so. I'll let you know if I get Kernel Panics. I still have to find a way to get my Hackintosh to self-boot tho. I'm using the key commands -legacy UsekernelCache=No PCIRootUID=0 now and its booting that way. But I really don't think I should have to keep typing a boot command to load an operating system.

Edit: I can already tell that it was Google Chrome causing that dumb Kernel Panic. This blows, I guess I have to get used to Apple's browser since it works the best with their mac operating system. I say I'm about 80 percent sure it was Google Chrome causing the Kernel Panic. I'll be back in a week or so to let you know if it was. Right now I have a lot of of different Safari tabs and 5 different windows open and so far no Kernel Panic.

@GodofwarDoing a test, I'm sticking with Safari and I removed Google Chrome out of my Dock. I'll be using Safari for the next week or so. I'll let you know if I get Kernel Panics. I still have to find a way to get my Hackintosh to self-boot tho. I'm using the key commands -legacy UsekernelCache=No PCIRootUID=0 now and its booting that way. But…

you don't need to suffer mate install any of the supported bootloaders as of Chameleon and put these flags in the boot.Chameleon plist . you won't need to type it each time ... see it's easy as pee !

@diedoyou don't need to suffer mate install any of the supported bootloaders as of Chameleon and put these flags in the boot.Chameleon plist . you won't need to type it each time ... see it's easy as pee !

Aren't I already using a supported Chameleon? Or is their a specific Chameleon boot loader I need to work properly with 10.7.4?

The kernel flags section of org.chameleon.Boot.plist is exactly the same as what you type into chameleon at startup: try adding your flags there.

Is it normal to run into Kernel Panics with Google Chrome or you guys don't use that Browser so you wouldn't know? Thanks, ii, I'll try that.

I have never used Google Chrome on OS X, so I'm not much help there. I use Firefox on all platforms.

@instant idiotI have never used Google Chrome on OS X, so I'm not much help there. I use Firefox on all platforms.

Thanks for your help, but I still cannot make my Hackintosh Lion Amd self boot. I have no idea what my Chameleon Pbootlist wants from me, I do not know what command it wants from me to make it self boot. This is what it looks like right now.

<plist version="1.0">
<dict>
<key>Boot Graphics</key>
<string>Yes</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>-legacy npci=0x3000</string>
<key>Quiet Boot</key>
<string>No</string>
<key>Timeout</key>
<string>5</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>PCIRootUID</key>
<string>0</string>
<key>UseKernelCache</key>
<string>No</string>
</dict>
</plist>

Thanks, but it still acts dumb. I still have to shut my computer off once before it boots up properly the 2nd time I boot it up... What a weird way to boot up an Operating System... Maybe the command -legacy UseKernelCache=No PCIRootUID=0 npci=0x3000 isn't the right command for my Amd Phenom II x4 965 3.4ghz with a gtx 570... I'm totally stumped..

Try the kernel flag -f. My laptop running vanilla Lion won't boot without it, so I just thought...

@instant idiotTry the kernel flag -f. My laptop running vanilla Lion won't boot without it, so I just thought...

<key>Kernel Flags</key>
<string>-legacy UseKernelCache=No PCIRootUID=0 npci=0x3000 -f</string>

Is that where I put the f or should I put the -f at a different spot? Should I be using npci=0x3000 or npci=0x2000? Or would that not be causing any problems if I was using the wrong npci?

If your npci value is incorrect, then at boot time it'll hang at [PCI Configuration Begin]. Some motherboards don't need it at all, as far as I know. If you want -f to be permanent, then yes, that's the right place to put it; however, I thought you might want to try typing -f at boot time just to see if it makes a difference.

@instant idiotIf your npci value is incorrect, then at boot time it'll hang at [PCI Configuration Begin]. Some motherboards don't need it at all, as far as I know. If you want -f to be permanent, then yes, that's the right place to put it; however, I thought you might want to try typing -f at boot time just to see if it makes a difference.

I can't fit the -f at boot time. It stops typing when I type all this in -legacy UseKernelCache=No PCIRootUID=0 npci=0x3000. If I cut out the PCIRootUID=0 or npci=0x3000 I might be able too but that would cause a problem would it not?

@instant idiotIf your npci value is incorrect, then at boot time it'll hang at [PCI Configuration Begin]. Some motherboards don't need it at all, as far as I know. If you want -f to be permanent, then yes, that's the right place to put it; however, I thought you might want to try typing -f at boot time just to see if it makes a difference.

Oh yeah, also do you know of a safe tool to clean my browser cache without hurting Hackintosh Lion? I've noticed that my Safari Browser is loading webpages slowly lately and I don't think it's my connection but maybe something linked to the browser? Thanks

@instant idiotIf your npci value is incorrect, then at boot time it'll hang at [PCI Configuration Begin]. Some motherboards don't need it at all, as far as I know. If you want -f to be permanent, then yes, that's the right place to put it; however, I thought you might want to try typing -f at boot time just to see if it makes a difference.

I think -f is working, but I notice I still get Kernel Panics every so often in 10.7.4 Amd Hackintosh Lion. I thought this was linked to Google Chrome but I must be wrong. Could it be that these browsers are 64 bit browsers and that is what is causing the crash? I got a Kernel Panic when I started up with -f but it was boot the os... So I don't know, maybe -f is causing Panics? I don't think it was, I think it's just confidence, if anything it is because my browsers might be 64 bit on Lion but I need 32 bit Browsers?

Thanks, but that -f didn't fix anything. It still refuses to self-boot, this is quite frustrating that the most annoying part about Hackintosh for me is to get it to self-boot. :'(

@GodofwarThanks, but that -f didn't fix anything. It still refuses to self-boot, this is quite frustrating that the most annoying part about Hackintosh for me is to get it to self-boot. :'(

Salut,

pourquoi tu ne listes pas ton matériel dans ta signature ?

se sera plus simple pour te dépanner .

http://www.insanelymac.com/forum/topic/278181-amd-1073-… ↗

Can I do Method 1 - Easy on an Amd Hackintosh or must it be Intel Hackintosh? If so then it's basically the same as Method 2 right?

Basically I want to do Method 2 with Retail 10.7.3 DMG, but am wondering if Method 2 works with an Amd Hackintosh and not an Intel Hackintosh. Method 2 with IATKOS 2 is what I did before and you're telling me that IATKOS L2 is not good for my specs?

@Godofwarhttp://www.insanelymac.com/forum/topic/278181-amd-1073-… ↗ Can I do Method 1 - Easy on an Amd Hackintosh or must it be Intel Hackintosh? If so then it's basically the same as Method 2 right? Basically I want to do Method 2 with Retail 10.7.3 DMG, but am wondering if Method 2 works with an Amd Hackintosh and not an…

euh!? yes and no, the method with iATKOS L2 implies a valid SL 10.6 and remplacemment kernel after installation.
But installing Lion 10.7 retail FX processor involves a PC or Intel.

But my message did not mention it, it would be nice if you décrives your equipment in your signature for more visibilty for members of the forum so that we can help you more easily.

@gilseuh!? yes and no, the method with iATKOS L2 implies a valid SL 10.6 and remplacemment kernel after installation. But installing Lion 10.7 retail FX processor involves a PC or Intel. But my message did not mention it, it would be nice if you décrives your equipment in your signature for more visibilty for members of the forum so that…

Amd Phenom II x4 965 3.4ghz
4 gigs of ddr3 ram
Nvidia GigaByte GTX 570
Motherboard: Asus M4A79XTD EVO
Soundcard: Creative X-FI

I download the retail dmg file of 10.7.3, it was about 3.7gigs in size. Please tell me I got the right version/size! Also, can I do the method 2 or no? Do I have to do a much more complicating method. I find that method 2 is very easy to do.

Can you please clarify what you're actually trying to do now?

@instant idiotCan you please clarify what you're actually trying to do now?

I want to use Retail 10.7.3 with Method 2 instead of IATKOS 2 with Method 2. Will that work or you're not sure? gils speaks a different language be he/her is saying that I need to use retail dmg and not ITAKOS 2 dmg. But I don't know if this method will work for me since I do Method 2 because Method 2 seems the easiest for me since I know how to do Method 2 installation of Lion.

Edit: http://www.insanelymac.com/forum/topic/278181-amd-1073-… ↗

@GodofwarI want to use Retail 10.7.3 with Method 2 instead of IATKOS 2 with Method 2. Will that work or you're not sure? gils speaks a different language be he/her is saying that I need to use retail dmg and not ITAKOS 2 dmg. But I don't know if this method will work for me since I do Method 2 because Method 2 seems the easiest for me since I…

yep !

la méthode retail est réservé aux processeurs AMD FX et intel . (ssse)

@gilsyep ! la méthode retail est réservé aux processeurs AMD FX et intel . (ssse)

Not yep, I can confirm Retail 10.7.3 dmg does not work with Method 2. Method 2 will only work with IATKOS L2 and I replace the kernel, machkernel, and I install Chameleon on it. But problem will always be that it takes several times for me to shut my pc off and turn it back on to get it to boot properly. I am thinking I have wrong key command because I think I am installing it the proper way. I think Amd Phenom II x4 965 3.4ghz is suppose to be done with Method 2...

@GodofwarNot yep, I can confirm Retail 10.7.3 dmg does not work with Method 2. Method 2 will only work with IATKOS L2 and I replace the kernel, machkernel, and I install Chameleon on it. But problem will always be that it takes several times for me to shut my pc off and turn it back on to get it to boot properly. I am thinking I have wrong key…

yes yep !

le mieux que tu es à faire est de t'acheter un FX 6100 ou 6300 ou autre FX ! tu règleras tes problèmes de carte graphique , de problème de crash appli et de la gestion du mode 64 bit .

tu gagneras le choix des modes d'installation .

I just reinstalled Lion but now my Chameleon boot list is locked and I can't type at all in it. How do I unlock it? Thanks...

@GodofwarI just reinstalled Lion but now my Chameleon boot list is locked and I can't type at all in it. How do I unlock it? Thanks...

how it locked? before F8 to stop.

tu glisses ton plist sur le bureau et ensuite tu l'édites .

@gilstu glisses ton plist sur le bureau et ensuite tu l'édites .

Thanks, I had my friend translate what you said and now I understood. ^_^

I moved it to my desktop then I changed permissions to read and write! :-*

@GodofwarThanks, I had my friend translate what you said and now I understood. ^_^ I moved it to my desktop then I changed permissions to read and write! :-*

hello!

good news!

Bad News! It still takes me to shut my computer off the wrong way for my Hackintosh Lion to boot!

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Boot Graphics</key>
	<string>Yes</string>
	<key>EthernetBuiltIn</key>
	<string>Yes</string>
	<key>GraphicsEnabler</key>
	<string>Yes</string>
	<key>Kernel</key>
	<string>mach_kernel</string>
	<key>Kernel Flags</key>
	<string>-legacy UseKernelCache=No npci=0x3000 PCIRootUID=0</string>
	<key>Quiet Boot</key>
	<string>No</string>
	<key>Timeout</key>
	<string>5</string>
	<key>npci</key>
	<string>0x2000</string>
</dict>
</plist>

Also, why does this Error Message keep popping up in this flash chatroom?

I read through as many posts as I could and tried a wide variety of different things to fix this problem but, I can't seem to get a large portion of apps to work (not sure if 64bit apps don't work or if 32bit apps don't' work). Cinebench says I'm on 64bit, Finder works. System information says I'm on 32bit. Kext Utility says I'm using i386.

This is my build...

CPU: AMD FX-8120
Mobo : Asus Sabertooth 990fx
Graphics Card: Nvidia GeForce GT 240
RAM : 8gb of DDR3

My boot flags are :

<plist version="1.0">
<dict>
	<key>Kernel</key>
	<string>legacy_kernel</string>
	<key>Kernel Flags</key>
	<string>-v -f cpus=8 busratio=18 npci=0x3000 PCIRootUID=1 UseKernelCache=No EthernetBuiltIn=Yes GraphicsEnabler=Yes</string>
	<key>Timeout</key>
	<string>3</string>
</dict>
</plist>

I have to use cpus=8 otherwise it only uses the number of cores thats I say (cpus=1 only uses 1 core | 1 thread; cpus=2 uses 2 core | 2 thread)

Internet works. Everything that works is stable. I tried to use the AMD insn patcher, which didn't work. So I tried to see if they would work if I used maxmem=4096. Which is what I'm currently booted with right now, and they still don't work. Here is a paste of the crash.

paste bin.com/TxHFzHHT

I'd appreciate any help I can get. I'm really confused as to what I need to do. When I watch the systems logs I see there are a lot of things crashing in the background so I don't understand how it seems like things are stable. Here is a small snipped of the crashes seen in the console.

Nov 12 22:20:18 Alexs-iMac com.apple.launchd[1] (com.apple.qtkitserver[13715]): Job appears to have crashed: Illegal instruction: 4
Nov 12 22:20:18 Alexs-iMac com.apple.launchd[1] (com.apple.qtkitserver): Throttling respawn: Will start in 10 seconds
Nov 12 22:20:18 Alexs-iMac ReportCrash[13716]: Saved crash report for com.apple.qtkitserver[13715] version 1.0 (1) to /Users/Alex/Library/Logs/DiagnosticReports/com.apple.qtkitserver_2012-11-12-222018_Alexs-iMac.crash
Nov 12 22:20:18 Alexs-iMac ReportCrash[13716]: Removing excessive log: file://localhost/Users/Alex/Library/Logs/DiagnosticReports/com.apple.qtkitserver_2012-11-12-215248_Alexs-iMac.crash
Nov 12 22:20:24 Alexs-iMac com.apple.launchd.peruser.89[190] (com.apple.mdworker.i386.0[13717]): Job appears to have crashed: Illegal instruction: 4
Nov 12 22:20:24 Alexs-iMac com.apple.launchd.peruser.89[190] (com.apple.mdworker.i386.0): Throttling respawn: Will start in 10 seconds
Nov 12 22:20:24 Alexs-iMac ReportCrash[13706]: Saved crash report for mdworker32[13717] version ??? (???) to /Library/Logs/DiagnosticReports/mdworker32_2012-11-12-222024_localhost.crash
Nov 12 22:20:24 Alexs-iMac ReportCrash[13706]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/mdworker32_2012-11-12-221655_localhost.crash
Nov 12 22:20:29 Alexs-iMac com.apple.launchd[1] (com.apple.qtkitserver[13718]): Job appears to have crashed: Illegal instruction: 4
Nov 12 22:20:29 Alexs-iMac com.apple.launchd[1] (com.apple.qtkitserver): Throttling respawn: Will start in 10 seconds
Nov 12 22:20:29 Alexs-iMac ReportCrash[13716]: Saved crash report for com.apple.qtkitserver[13718] version 1.0 (1) to /Users/Alex/Library/Logs/DiagnosticReports/com.apple.qtkitserver_2012-11-12-222029_Alexs-iMac.crash
Nov 12 22:20:29 Alexs-iMac ReportCrash[13716]: Removing excessive log: file://localhost/Users/Alex/Library/Logs/DiagnosticReports/com.apple.qtkitserver_2012-11-12-215258_Alexs-iMac.crash
Nov 12 22:20:34 Alexs-iMac ReportCrash[13720]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
Nov 12 22:20:34 Alexs-iMac com.apple.launchd.peruser.89[190] (com.apple.mdworker.i386.0[13719]): Job appears to have crashed: Illegal instruction: 4
Nov 12 22:20:34 Alexs-iMac com.apple.launchd.peruser.89[190] (com.apple.mdworker.i386.0): Throttling respawn: Will start in 10 seconds
Nov 12 22:20:34 Alexs-iMac ReportCrash[13720]: Saved crash report for mdworker32[13719] version ??? (???) to /Library/Logs/DiagnosticReports/mdworker32_2012-11-12-222034_localhost.crash
Nov 12 22:20:34 Alexs-iMac ReportCrash[13720]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/mdworker32_2012-11-12-221706_localhost.crash
Nov 12 22:20:39 Alexs-iMac com.apple.launchd[1] (com.apple.qtkitserver[13723]): Job appears to have crashed: Illegal instruction: 4
Nov 12 22:20:39 Alexs-iMac com.apple.launchd[1] (com.apple.qtkitserver): Throttling respawn: Will start in 10 seconds
Nov 12 22:20:39 Alexs-iMac ReportCrash[13716]: Saved crash report for com.apple.qtkitserver[13723] version 1.0 (1) to /Users/Alex/Library/Logs/DiagnosticReports/com.apple.qtkitserver_2012-11-12-222039_Alexs-iMac.crash
Nov 12 22:20:39 Alexs-iMac ReportCrash[13716]: Removing excessive log: file://localhost/Users/Alex/Library/Logs/DiagnosticReports/com.apple.qtkitserver_2012-11-12-221706_Alexs-iMac.crash
Nov 12 22:20:45 Alexs-iMac com.apple.launchd.peruser.89[190] (com.apple.mdworker.i386.0[13724]): Job appears to have crashed: Illegal instruction: 4
Nov 12 22:20:45 Alexs-iMac com.apple.launchd.peruser.89[190] (com.apple.mdworker.i386.0): Throttling respawn: Will start in 10 seconds
Nov 12 22:20:45 Alexs-iMac ReportCrash[13720]: Saved crash report for mdworker32[13724] version ??? (???) to /Library/Logs/DiagnosticReports/mdworker32_2012-11-12-222045_localhost.crash
Nov 12 22:20:45 Alexs-iMac ReportCrash[13720]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/mdworker32_2012-11-12-221716_localhost.crash
N

I just rebooted and here is a paste of my most recent kernel log.

Nov 12 22:23:47 localhost kernel[0]: npvhash=4095
Nov 12 22:23:47 localhost kernel[0]: PAE enabled
Nov 12 22:23:47 localhost kernel[0]: 64 bit mode enabled
Nov 12 22:23:47 localhost kernel[0]: rtclock_init: Taking bus ratio path 0 (Boot-time argument)
Nov 12 22:23:47 localhost kernel[0]: TSC: Reported FSB:    0.0000MHz, corrected FSB:  172.806046MHz
Nov 12 22:23:47 localhost kernel[0]: TSC: Verification of clock speed failed. Fallback correction was performed. Please upgrade bootloader.
Nov 12 22:23:47 localhost kernel[0]: TSC: Frequency =   3110.508828MHz, FSB frequency =  172.806046MHz, bus ratio = 18
Nov 12 22:23:47 localhost kernel[0]: Darwin Kernel Version 11.4.0: Mi 18 Jul 2012 02:24:10 CEST; bronzovkAnVoodoo v0.9.30:xnu-1699.26.8/BUILD/obj/RELEASE_I386
Nov 12 22:23:47 localhost kernel[0]: vm_page_bootstrap: 2031706 free pages and 49062 wired pages
Nov 12 22:23:47 localhost kernel[0]: zone leak detection enabled
Nov 12 22:23:47 localhost kernel[0]: standard timeslicing quantum is 10000 us
Nov 12 22:23:47 localhost kernel[0]: mig_table_max_displ = 73
Nov 12 22:23:47 localhost kernel[0]: warning: skipping personalities in blacklisted kext com.apple.driver.AppleIntelCPUPowerManagement
Nov 12 22:23:47 localhost kernel[0]: NullCPUPowerManagement::init: properties=0xbcdae40
Nov 12 22:23:47 localhost kernel[0]: NullCPUPowerManagement::start
Nov 12 22:23:47 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=16 Enabled
Nov 12 22:23:47 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=17 Enabled
Nov 12 22:23:47 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=18 Enabled
Nov 12 22:23:47 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=19 Enabled
Nov 12 22:23:47 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=20 Enabled
Nov 12 22:23:47 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=21 Enabled
Nov 12 22:23:47 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=22 Enabled
Nov 12 22:23:47 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=23 Enabled
Nov 12 22:23:47 localhost kernel[0]: calling mpo_policy_init for Sandbox
Nov 12 22:23:47 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Nov 12 22:23:47 localhost kernel[0]: calling mpo_policy_init for Quarantine
Nov 12 22:23:47 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Nov 12 22:23:47 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Nov 12 22:23:47 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Nov 12 22:23:47 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Nov 12 22:23:47 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Nov 12 22:23:47 localhost kernel[0]: MAC Framework successfully initialized
Nov 12 22:23:47 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Nov 12 22:23:47 localhost kernel[0]: Kext org.hwsensors.driver.CPUSensors - library kext org.netkas.driver.FakeSMC not found.
Nov 12 22:23:47 localhost kernel[0]: Can't load kext org.hwsensors.driver.CPUSensors - failed to resolve library dependencies.
Nov 12 22:23:47 localhost kernel[0]: Kext org.hwsensors.driver.CPUSensors failed to load (0xdc00800e).
Nov 12 22:23:47 localhost kernel[0]: Failed to load kext org.hwsensors.driver.CPUSensors (error 0xdc00800e).
Nov 12 22:23:47 localhost kernel[0]: Couldn't alloc class "CPUSensors"
Nov 12 22:23:47 localhost kernel[0]: IOAPIC: Version 0x21 Vectors 64:87
Nov 12 22:23:47 localhost kernel[0]: IOAPIC: Version 0x21 Vectors 88:119
Nov 12 22:23:47 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Nov 12 22:23:47 localhost kernel[0]: PFM64 (44 cpu) 0xfff10000000, 0xf0000000
Nov 12 22:23:47 localhost kernel[0]: [ PCI configuration begin ]
Nov 12 22:23:47 localhost kernel[0]: [ PCI configuration end, bridges 9 devices 27 ]
Nov 12 22:23:47 localhost kernel[0]: RTC: Only single RAM bank (128 bytes)
Nov 12 22:23:47 localhost kernel[0]: RTC: lost battery power - time may be invalid
Nov 12 22:23:47 localhost kernel[0]: HPET: probeHPET() failed
Nov 12 22:23:47 localhost kernel[0]: Kext org.hwsensors.driver.MotherboardSensors - library kext org.netkas.driver.FakeSMC not found.
Nov 12 22:23:47 localhost kernel[0]: Can't load kext org.hwsensors.driver.MotherboardSensors - failed to resolve library dependencies.
Nov 12 22:23:47 localhost kernel[0]: Kext org.hwsensors.driver.MotherboardSensors failed to load (0xdc00800e).
Nov 12 22:23:47 localhost kernel[0]: Failed to load kext org.hwsensors.driver.MotherboardSensors (error 0xdc00800e).
Nov 12 22:23:47 localhost kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:47 localhost kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:47 localhost kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:47 localhost kernel[0]: Couldn't alloc class "SuperIODevice"
Nov 12 22:23:47 localhost kernel[0]: USBF:	1.360	AppleUSBOHCI[0xc97a000]::CheckSleepCapability - controller will be unloaded across sleep
Nov 12 22:23:47 localhost kernel[0]: USBF:	1.413	AppleUSBOHCI[0xbec0000]::CheckSleepCapability - controller will be unloaded across sleep
Nov 12 22:23:47 localhost kernel[0]: USBF:	1.633	AppleUSBOHCI[0xc9ac800]::CheckSleepCapability - controller will be unloaded across sleep
Nov 12 22:23:47 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
Nov 12 22:23:47 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Nov 12 22:23:47 localhost kernel[0]: USBF:	1.695	AppleUSBOHCI[0xc97a800]::CheckSleepCapability - controller will be unloaded across sleep
Nov 12 22:23:47 localhost kernel[0]: Kext org.hwsensors.driver.GPUSensors - library kext org.netkas.driver.FakeSMC not found.
Nov 12 22:23:47 localhost kernel[0]: Can't load kext org.hwsensors.driver.GPUSensors - failed to resolve library dependencies.
Nov 12 22:23:47 localhost kernel[0]: Kext org.hwsensors.driver.GPUSensors failed to load (0xdc00800e).
Nov 12 22:23:47 localhost kernel[0]: Failed to load kext org.hwsensors.driver.GPUSensors (error 0xdc00800e).
Nov 12 22:23:47 localhost kernel[0]: [RealtekRTL81xx:init] RealtekRTL81xx.kext v0.0.90 (c)2010-2011 by Lnx2Mac (lnx2mac (at) gmail.com)
Nov 12 22:23:47 localhost kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:47 localhost kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:47 localhost kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:47 localhost kernel[0]: Couldn't alloc class "GeforceSensors"
Nov 12 22:23:47 localhost kernel[0]: NVClockX: Card: 0, Device ID: ca3, Architecture: 800000, GT215 [GeForce GT 240]
Nov 12 22:23:47 localhost kernel[0]: [RealtekRTL81xx:init] _logLevel is now 132 (0x0084)
Nov 12 22:23:47 localhost kernel[0]: [RealtekRTL81xx:init] Using updated PHY config method
Nov 12 22:23:47 localhost kernel[0]: [RealtekRTL81xx:init] init completed
Nov 12 22:23:47 localhost kernel[0]: [RTL81xx@0x9000:rtl8168_init_board] NIC identified as RTL8168E-VL/8111E-VL (mcfg=16)
Nov 12 22:23:47 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Nov 12 22:23:47 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Nov 12 22:23:47 localhost kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:47 localhost kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:47 localhost kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:47 localhost kernel[0]: FireWire runtime power conservation disabled. (2)
Nov 12 22:23:47 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Nov 12 22:23:47 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Nov 12 22:23:47 localhost kernel[0]: USBF:	2.426	AppleUSBOHCI[0xc9fa000]::CheckSleepCapability - controller will be unloaded across sleep
Nov 12 22:23:47 localhost kernel[0]: FireWire (OHCI) VendorID 1106 ID 3044 PCI now active, GUID 001fc600001ac5ef; max speed s400.
Nov 12 22:23:47 localhost kernel[0]: NVClockX: BIOS successfully read
Nov 12 22:23:47 localhost kernel[0]: NVClockX: Parsing BIOS complete
Nov 12 22:23:47 localhost kernel[0]: NVClockX: Adding temperature sensors
Nov 12 22:23:47 localhost kernel[0]: NVClockX: Adding tachometer sensor
Nov 12 22:23:47 localhost kernel[0]: NVClockX: Adding frequency sensor
Nov 12 22:23:47 localhost kernel[0]: NVClockX: Overclocking...
Nov 12 22:23:47 localhost kernel[0]: USBF:	2.488	AppleUSBOHCI[0xc882800]::CheckSleepCapability - controller will be unloaded across sleep
Nov 12 22:23:47 localhost kernel[0]: USBMSC Identifier (non-unique): CN09L2G60C05J9 0x3f0 0x8e11 0x100
Nov 12 22:23:47 localhost kernel[0]: rooting via boot-uuid from /chosen: 5BB7EEC6-1C30-3F7D-96D1-227FEC8002EC
Nov 12 22:23:47 localhost kernel[0]: From path: "uuid", Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Nov 12 22:23:47 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@180000/AppleACPIPCI/SATA@11/AppleAHCI/PRT2@2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/OCZ-AGILITY3 Media/IOGUIDPartitionScheme/Lion 10.7.3 AMD@2
Nov 12 22:23:47 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Nov 12 22:23:48 localhost kernel[0]: ITEIT87x: found ITE IT8721F
Nov 12 22:23:50 Alexs-iMac kernel[0]: com_lnx2mac_RealtekRTL81xx: Ethernet address 54:04:a6:48:73:cf
Nov 12 22:23:51 Alexs-iMac kernel[0]: Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1
Nov 12 22:23:51 Alexs-iMac kernel[0]: Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
Nov 12 22:23:51 Alexs-iMac kernel[0]: Previous Shutdown Cause: 3
Nov 12 22:23:51 Alexs-iMac kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
Nov 12 22:23:51 Alexs-iMac kernel[0]: NVDANV50HAL loaded and registered.
Nov 12 22:23:52 Alexs-iMac kernel[0]: USBF:	7.818	AppleUSBOHCI[0xc882000]::CheckSleepCapability - controller will be unloaded across sleep
Nov 12 22:23:52 Alexs-iMac kernel[0]: USBF:	7.974	AppleUSBEHCI[0xc97a000]::Found a transaction past the completion deadline on bus 0x52, timing out! (Addr: 2, EP: 4)
Nov 12 22:23:52 Alexs-iMac kernel[0]: macx_swapon SUCCESS
Nov 12 22:23:52 Alexs-iMac kernel[0]: Waiting for DSMOS...
Nov 12 22:23:56 Alexs-iMac kernel[0]: ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
Nov 12 22:23:56 Alexs-iMac kernel[0]: WARNING: IOPlatformPluginUtil : getCPUIDInfo unknown CPU family: family 0x15, model 0x1
Nov 12 22:23:56 Alexs-iMac kernel[0]: -- power management may be incomplete or unsupported
Nov 12 22:23:56 Alexs-iMac kernel[0]: Sound assertion in AppleHDACodecGeneric at line 350
Nov 12 22:23:57: --- last message repeated 11 times ---
Nov 12 22:23:57 Alexs-iMac kernel[0]: DSMOS has arrived
Nov 12 22:24:00 Alexs-iMac kernel[0]: NTFS driver 3.10.1 [Flags: R/W].
Nov 12 22:24:00 Alexs-iMac kernel[0]: NTFS volume name System Reserved, version 3.1.
Nov 12 22:24:00 Alexs-iMac kernel[0]: NTFS-fs warning (device /dev/disk1s1, pid 145): ntfs_system_inodes_get(): $LogFile is not clean.  Will not be able to remount read-write.  Mount in Windows.
Nov 12 22:24:00 Alexs-iMac kernel[0]: NTFS volume name , version 3.1.
Nov 12 22:24:00 Alexs-iMac kernel[0]: NTFS-fs warning (device /dev/disk1s2, pid 152): ntfs_system_inodes_get(): $LogFile is not clean.  Will not be able to remount read-write.  Mount in Windows.
Nov 12 22:24:00 Alexs-iMac kernel[0]: HFS: Very Low Disk: freeblks: 0, dangerlimit: 376
 

I went back to 10.7.3 like a week ago, I'm pretty sure Amd is not too stable under 10.7.4 unless I'm doing something wrong. Also, my Mac side freezes if I leave it on for 10-15 hours period of time without doing anything like moving my mouse or typing. I have no idea why... I'm hoping my Hackintosh side isn't killing my Cpu and Video Card. I know those die over time, but I don't need that sped up by years.

@thebluewonderlandI just rebooted and here is a paste of my most recent kernel log. Nov 12 22:23:47 localhost kernel[0]: npvhash=4095 Nov 12 22:23:47 localhost kernel[0]: PAE enabled Nov 12 22:23:47 localhost kernel[0]: 64 bit mode enabled Nov 12 22:23:47 localhost kernel[0]: rtclock_init: Taking bus ratio path 0 (Boot-time argument) Nov 12 22:23:47…

je vois legacy_kernel !? pourquoi ? tu est sous SL 10.6 ou Lion 10.7 ?

@GodofwarI went back to 10.7.3 like a week ago, I'm pretty sure Amd is not too stable under 10.7.4 unless I'm doing something wrong. Also, my Mac side freezes if I leave it on for 10-15 hours period of time without doing anything like moving my mouse or typing. I have no idea why... I'm hoping my Hackintosh side isn't killing my Cpu and Video…

Possible ! , le mieux que tu es à faire est de revenir à SL 10.6 , les k10 fonctionnent vraiment très mal sous Lion 10.7 et tu n'as pas la gestion 64 bit .

@gilsje vois legacy_kernel !? pourquoi ? tu est sous SL 10.6 ou Lion 10.7 ?

I just have it named legacy_kernel because I haven't removed mach_kernel. I can go ahead and fix that if you think that might be causing the problem though.

@thebluewonderlandI just have it named legacy_kernel because I haven't removed mach_kernel. I can go ahead and fix that if you think that might be causing the problem though.

ah! agree! no it is not worth it.
you have patched your kernel with the patch ANV ?

osx 86.co/attachment.php?attachmentid=1645&d=1320876221

@gilsah! agree! no it is not worth it. you have patched your kernel with the patch ANV ? osx 86.co/attachment.php?attachmentid=1645&d=1320876221

I've tried. Maybe I'm not doing it right though? I run amd_insn_patcher, then do the sudo update that RAWX put on the first post with the link to it right?

@thebluewonderlandI've tried. Maybe I'm not doing it right though? I run amd_insn_patcher, then do the sudo update that RAWX put on the first post with the link to it right?

yes, you need to install this patch via terminal for proper operation;)

@gilsyes, you need to install this patch via terminal for proper operation;)

Yeah I was definitely doing it wrong lol. Thanks! New problem though. I've been able for fix a few things but I can't fix the 3 main ones in the guides (quicktime, dyld, and lib system). It seems to detect bad instructions but it won't patch them. Here is a paste of the responses.

Alexs-iMac:amd_insn_patcher_src Alex$ sudo ./amd_insn_patcher_ext /System/Library/QuickTime/QuickTimeComponents.component/Contents/MacOS/QuickTimeComponents /System/Library/QuickTime/QuickTimeComponents.component/Contents/MacOS/QuickTimeComponents
Password:
No code signature found, skipping patch
No patches found, not generating output filePatch report: 0 instructions patched, 92 bad instructions, patches bypassed: NO
Alexs-iMac:amd_insn_patcher_src Alex$ sudo ./amd_insn_patcher_ext /usr/lib/libSystem.dylib /usr/lib/libSystem.dylibPassword:Patching universal binary (2 architectures)
Patching X86_64 part (processor 16777223, architecture 0)
No code signature found, skipping patch
Patch report (1): 0 instructions patched, 30 bad instructions, patches bypassed: NO
Patching I386 part (processor 7, architecture 1)
No code signature found, skipping patch
Patch report (2): 0 instructions patched, 0 bad instructions, patches bypassed: NO
No patches found, not generating output fileAlexs-iMac:amd_insn_patcher_src Alex$ sudo ./amd_insn_lib/libSystem.B.dyliblibSystem.B.dylib /usr/ 
Patching universal binary (2 architectures)
Patching X86_64 part (processor 16777223, architecture 0)
No code signature found, skipping patch
Patch report (1): 0 instructions patched, 30 bad instructions, patches bypassed: NO
Patching I386 part (processor 7, architecture 1)
No code signature found, skipping patch
Patch report (2): 0 instructions patched, 0 bad instructions, patches bypassed: NO
No patches found, not generating output fileAlexs-iMac:amd_insn_patcher_src Alex$ 

yep !

tu as loupé quelques chose .

Activation mode 32/64 bit

Comme je le disais un peu plus haut dans le tuto , vous disposez du mode 32 bit (-legacy) ou du mode 64 bit (par défaut) mais il s'avère que les appli 32 bit comme Flash Player pour visualiser les vidéos Youtube par exemple , ne fonctionneront pas et nous n'avons pas intérêt à rester en mode 32 bit car il s'en suit de crash appli , de copier/coller non fonctionnel et du Finder non fonctionnel également , en fait , se sont les problèmes que rencontre les procs AMD non SSSE , comme la serie FX est capable 64 bit , nous allons activer le mode 32 bit via Terminal à l'aide du fameu patch AMD de ANV opérationnel sur Lion 10.7 .

donc vous allez poser le patch AMD sur le bureau et ouvrir Terminal , en suite vous saisirez ce qui est écrit en rouge sur l'image .
vous remarquerez que sur la deuxième image , il y a une ligne de commande supplémentaire , celle-ci , nous l'avons réalisé avec Nanael de Mac On PC à l'aide de team viewer , en gros comme je suis nul dans ce domaine c'est Nanael qui m'a saisi les lignes de commande dans Terminal et qui s'est fini en succès , un gros :woohoo: à Nanael !

Egalement , RAWX86 de InfiniteMac m'a mit sur la piste pour saisir les bons codes .

Donc après , chaque ligne rouge saisi vous saisirez enter , ça va de soit .

Voici les codes de RAWX86 :

@R:A:W:X86correct usage is: sudo -s amd_insn_patcher /usr/lib/dyld /usr/lib/dyld_patched cp /usr/lib/dyld_patched /usr/lib/dyld amd_insn_patcher /usr/lib/system/libsystem_kernel.dylib /usr/lib/system/libsystem_kernel.dylib_patched cp /usr/lib/system/libsystem_kernel.dylib_patched /usr/lib/system/libsystem_kernel.dylib update_dyld_shared_cache

-réseau RTL 8169

il suffit d'installer le kext dans S/B/E que vous trouverez sur osx86.net ou Multibeast .

AppleStore est fonctionnel avec vos identifiant mais pas icloud . (c'est déjà pas mal) avec un SMbios imac 12,2 2011 .

A suivre …

la veille n'est pas fonctionnel via DSDT et/ou SleepEnabler universel , je penses que le problème vient de la CG qui ne supporte pas la veille .

En résumer le PC se met en veille avec l'écran figé et redémarre avec écran noir . (reset obligé)

l'audio ALC 892 sur AMD est catastrophique , pas moyen également de la faire fonctionné correctement via DSDT + patch ALC 892 et avec voodooHDA 2.7.2/3 , le son fonctionne avec un souffle important , le préfpane voodoo est bloqué sur la sortie optique avec les réglages bloqués dans la table de mixage .

Ce qui m'a inciter à me prendre une CS compatible Mac OS .

Voilà .

je remercie toute les personnes qui m'ont aider à configurer cette plateforme AMD sous Lion 10.7 , a savoir Dmitrik aka Bronzovka , R:A:W:X86 d'InfiniteMac , Nanael de Mac On PC , les membres HMM , Malik , teteuf1 et les autres dont j'ai oublié leurs noms .

@gilsyep ! tu as loupé quelques chose . Activation mode 32/64 bit Comme je le disais un peu plus haut dans le tuto , vous disposez du mode 32 bit (-legacy) ou du mode 64 bit (par défaut) mais il s'avère que les appli 32 bit comme Flash Player pour visualiser les vidéos Youtube par exemple , ne fonctionneront pas et nous n'avons pas intérêt…

Awesome! Thanks so much, I can actually start chrome and use it. Yet another problem came up though (lol). It seems as though there is an encoding error of some sort. The console says IOError PNG, and it also says it converts 7 bit data to binary. The result is the new tab button is mostly invisible and a lot of the font on chrome itself (not on webpages) is pretty much illegible. I've tried to patch fonts and various different packages in chrome that I found in Activity monitor but I've had no success thus far.

It also may be worth noting that the same thing happens if I boot into -legacy, all font is messed up though, not just in chrome.

Once again, thank you so much for all your help.

@gilsmaybe chrome need an update ?

No it's all 32-bit apps that this happens with. They work, but text rendering seems to be broken or something. When i boot with the -legacy flag, everything broken text. Here is a screenshot of what it looks like.

You can't see it in that picture but the text in the top left of the menu bar where it would say "Chrome File Edit etc.." is also messed up like that. Happen to have any ideas? I've gone and patched virtually everything I could think of and all dependencies of chrome, including attempts to patch parts of chrome itself and have had no success.

EDIT: Also, I just remembered that images will render weird as well. Here is a screenshot of a random image that has rendered wrong.

@thebluewonderlandNo it's all 32-bit apps that this happens with. They work, but text rendering seems to be broken or something. When i boot with the -legacy flag, everything broken text. Here is a screenshot of what it looks like. You can't see it in that picture but the text in the top left of the menu bar where it would say "Chrome File Edit etc.."…

Perhaps an update to java?

@gilsPerhaps an update to java?

Alright so this isn't normal, and it's mostly likely not an issue related to 64-bit stuff. I'll go through and update OpenCL, Java, QuickTime, and whatever other rendering dependancies I can find and I'll post back here when I figure out whatever was causing the problem.

Alright, I ended up having to just reinstall Lion and I only patched 2 files this time and everything works great. Font rendering is normal and graphics rendering is as well. Both 32-bit and 64-bit apps are functioning perfect and benchmarks look great! Thanks again for everything.

@thebluewonderlandAlright, I ended up having to just reinstall Lion and I only patched 2 files this time and everything works great. Font rendering is normal and graphics rendering is as well. Both 32-bit and 64-bit apps are functioning perfect and benchmarks look great! Thanks again for everything.

good news !

champagne ! ^_^

Cheers! Thanks again for all your help. I'll try and drop by from time to time to help others with what I can, and maybe I'll write a guide on how I did it.

@thebluewonderlandCheers! Thanks again for all your help. I'll try and drop by from time to time to help others with what I can, and maybe I'll write a guide on how I did it.

very good idea!

+

gils
***
i see u are tesing kernel 12.0 amd ? does it work well for u

@ham4evergils *** i see u are tesing kernel 12.0 amd ? does it work well for u

hello ,

I'd like to, there is a group working on InsanelyMac 12.0 x86_64 kernel says that is not easy to achieve, it is the stage of development on the emulator SSSE3, there are several kernel beta but not yet operational.
the road is still long! …

@gilshello , I'd like to, there is a group working on InsanelyMac 12.0 x86_64 kernel says that is not easy to achieve, it is the stage of development on the emulator SSSE3, there are several kernel beta but not yet operational. the road is still long! …

Thanks for ur fast answer ,
SSSE3 emulator thats so gooood news

any help, i updated to 10.7.4 and i lost ethernet
Refusing new kext com.apple.iokit.IONetworkingFamily, v2.1: already have loaded v9.9

i have FX-4100,i have dopwnload last kernel,and put it afther installing iatkos l2 but when i try to run it its crash/reboot,i have try every f****** boot flag and allwheys the same stuff. . .

How do I make Hackintosh Lion 10.7.3 self boot on an Amd Phenom II x4 965 3.4ghz, GTX 570, 4 gigs of ddr3 ram? What goes in the files. Right now I'm typing -legacy UsekernelCache=NO PCIRootUID=0 npci=0x3000, and I don't even think that is the right command since sometimes Hackintosh Lion 10.7.3 will boot with those commands but sometimes it won't.

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Boot Graphics</key>
	<string>Yes</string>
	<key>EthernetBuiltIn</key>
	<string>Yes</string>
	<key>GraphicsEnabler</key>
	<string>Yes</string>
	<key>Kernel</key>
	<string>mach_kernel</string>
	<key>Kernel Flags</key>
	<string></string>
	<key>Quiet Boot</key>
	<string>No</string>
	<key>Timeout</key>
	<string>5</string>
	<key>npci</key>
	<string>0x2000</string>
</dict>
</plist>

Man this new command I'm using is bad, it takes 2 times for me to shut down my computer before when the old command got my Mac side working by shutting it down once before it finally booted up operating system. I would prefer a command that I wouldn't have shut my pc down improperly but I doubt a command exists for me.

Thanks for your help.

Got it to work, but now it doesn't do Chameleon bootloader but a Black Bootloader thing which I can live with since it works better than seeing the Blue/Grey Chameleon loader. It now selfboots automatically because I have the correct commands in extra folder.

It boots everytime on the first try but the problem is now that I'm falling more in love with Windows 7 because Mac's Operating systems lack software that I use on Windows. I can't get Handbrake to work right on Mac's operating system like when I want to preview quality. Mac is also missing software like Nero for burning movies to dvds which I do.

I don't know, I'm starting to ask myself what the big deal is about everyone loving Macs other than the fact that their operating system looks cool but lacks software. I mean it's nice that you don't have to worry about viruses, spyware as much but other then that it's nothing really all that special. Sorry if I offended anyone.

still waiting

sadly on the latest kernel i get still waiting for root device

thanks for your amazing work though i wasnt even getting that far before because of my setup

im on Chip AMD Athlon x64 3000+
Mobo ASRock K8S8
HDD Sata 1TB
CD DVD Rom External usb
CD DVD Rom Internal Sata bluray
2GB Ram

this was on 10.7.4 that i tryied with your kernel RAW, someone perhaps a fresh set of eyes could tell me ?

i plugged the hdd onto another hackintoshed machine, ran myhack 3.2 then dropped in your kernel and modded the extra/chameleon.boot.plist folder to take your kernel , then repaire perms* and shut down on that machine i then unplugged the drive and put it onto the machine in question still root device boo lol... but thats must be my setup

tried

-x -f -F -v -s rd=disk0s2 pcirootuid=1/0 graphicsenabler =no yes - then i tried updating to chameleon 2.2 r2187 or something

thank you everyone for trying to make a working kernel but its not for me yet unless anyone has any ideas please do share ive tried some guides etc for amd but … there a no go

cant thank you enough tho test 30 didnt work yet for me unless i need different flags
Bobert

@bobertsadly on the latest kernel i get still waiting for root device thanks for your amazing work though i wasnt even getting that far before because of my setup im on Chip AMD Athlon x64 3000+ Mobo ASRock K8S8 HDD Sata 1TB CD DVD Rom External usb CD DVD Rom Internal Sata bluray 2GB Ram this was on 10.7.4 that i tryied with your kernel RAW,…

hello ,

bios is AHCI ?

wath graphics card ?