TX2500z hardware

darkassain · #1 10-13-2008, 09:33 PM

well i was able to install leo4all v4.1.1
but i have to find all the kexts for all the devices for anyone here that can help me these are my specs:
everest file

Code:

--------[ Motherboard ]-------------------------------------------------------------------------------------------------

Motherboard Properties:
Motherboard ID <DMI>
Motherboard Name Hewlett-Packard HP Pavilion tx2500 Notebook PC

Front Side Bus Properties:
Bus Type AMD K11
Bus Width 64-bit
Real Clock 200 MHz
Effective Clock 200 MHz
HyperTransport Clock 1800 MHz
North Bridge Clock 3600 MHz
Bandwidth 1600 MB/s

Memory Bus Properties:
Bus Type Unganged Dual DDR2 SDRAM
Bus Width 128-bit
DRAM:FSB Ratio 12:6
Real Clock 400 MHz (DDR)
Effective Clock 800 MHz
Bandwidth 12800 MB/s


--------[ Memory ]------------------------------------------------------------------------------------------------------

Physical Memory:
Total 2812 MB
Used 1451 MB
Free 1361 MB
Utilization 52 %

Swap Space:
Total 5816 MB
Used 1737 MB
Free 4078 MB
Utilization 30 %

Virtual Memory:
Total 8628 MB
Used 3189 MB
Free 5439 MB
Utilization 37 %

Paging File:
Paging File C:\pagefile.sys
Current Size 3112 MB
Current / Peak Usage 357 MB / 358 MB
Utilization 11 %

Physical Address Extension (PAE):
Supported by Operating System Yes
Supported by CPU Yes
Active Yes


--------[ SPD ]---------------------------------------------------------------------------------------------------------

[ DIMM1: Samsung M4 70T2864QZ3-CF7 ]

Memory Module Properties:
Module Name Samsung M4 70T2864QZ3-CF7
Serial Number 75569529h (697652853)
Manufacture Date Week 32 / 2008
Module Size 1 GB (2 ranks, 8 banks)
Module Type SO-DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh

Memory Timings:
@ 400 MHz 6-6-6-18 (CL-RCD-RP-RAS) / 24-51-4-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-43-4-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-34-3-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)

Memory Module Manufacturer:
Company Name Samsung
Product Information http://www.samsung.com/Products/Semi...DRAM/index.htm

[ DIMM2: Samsung M4 70T5663QZ3-CF7 ]

Memory Module Properties:
Module Name Samsung M4 70T5663QZ3-CF7
Serial Number 474E7CB8h (3095154247)
Manufacture Date Week 31 / 2008
Module Size 2 GB (2 ranks, 8 banks)
Module Type SO-DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh

Memory Timings:
@ 400 MHz 6-6-6-18 (CL-RCD-RP-RAS) / 24-51-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 333 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 20-43-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 266 MHz 4-4-4-12 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)

Memory Module Manufacturer:
Company Name Samsung
Product Information http://www.samsung.com/Products/Semi...DRAM/index.htm


--------[ Chipset ]-----------------------------------------------------------------------------------------------------

[ North Bridge: AMD RS780M ]

North Bridge Properties:
North Bridge AMD RS780M
Revision 00
Package Type 528 Pin FC-BGA
Package Size 2.1 cm x 2.1 cm
Transistors 205 million
Process Technology 55 nm
Core Voltage 1.0 V

Integrated Graphics Controller:
Graphics Controller Type ATI Radeon HD 3200
Graphics Controller Status Enabled
Graphics Frame Buffer Size 256 MB

PCI Express Controller:
PCI-E 2.0 x1 port #247 Empty
PCI-E 2.0 x1 port #2 In Use @ x1 (Broadcom BCM4322AG 802.11a/b/g/draft-n Wireless Network Adapter)
PCI-E 2.0 x1 port #3 In Use @ x1 (Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter)

Chipset Manufacturer:
Company Name Advanced Micro Devices, Inc.
Product Information http://www.amd.com/us-en/Processors/...52_873,00.html
Driver Download http://www.amd.com/us-en/Processors/...1_2336,00.html
Driver Update http://driveragent.com?ref=59

[ North Bridge: AMD K11 IMC ]

North Bridge Properties:
North Bridge AMD K11 IMC
Supported Memory Types DDR2-400 SDRAM, DDR2-533 SDRAM, DDR2-667 SDRAM, DDR2-800 SDRAM, DDR3-800 SDRAM
Revision 00

Memory Controller:
Type Dual Channel (128-bit)
Active Mode Dual Channel (128-bit) - Unganged

Memory Timings:
CAS Latency (CL) 6T
RAS To CAS Delay (tRCD) 6T
RAS Precharge (tRP) 6T
RAS Active Time (tRAS) 18T
Row Cycle Time (tRC) 24T
Command Rate (CR) 1T
RAS To RAS Delay (tRRD) 4T
Write Recovery Time (tWR) 6T
Write To Read Delay (tWTR) 3T
Read To Precharge Delay (tRTP) 5T
Four Activate Window Delay (tFAW) 18T
Write CAS Latency (tWCL) 5T
Refresh Period (tREF) 7.8 us
DRAM Drive Strength 1.0x
DRAM Data Drive Strength 1.0x
Clock Drive Strength 1.0x
CKE Drive Strength 1.5x
Idle Cycle Limit 96

Error Correction:
ECC Not Supported
ChipKill ECC Not Supported
RAID Not Supported
ECC Scrubbing Not Supported

Memory Slots:
DRAM Slot #1 1 GB (DDR2-800 Registered DDR2 SDRAM)

Chipset Manufacturer:
Company Name Advanced Micro Devices, Inc.
Product Information http://www.amd.com/us-en/Processors/...52_873,00.html
Driver Download http://www.amd.com/us-en/Processors/...1_2336,00.html
Driver Update http://driveragent.com?ref=59

[ South Bridge: AMD SB700 ]

South Bridge Properties:
South Bridge AMD SB700
Revision 00
Package Type 528 Pin FC-BGA
Package Size 2.1 cm x 2.1 cm
Process Technology 55 nm

High Definition Audio:
Codec Name Realtek ALC268
Codec ID 10EC0268h / 103C30F1h
Codec Revision 00100003h
Codec Type Audio
Supported Sound Formats 44 kHz, 48 kHz, 96 kHz, 192 kHz, 16-bit, 20-bit, 24-bit

High Definition Audio:
Codec Name Motorola Si3054
Codec ID 10573055h / 103C30F1h
Codec Revision 00100700h
Codec Type Modem

Chipset Manufacturer:
Company Name Advanced Micro Devices, Inc.
Product Information http://www.amd.com/us-en/Processors/...52_873,00.html
Driver Download http://www.amd.com/us-en/Processors/...1_2336,00.html
Driver Update http://driveragent.com?ref=59


--------[ BIOS ]--------------------------------------------------------------------------------------------------------

BIOS Properties:
BIOS Type Insyde
BIOS Version F.06
System BIOS Date 07/08/08
Video BIOS Date 05/18/08

BIOS Manufacturer:
Company Name Insyde Technology, Inc.
Product Information http://www.insydetech.com/products/products-bios.htm
BIOS Upgrades http://www.esupport.com/biosagent/in...m?refererid=40

Display adapter type ATI Radeon HD 3200 Graphics
Network Adapter Broadcom 4322AG 802.11a/b/g/draft-n Wi-Fi Adapter
Realtek High Definition Audio
these are the main devices want to get working and anybody can help me that is great...

nfoav8or · #2 10-13-2008, 10:11 PM

Your audio fix can be found here:
http://forum.insanelymac.com/index.p...3633&hl=ALC268

have you tried the Broadcom 43xx fix that should be available on that release? Try this installer:
(link removed)

For the ATI Radeon HD 3200... try using an EFI string.

Use either EFIStudio from:
(link removed)

or use ~pcwiz's OSx86 Tools Suite from:
http://pcwizcomputer.com/osx86tools/

If you plan to use an EFI string instead of a kernel extension (kext) file then beware that it is a little more in depth... don't worry, many guides have been made for it and there are those of use around who will walk you through it. I would leave this for last.

Questions...? let 'em fly.

EDIT: hopefully you got the files I placed on here in the past... we have removed the direct links to software because of the new rules but I left the links to sites. PM me if you need any help getting these again.

darkassain · #3 10-17-2008, 08:39 PM

hey thanks for the reply....
insanely mac never responded so i thouhght i might check here
so what i can see that what im about to do is to load the hardware string into the efi
before even mac even boots???
is that correct???
ok will try...
thanks

nfoav8or · #4 10-17-2008, 08:49 PM

EFI strings are loaded upon successful loading of the com.apple.Boot.plist file located in /Library/Preferences/SystemConfiguration/ folder. This file is loaded upon boot-up of your partition. The strings are placed in this file in HEX format so that the system can better see the hardware on a "closer to binary" level without it getting as messy as machine code. The EFI string points to the hardware and tells the system what it is so no external kernel extensions are needed. However, I have noticed the CI/QE capabilities sometimes are hit-and-miss with EFI. Properly done, it would allow your system to run more natively. If not, then you'll have to resort to the kernel extensions for your model (as of now, I'd have to look them up... not on the top of my head right now).

darkassain · #5 10-31-2008, 07:46 AM

sorry...
havent replied yet
have had college midterms...
have leo4all reinstalled again with no hardware option other the the ones deem necessary
will try again with all the with was mentioned
didnt work the first time
but will try again..

nfoav8or · #6 10-31-2008, 05:14 PM

no problem. let me know how you are attempting to get them to work and maybe we can lend some assistance from here. at least you are able to boot, right?

tx2zOSX · #7 07-09-2009, 07:45 AM

Quote:

For the ATI Radeon HD 3200... try using an EFI string.

Use either EFIStudio from:
(link removed)

or use ~pcwiz's OSx86 Tools Suite from:
http://pcwizcomputer.com/osx86tools/

If you plan to use an EFI string instead of a kernel extension (kext) file then beware that it is a little more in depth... don't worry, many guides have been made for it and there are those of use around who will walk you through it. I would leave this for last.

Questions...? let 'em fly

hi, thanks for this info, im kinda confused. Does this add support for the ATI Radeon HD 3200? I have a tx2z with ATI HD 3200 but i cant get photobooth or iMovie to work because it says the graphics card is not supported. in the system info it says QUARTZ not supported. any help please?