InfiniteMac OSx86  


Reply
 
Thread tools Display modes
  #1  
Old 01-27-2009, 08:38 AM
emice emice is offline
Cheetah
  
Join Date: Jan 2009
Posts: 2
SATA Burner on Nforce4 SLI w/ integrated Silicon Image 3132
I'm putting together an AMD system with a Foxconn NF4SK8AA-8EKRS motherboard that uses the Nforce4 SLI chipset. I've been shopping for a burner to complete this rig, but have read that SATA burning is not supported with NF4 chipset SATA ports because of a problem in the NF4 SATA driver kext.

The thing is my board includes an additional onboard Silicon Image 3132 PCI-E SATA controller. If I use the a port from the 3132 chip for the burner, will I be able to burn on this setup without the NF4 SATA driver kext interfering? I will be loading that kext on top of the 3132 kext because I need the NF4 SATA ports for my boot drive and data drive.

I've repeatedly seen the 3132 recommended for use with OSx86 as an add-on card, and I assume that the integrated chip on the motherboard should show up just the same (as a PCI-E device) and should work using the same drivers.

Also, any specific SATA burners you guys recommended? I have been looking at Lite On and Pioneer. Thanks.
Last edited by emice; 01-27-2009 at 08:41 AM.
Reply With Quote
  #2  
Old 01-27-2009, 09:40 AM
naquaada's Avatar
naquaada naquaada is offline
 
Join Date: Jan 2008
Location: Germany
Posts: 1,216
The SiliconImage 3112 controllers are for harddisk only. Use a nForce 4 port or best an IDE burner - it's most comatible.
2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination.

My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64
Reply With Quote
  #3  
Old 01-28-2009, 05:15 AM
emice emice is offline
Cheetah
  
Join Date: Jan 2009
Posts: 2
Quote:
Originally Posted by naquaada View Post
The SiliconImage 3112 controllers are for harddisk only. Use a nForce 4 port or best an IDE burner - it's most comatible.
Does the same apply to the 3132? The motherboard in your sig uses a 3112/3114, a PCI model, but the 3132 is a newer and is on PCI-E. Silicon Image offers official OS X drivers for the newer 3132 based PCI-E cards, but didn't for the older 3112/3114 models.

Official Silicon Image 3114 Drivers
Official Silicon Image 3132 Drivers

I can't find a single account of someone running a burner off a 3132 based card but figured it would work because of how widely recommended that chip is for OS X.

Also, I have read in several places that nforce4 SATA burning doesn't work, but those accounts were from a few months ago. I don't think it should work. Are you running an SATA burner on your nforce4 SATA ports?

I will probably avoid the headache and just get an IDE model, the only issue is cable clutter affecting airflow, and not being able to reuse the drive in a newer system. Annoying, but not a dealbreaker.
Reply With Quote
Reply



Archive - Privacy - Top