 |
|
|
|
#1
04-25-2009, 11:28 AM
|
|||
|
|||
|
Stuck at Apple Logo
I managed to install OS X using the iDeneb 1.4 ISO and set up a dual boot with windows 7 without any problems but I get stuck at the apple logo. Nothing happens and it doesn't seem like the hard drives are loading anything.
Any ideas on what I can do from here? My PC: Intel Core 2 Quad Q9450 Asus P5Q P45+ICH10R ATI HD4870 512MB 2x2GB G.Skill PC-6400 500GB + 640GB WD Cavier SE 7200rpm Creative X-fi Xtreme Music This is what I get when I boot with -v or with -x -v. It just stays like this with no change.   Any help would be greatly appreciated. 
|
|
#2
04-25-2009, 05:44 PM
|
||||
|
||||
|
Looks like you need to replace your ACPIPlatform.kext with a compatible one if you did not check ACPIPlatform.kext option during the install. or make sure your Bios is setup right
ACPI 2.0 Support - Enable ACPI APIC Support - Enable OS : Mac OS X Leopard 10.5.6 (9G55) Retail | MoBo : EVGA 132-BL-E758-A1 | CPU : Intel® Core i7 940 Nehalem 2.93GHz [OC'4GHz] Dual-Display : Viewsonic VX2260WM Video Card : EVGA GeForce GTS 250 1GB [QE/CI] | RAM : CORSAIR DOMINATOR 12GB [6 x 2GB] DDR3 1600Mhz Hard Drive : SAMSUNG Spinpoint F1 [4x 1TB] | SAMSUNG Spinpoint F1 [2x 500GB] | DVD Drive : Dual Pioneer DVR-216DBK WiFi : LINKSYS WMP300N [Wireless-N] | Audio : M-AUDIO Delta 1010LT | Case/PSU : Silverstone TJ07/CORSAIR 1000HX 1000W
|
|
#3
04-25-2009, 06:39 PM
|
|||
|
|||
|
ACPI 2.0 Support was Disabled so I enabled that but it didn't change anything regarding the boot process. I'm still stuck at the same line.
Does iDeneb 1.4 come with this ACPIPlatform.kext in the installer or do I have to download it seperatley? Do you think it will fix the problem? Thanks.
|
|
#4
05-01-2009, 02:48 PM
|
||||
|
||||
|
Try "platform=X86PC" as boot flag. so you can skip ACPI checks.
CPU: Intel Pentium Dual E2140 1.6 GHz. Graphics: Intel(R) 82945G (128 MB). Board: Asus P5GC-TVM/S Chipset: Intel Lakeport-G i945GC. HDD: 232 Gb S-ATA Samsung Version 10.6.2 32bit. Kernel: Vanilla. Audio: VoodooHDA 0.2.2 with prefpane. Video: Stock GMA. PS2 fix: VoodooPS2 USB 2 not working Acer Aspire 4530-6823 CPU: AMD Athlon™ X2 QL-62 2.0GHz. Graphics: Integrated GeForce® 9100M G. Chipset: nForce® MCP77MH.
|
|
#5
05-01-2009, 03:52 PM
|
|||
|
|||
|
Hi erick, I tried using that command running iPC 10.5.6 and it didn't change anything. I still get stuck when I try to reboot.
I'm thinking I might be looking at this the wrong way. Whenever I install a kext file it has no effect on my install. The entry shows up when I do a kextstat but the kexts never work. I tried installing my ethernet and sounds kexts and many other kexts and they don't seem to function at all. Maybe if I could manage to get the kexts to start working probably I can use a fix to help my restart/shutdown issue. Now what can I do to get kexts to install properly? I usually use kext helper, though I've tried the OSx86Tools Kext installer and I have tried installing manually as well. None seem to work. Any help? EDIT: Wait a minute I thought this was a reply to another topic I had. I managed to get passed the apple logo and installed successfully but I still have some problems. Major ones at that. http://www.infinitemac.com/f5/hangs-...hutdown-t2717/ CPU: Core 2 Quad Q9450 Motherboard: Asus P5Q + ICH10R GPU ATI HD4870 RAM: 4GB G.Skill 800Mhz HDD: 500GB + 640GB WD Cavier SE16 Audio: Creative X-fi Xtreme Music Last edited by gfxl; 05-01-2009 at 03:55 PM.
|
 |
Hybrid Mode
|
|