Msi nx 6600 td256e - qe | ci

[Undead Surfer]

This is my scenario.

I'm running Leopard 10.5.5 on my MSI P6N Diamond motherboard. So far it's running ok but my main qualm is with my graphics card.

The Graphics Card that I'm running as can be seen from the title of this thread is the MSI NX 6600 TD256E card. The link to that is here - http://www.msicomputer.com/product/p...Lite&class=vga

Initially, I was able to change resolutions and get some additional functionality by using NVInject. I then installed PC EFI v9 and attempted to use the EFI strings. I was able to get this far by adding my NVCAP value to the hex and pasting it into the boot.plist file:-

http://www.carichat.net/Downloads/6600256.png

Would anyone be able to give me insight into whether my card just doesn't support Quartz Extreme and Core Image? Or insight into what to do to get it working?

[alphabeta23]

Have you tried NVDarwin? I have the same card and EFI strings didn't work since 10.5.4 or .5 for me.
With NVDarwin Quartz Extreme and Core Image are supported.


Good luck!

[Undead Surfer]

Thanks a lot for the advice. I have downloaded and installed it. I'm just pending a reboot. Before I did that, I wanted to share the results of my research.

NVDarwin is succeeded by CoreVidida.

The latest version that I have seen is 1.1

The original link to the peeps who release it is followed by a Google Translate Link:-
http://osx86tuga.com/index.php?showt...readed&pid=272

http://translate.google.com.vc/trans...%3Den%26sa%3DG

Hope that this may help someone. I'll post back with an update as to the results after my reboot.

Thanks again.

[Undead Surfer]

No dice. Exact results as with the EFI String.

Would it be possible for you to attach the Info.plist for your CoreVidia kext?

I'll attach mine as well so that we can compare differences and see if there is something I missed. I had to tag .txt onto the end of the file so that it would upload.

Thanks in advance.

[alphabeta23]

Yes, of course - if you can explain me where to find the info.plist for the Corevidia.kext!





NVIDIA GeForce 6600:

Chipsatz-Modell: NVIDIA GeForce 6600
Typ: Monitor
Bus: PCIe
PCIe-Lane-Breite: x16
VRAM (gesamt): 256 MB
Hersteller: NVIDIA (0x10de)
Geräte-ID: 0x0141
Versions-ID: 0x00a2
ROM-Version: NVdarwin 1.2.5
Monitore:
Monitoranschluss:
Status: Kein Monitor angeschlossen
SyncMaster:
Auflösung: 1280 x 1024 @ 60 Hz
Farbtiefe: 32-Bit Farbe
Core Image: Hardware-unterstützt
Hauptmonitor: Ja
Synchronisierung: Aus
Eingeschaltet: Ja
Quartz Extreme: Unterstützt
Rotation: Unterstützt
QuartzGL: Unterstützt

[Undead Surfer]

Sure, no problem at all.

Navigate to /System/Library/Extensions/

Right click on CoreVidia.kext and click "Show Package Contents" in the contextual menu. In the folder that pops up, you will see the Info.plist file.

Thanks in advance.