![]() |
|
#1
|
|||
|
|||
Blue screen flashes then turns black after successful Iatkos 5i istallation on a Gate
Ok, heres what I need help with. I successfully installed iAtkos 5i on my Gateway P-6313, here are the specs:
http://www.support.gateway.com/s/Mob...5639Rsp2.shtml so what happens is that after iAktos succcessfully installed, and i attempted to boot up hackintosh for the first time, the apple loading screen with the wheel came, then after a minute the screen flashed blue for about 2-3 seconds, then turned black and thats it, what can i do to prevent this and successfully boot into hackintosh? Please help! |
#2
|
|||
|
|||
when it says Press F8 to enter startup options press it, then enter -v -x, tell us what happens, and what the last line is when it stops working.
Computer: Gateway 838GM | 9.5.0 Vodoo Kernel |2.0 RC4 Chameleon Bootloader | Processor:Intel Pentium 4 630 / 3 GHz | RAM: 512MB | OS: Windows 7 32BIT, OSx86 iPC 10.5.6 | Mainboard Chipset: Intel 915G Express | Graphics Card:Integrated Intel GMA 900 | Video Memory: Dynamic Video Memory Technology 3.0 | Audio:ALC 860 |Card Reader:8 in 1 Integrated| Hard Drives:1x 200GB SATA(Win 7), 1x 320GB SATA(OS X) Both Internal
|
#3
|
||||
|
||||
Boot with -x for the first time. It probably has problems with loading the welcome video as your gfx is not yet supported.
www.ultimae.com Panoramic music, for panoramic people. AMD Phenom II X6 3.5Ghz AMD 990FX Chipset Kingston HyperX 16GB 1600Mhz AMD Radeon HD6850 X2 CrossFire Seagate Barracuda Green 2TB |
#4
|
|||
|
|||
Same problem here
Hey everyone. I'm hoping somebody can help me out here. I have this exact same problem. I ran -v -x it loads a bunch of things then it goes black then every a minute or so it flashes green and goes black again and one of my monitors turns to "No Signal"
I would REALLY appreciate some help. My system is: CPU: Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core MOBO: GIGABYTE GA-EX58-UD4P LGA 1366 Intel X58 ATX Intel Motherboard RAM: CORSAIR XMS3 6GB VIDEO: 2 x SAPPHIRE 100258-1GL Radeon HD 4850 1GB 256-bit GDDR3 (In crossfire mode, using DVI ports) These are the options I selected: PARTITION: Mac OS Extended (Journaled) SYSTEM: iATKOS v5i Main System BOOTLOADER: Chameleon DECRYPTER: AppleDecrypt SMBIOS DRIVER: SMBIOS-Resolver KERNAL: 9.5.0 Kernel fassl ACPI: Stock ACPI Modified Disabler.kext Drivers: VGA - Natit Universal SYSTEM - Intel SATA NETWORK: nForce Ethernet Again any help you can provide would be GREATLY appreciated ![]() Last edited by cabofixe; 06-20-2009 at 06:09 PM. |
#5
|
|||
|
|||
Delete NVDAresman.kext !
This is the ofending kext 99% of the time. You sould have your screen, but with stock resolution and no QE CI, but this is also a symptom of a non-correct gfx setup anyways. From here, at least, you are able to test the system, retrieve info, install kexts to test etc etc... _____________________________________________ Acer 6936g 864G32mn [@ Snow Leopard 10.6.1 32/64bit C2D 2,4Ghz 4Gb 1066mhz DDR3 9600m GT 512 GDDR3 ___Snow Leopard tutorial -> http://www.infinitemac.com/f57/guide...ted-for-t4183/ _________Leopard tutorial ->http://www.infinitemac.com/f19/guide...-iatkos-t3357/ |
#6
|
|||
|
|||
Nothing to do with NVDAresman.kext. The problem is that your Intel GMA X3100 isn't supported in 10.5.5. So forget 5i (which is 10.5.5).
Apple added pretty decent support for the X3100 in 10.5.6 (but still many cards failed) and 10.5.7 (which pretty much works for everyone). Download iAtkos 10.5.7 and give it a go. You should get full QE/CI. -- MacBook Pro - have allergy to nickel in the aluminum casing. So my kid gets an expensive toy! ![]() Gateway MX 8738 - Retail, vanilla Snow Leopard 10.6.2 (thanks kizwan!) with Chameleon RC4, modified DSDT. Upgraded to Core 2 CPU (easy to do). Upgraded to 640GB drive. Everything but SD card working. Minor niggles. GMA950 with QE/CI and *no* artifacts. ![]() iMac (luxo/lamp) G4 with Tiger. |