![]() |
|
#1
|
|||
|
|||
Install help on S10 Lenovo
I have read it all over the web and seen it on youtube. I have downloaded MSIWindosx and Kalyway, Tried 2 different HD's Burnt DVD's many different times at different speeds. All boots up, but at the install part, it stops an says Basesystem could not be verified. Any body have any clue what might be going on?
S10 Lenovo 1.6 ATOM 1.5gig ram 120gig HD |
#2
|
|||
|
|||
Nobodys ever tried putting OSX on a lenovo?
|
#3
|
|||
|
|||
I guess i am the only one with a lenovo s10.
|
#4
|
|||
|
|||
did u even try google? or even looking around on some of the google sites?
first result, a complete guide for your computer http://www.s10lenovo.com/viewtopic.php?f=33&t=1187 Google is your best friend, ![]() Computer: Gateway 838GM | 9.5.0 Vodoo Kernel |2.0 RC4 Chameleon Bootloader | Processor:Intel Pentium 4 630 / 3 GHz | RAM: 512MB | OS: Windows 7 32BIT, OSx86 iPC 10.5.6 | Mainboard Chipset: Intel 915G Express | Graphics Card:Integrated Intel GMA 900 | Video Memory: Dynamic Video Memory Technology 3.0 | Audio:ALC 860 |Card Reader:8 in 1 Integrated| Hard Drives:1x 200GB SATA(Win 7), 1x 320GB SATA(OS X) Both Internal
|
#5
|
|||
|
|||
first let me say thank you for your reply. I have googled and even yahooed till my hearts content. I have yet to fine te same symtom that i am getting. Not just in osx, but in linux as well. This leads me to believe its a hardware issue.
|
#6
|
|||
|
|||
Linux is acting the same as OS X? yea then it HAS to be a hardware issue... which is kinda odd because there are people(link i posted) who have been able to successfully been able to install OS X on there computer...
Computer: Gateway 838GM | 9.5.0 Vodoo Kernel |2.0 RC4 Chameleon Bootloader | Processor:Intel Pentium 4 630 / 3 GHz | RAM: 512MB | OS: Windows 7 32BIT, OSx86 iPC 10.5.6 | Mainboard Chipset: Intel 915G Express | Graphics Card:Integrated Intel GMA 900 | Video Memory: Dynamic Video Memory Technology 3.0 | Audio:ALC 860 |Card Reader:8 in 1 Integrated| Hard Drives:1x 200GB SATA(Win 7), 1x 320GB SATA(OS X) Both Internal
|
#7
|
|||
|
|||
I experienced a similar problem with MSIWindosx86.iso ... installation would start, but ultimately it would fail. The installer.log said that one of the packages was corrupt.
Increasing my memory from 1GB to 1.5GB and connecting an external monitor allowed me to test other installations ( I hadn't seen that having an external monitor would allow me to have enough screen real estate to complete the installations ). Since it's been quite awhile, I'm curious if you ever solved the problem you reported. |