InfiniteMac OSx86  


 
 
Thread tools Display modes
Prev Previous Post   Next Post Next
  #1  
Old 05-18-2008, 06:36 PM
naquaada's Avatar
naquaada naquaada is offline
 
Join Date: Jan 2008
Location: Germany
Posts: 1,216
Hi guys, here we can talk about BIOS settings. But first about the Toast thing, maybe it could help someone.

Since I upgraded my Board to the Opteron 185 and 4 Gig RAM, I couldn't save or burn bigger (>1GB) toast images anymore, it always crashed at 39-45%. I had no idea what it could be. Was it the Opteron? It worked on all Athlon 64 with similiar boards and up to 3 Gig RAM. Later I took out some RAM bars and then it worked, with 2 Gig only. But I needed more RAM. During my overclocking experiments I found in two DRAM setting entries with mapping over 4GB. My board can only handle 4 GB, so I disabled them. After this Toast worked again.

Maybe we should take a look at the BIOS settings and share experiences. How much is the BIOS used from OSx86? Sometimes it seems it don't cares about it at all. I had a NEC DVD-RW drive which wasn't detected in BIOS at all. In MacOS it was available and I can even burn with it. Some boards needs to diable USB Legacy support, some don't. What settings should be used fpr Plug'n'Play OS? I have it set to 'No.'

What you can do if you use your PC only for MacOS is to disable all unneccessary components, like parallel port, gameport, midi port, modem, not supported RAID or LAN controllers and of course the floppy disk controller. If you don't need all hard drive ports set the drive type to 'none', this speeds up booting.

Any Ideas?

2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination.

My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter MIDI: M-Audio Midiman 4x MIDI interfaceBehringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64
Reply With Quote