#1
|
||||
|
||||
HOWTO install Retail Leopard on Intel, near retail on AMD. Inclusive of Chameleon 2.0
NOTES: I would be very grateful if an AMD user could let me know how this works, I tried this on a Intel Celeron with success, So I assume its much the same on an AMD CPU. I have taken a load of info from a load of different places to build up the AMD guide, but I can't verify it works, as I don't have any AMD hardware. Thank you.
Things needed: A Leopard retail install DVD.. buy it, its well worth it! A compatible computer. to run a retail copy of Leopard you need an Intel CPU from the core CPU family.. e.g Atom Core 2 Duo Core 2 Quad etc For everything else, theres masterca... i mean Voodoo. (AMD etc) A boot132 disc Download generic iso from here (Intel only, AMD method below) http://www.mediafire.com/?1ne1zbl4znv If this doesn’t work, then you can make your own with the kexts you know you need by following these instructions.. (note: this part of the tutorial assumes you have a working Mac OS X installation) Intel core CPU users users.. Open terminal and type the following.. Code:
mkdir iso enable R/W on initrd.img Code:
chmod 777 iso/initrd.img Code:
hdiutil attach iso/initrd.img Code:
hdiutil resize -size 20MB iso/initrd.img Code:
<key>OSBundleRequired</key> <string>Root</string> When your done copying your kexts.. Code:
hdiutil detach /Volumes/initrd Code:
hdiutil makehybrid -o new.iso iso/ -iso -eltorito-boot iso/isolinux.bin -no-emul-boot For AMD and non-core family Intel CPUs, follow this guide. Options It is far easier to have Mac OS X as the only OS, but it is possible to have other OS’s, not something I have done before or have experience with (I have all my other OS’s on my MacBook and then just Mac OS X on my hac), so you will have to have a play yourself. Heres info, I’m afraid your a bit on your own here.. Dual boot with XP I did have success with the old darwin bootloader (pre 2.0) and I successfully dual booted Windows 7.. straight after I installed it, I had to activate my bootloader partition (howto below) and then repair the 7 install.. Booting the Leopard install disc with Vanilla goodness pop the boot-132 disc in your machine and boot from it.. hit enter at the first menu. swap the boot-132 disc for the leopard retail DVD, enter disc drive ID (should be in the brackets) hit enter. You may enter -v as a startup option if you want verbose mode. Booting the Leopard install disc with Voodoo.. follow this. Installing When you get to the install screen, follow the onscreen instructions until you get to the window asking you to select a drive. From the top menu bar, click utilities, then Disk Utility. Assuming you want to use the whole drive for Leopard and don’t have any important data on it, make two partitions (GUID partition table can be selected by clicking “Options” and selecting it). One partition for the bootloader and one for Leopard. Ideally, the bootloader partition should be about 200MB, but Disk Utility seems to have a problem making partitions that small.. so, make it as small as you can. When done, close disk utility, and proceed with the install, obviously installing Leopard on the Leopard partition, NOT the bootloader drive. Post-install When the install is done, swap the Leopard disc for your boot132 disc, hit enter, then type “80” for first HD, “81” for second and so on, and so forth.. Hit enter again select your Leopard install partition and hit enter again. It should now boot into Leopard, but we’re not done yet! We don’t want to have to use a disc everytime we want to boot! download the chameleon bootloader from here Install it to your bootloader partition. When thats done, download one of the packages attached to this post called either “preferencesIntelcore.zip” (If you have an Intel core CPU) or “preferencesAMDoldIntel.zip” (If you have an older Intel CPU or AMD CPU) unzip the the file. Open the booloader partition in the Finder. You should see a folder called “Library”. Copy the preferences folder that you unzipped, into the library folder. Now go back to the root of the bootloader partition, open the folder called “Extra” and copy the kexts needed for your hardware into the folder called “Extensions”. (If your unsure about which kexts to use, copy the kext files that were used on the boot132 disc) With all that done, its time to activate the partition so it can be booted. Open terminal and type in the following... Code:
diskutil list Code:
/dev/disk0 (<DRIVE NUMBER) #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *74.5 Gi disk0 1: EFI 200.0 Mi disk0s1 2: (Partition number) Apple_HFS Boot 1.9 Gi disk0s2 3: Apple_HFS Mac HD 72.2 Gi disk0s3 Code:
sudo fdisk -e /dev/rdisk*INSERT DRIVE NUMBER HERE* Code:
f *INSERT PARTITION NUMBER HERE* w y q AMD and older Intel users, download the voodoo kernel from here Install it to your Leopard installation drive, and reboot. If it doesn't, review the steps. Benefits of having the bootloader on a separate drive It means you can have a completely vanilla and untouched install. Easy to reinstall if you ever need to. Previously known as NebulOSX. MacBook, 2.1GHz Core 2 Duo Penryn, 2GB RAM, x3100 Graphics. - Mac Nano (Benchmarks)- Gigabyte GA-GC230D, Intel Atom 230 1.7GHZ (Overclocked), 2GB 533Mhz RAM, Mac OS X Leopard: Boot132 Method. ULTRAcheap build. With desktop GMA950 graphics fix. My Twitter Last edited by NebKiwi; 04-28-2009 at 09:53 AM. |
|