InfiniteMac OSx86  


Reply
Page 22 of 23 « First < 122021 22 23 >
 
Thread tools Display modes
  #1  
Old 08-25-2010, 02:28 AM
Aqxea Aqxea is offline
Cheetah
  
Join Date: Aug 2010
Posts: 4
Thanks Adrenaline1965. I'll give that a try and report back. I have an OSX 10.6.3 disk. Will that work with Empire EFI?
Reply With Quote
  #2  
Old 08-28-2010, 06:46 PM
itry2hide itry2hide is offline
Cheetah
  
Join Date: Nov 2009
Posts: 5
Quote:
Originally Posted by Adrenaline1965 View Post
Just upgraded to Mac OSX 10.6.4 without any problem! All hardware functions are fully operational (including the WiFi <= see earlier post). Only remaining problem is still Shut down / Restart...
I lose audio when I go to 10.6.4. I am currently running 10.6.2, RC4, and the original dell kext pack, plus most current sleep enabler. Any ideas?
Gigabyte GA-G31M-ES2L • Q9400 Core 2 Quad overclocked to 3.19 GHz • Zotac 9400GT-• 4 GB ram • SL 10.6.2 • VMWare Fusion
Dell D630 with Intel X3100 • [email protected] GHz • 2 GB ram • SL 10.6.2 • Crossover 9.0
Dell Mini 10v • Dual boot Win XP and SL 10.6.2
Reply With Quote
  #3  
Old 08-29-2010, 07:46 PM
telecaster telecaster is offline
Cheetah
  
Join Date: Sep 2009
Posts: 2
d630 sleep
I did a fresh install using the empire legacy boot disk, then installed 10.6.0 from a retail disk, upgraded to 10.6.4, installed chameleon and user dsdt via multibeast. (using the dsdt.aml and installing the kexts from howorang's pack.) Everything works except sleep. I've never been able to get sleep to work on any version of os x on my d630. I must have installed it a zillion times. I have i5 and i7 gigabyte desktop machines that work flawlessly---I used the IBOOT Supported disk and it's pretty automagic. I noticed that with an extra terminal attached to the d630 the lcd goes blank but the other monitor stays on when you close the clamshell of the laptop. Does anybody have x3100 graphics on a d630 and sleep works? It's a dealbreaker for me.
Reply With Quote
  #4  
Old 08-30-2010, 01:36 PM
Adrenaline1965 Adrenaline1965 is offline
Cheetah
  
Join Date: Feb 2010
Posts: 7
Quote:
Originally Posted by itry2hide View Post
I lose audio when I go to 10.6.4. I am currently running 10.6.2, RC4, and the original dell kext pack, plus most current sleep enabler. Any ideas?
For audio I'm currently using VoodooHDA.kext. Works fine for me (previously tried patched AppleHDA.kext and legacySTAC9205.kext but these did not give me any satisfaction)
Reply With Quote
  #5  
Old 09-27-2010, 05:42 PM
DieselDandy's Avatar
DieselDandy DieselDandy is offline
Cheetah
  
Join Date: Aug 2009
Location: Eire
Posts: 2
guys, just pay the USD/EUR 69 for the magic trackpad - works like charme
Reply With Quote
  #6  
Old 10-01-2010, 12:31 AM
InsanelyOne InsanelyOne is offline
Cheetah
  
Join Date: Dec 2009
Posts: 3
Could certainly use some help here. I'm not a noob, been doing the Hackintosh think for about 4 years I'd say. I was running 10.6.2 on a D630 with X3100 but had a hardware issue and am having to start from scratch. I did a vanilla install... booted into safe mode, installed the 10.6.4 combo update... then ran the X3100 installer referenced on the first post of the thread. Upon booting, my screen would just go all white (not the black screen issue obviously). I was able to do a safe boot and then I removed all of the GMAX kexts. That gets rid of the white screen issue but only does 1024x768 without CI/QE. I don't have sound either

HELP anyone? Would be greatly appreciated.
Reply With Quote
  #7  
Old 10-28-2010, 10:24 PM
mialemat mialemat is offline
Cheetah
  
Join Date: Jan 2010
Posts: 9
I got a full working Snow Leopard 10.6.4 on my Dell D630 with GMA950 embedded graphic card.
I still can't fix my cdrom drive.
It works but it is not recognized from the eject button on the menu bar.
Can someone fixed this "bug"?
Thanks in advance for your kind reply.
Reply With Quote
  #8  
Old 11-11-2010, 12:47 PM
phatt.j phatt.j is offline
Cheetah
  
Join Date: Aug 2009
Posts: 1
Kext Update Pack for D630
I am successfully working fine with last update to 10.6.5 by this pack.

http://www.mediafire.com/?e3a0yui0vd7fddg


And if system crash when pluged or unpluged usb device must replace IOUSBFamily.kext and IOUSBMassStorageClass.kext in SLE

http://www.mediafire.com/?ktzvjpccylmgo2x
Last edited by phatt.j; 11-22-2010 at 04:09 AM.
Reply With Quote
  #9  
Old 11-19-2010, 09:53 AM
Adrenaline1965 Adrenaline1965 is offline
Cheetah
  
Join Date: Feb 2010
Posts: 7
I also successfully upgraded from 10.6.4 to 10.6.5 w/o modifying anything on my current configuration:

DELL LATITUDE D830 running SL 10.6.5 with following kexts:
  • AppleACPIBatteryManager.kext
  • AppleACPIPS2Nub.kext
  • AppleBCM5751Ethernet.kext
  • ApplePS2Controller.kext
  • fakesmc.kext
  • NullCPUPowerManagement.kext
  • OSXRestart.kext
  • SleepEnabler.kext (10.6.3 version)
  • VoodooHDA.kext (removed AppleHDA.kext)
modified com.apple.Boot.plist by adding:

<key>GraphicsEnabler</key>
<string>Yes</string>

DELL 1390 WiFi module

which enabled:
  • Battery management (Battery status in menu bar is fully operational)
  • USB (mouse, external keyboard, headset,...)
  • Built in Ethernet
  • Trackpad
  • Sleep mode
  • Sound (both Output AND Input for built in speakers/mic AND external Logitech USB Headset, even the volume up/down and mute buttons are fully operational!)
  • 1920x1080x32 on external and 1680x1050x32 on the internal display. Both mirrored as extended desktop work flawlessly. Only the VGA port works (HDMI does not)
  • WiFi
Not working (yet):
  • Shut Down / Restart
Reply With Quote
  #10  
Old 01-12-2011, 08:21 AM
bridbri bridbri is offline
Cheetah
  
Join Date: May 2010
Posts: 2
anyone know how to get vga out working on d630 docking station?
Reply With Quote
Reply
Page 22 of 23 « First < 122021 22 23 >



Archive - Privacy - Top