InfiniteMac OSx86  


Reply
 
Thread tools Display modes
  #1  
Old 05-10-2012, 07:16 AM
protoss302 protoss302 is offline
Cheetah
 
Join Date: May 2012
Posts: 1
[problem]iATKOS v7 hangs at grey screen with apple after install

Hello everyones,
I used iDeneb v1.4 10.5.6 and iATKOS v7 10.5.7 both but i still get the same problem. The installation was completed just fine. The computer reboots and when it gets to the grey screen with an apple logo on it it just stray there..foreverrrrrrrrr
My PC
Mainboard: Intel D101GGC
Chipset: Intel Pentium 4 506 socket 775 LGA
Video: ATI RADEON XPRESS 200
Network: Realtek RTL8139/810x Family Fast Ethernet NIC
RAM: 768MB (Slot1: 512MB A-Data, Slot2: 256MB Kingston)

How can I fix this problem? And what's the best hackintosh build for my PC?
Please help me. Thanks!

p/s: Sorry because my english is not good!

Last edited by protoss302; 05-10-2012 at 07:24 AM.
Reply With Quote
  #2  
Old 05-10-2012, 11:30 PM
Lacedaemon's Avatar
Lacedaemon Lacedaemon is offline
Jaguar
 
Join Date: Mar 2012
Posts: 48
Hi,

When you boot up your PC, does it allow you to enter boot flags? If so, you should boot up in verbose mode and post the dump here. Also, did you install any additional drivers during install? I've found that doing a clean install has results.

Good luck,
Lacedaemon



💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers.


System Specifications
Enermax Ostrong w/ Red Trim
Gigabyte GA-Z77-D3H Rev 1.0
Mac OS X 10.8.2
6 GB Kingston 1333MHz DDR3 RAM
1 TB 5400 RPM Hard Drive
Intel Core i5 3470 3.2 GHz
ASUS ATI Radeon HD 5450 512 MB
Antec TriCool 80mm Blue LED Fan


Got AMD? Join the Cult of AMD group on OSx86.net!

Please hit the Thanks button if I helped in any way!

Acert0sh - Hackintosh for Acer PCs
Reply With Quote