 |
|
#1
01-30-2008, 07:08 AM
|
|||
|
|||
|
## Automatic notice to thread opener:
If you post this kind of message into the News Category again, your Account will be disabled I'm using rev1 dvd and trying to install. But whenever I boot into the dvd, right after it detects firewire i get this message, I never get into the GUI part of the installation, all just boot screen messages. I've tried a few different things, tried reburning the iso, using slowest speeds possible w/two different programs and verifying the burn after each instance. I've rearranged my dvd drive to different combinations of slave/master on the ide cable. I've booted with -x option, same messages. Everything I do craps out at this message. I have an M2NPV-VM mobo (6150 geforce and nforce430 w/300gig sata and 120gig IDE which I'm trying to install this to) What's going on? 
|
|
#2
01-30-2008, 11:08 AM
|
|||
|
|||
|
Alright, I got this fixed. I disconnected my SATA drive and put my IDE drive as primary master instead of secondary master. I don't know which of those two did the trick. I installed Leopard on my first of two partitions with GUID then installed efi. Only problem is that I get HFS+ partition error on boot now. Is this because the partition isn't set as primary or active? How can I do so via the installation dvd?
|
|
#3
01-30-2008, 04:14 PM
|
||||
|
||||
|
Use MBR as partition table.
2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination. My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64
|
|
#4
01-30-2008, 06:08 PM
|
|||
|
|||
|
Yes, thanks naquaada, got it fixed a little bit after I posted. All works except for lan, and qe/ci.
|
|
#5
01-30-2008, 06:08 PM
|
||||
|
||||
|
Is lan not detected or only wrong configured?
2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination. My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64
|
|
#6
02-02-2008, 11:42 PM
|
|||
|
|||
|
Hi all i have a problem when trying to boot the install dvd i get the "still waiting for root device" error
my specs: asus A8N-E 6600GT 80GB SATA 15GB ide so that everything is clear: i get that error when trying to boot the install dvd not after i installed leo.. picture:http://filebeam.com/2c736870491b126f6fce5cdef058a9a9.jpg
|
|
#7
02-03-2008, 05:08 AM
|
|||
|
|||
|
The reason I got that "still waiting for root device" is the way I had my IDE cables configured. I had to place the dvd drive on primary slave and the hard drive I was installing to on primary master. Then it was able to continue as always. Try doing it that way, kryss05, even if you're not installing to the ide hard drive and are installing to the sata. And the lan I got fixed, naquaada, only problem now is that everytime I download something, I get the you must shut down your computer now screen, and have to shut down everything.
|
(|
#9
02-04-2008, 02:51 AM
|
||||
|
||||
|
I got around this by adding -f to my startup options. I've now added it permanently to the com.apple.boot.plist
 MacBook Pro 15" | Mac OS X 10.6 • 2 GHz Intel Core Duo • 2 GB DDR2-667 • ATI Radeon Mobility X1600 128 MB • 100 GB Serial-ATA Hackintosh | Mac OS X 10.5.6 • 3 GHz AMD Athlon 64 X2 6000+ • MSI K9N AM2 • 2 GB DDR2-667 • NVIDIA GeForce 8800 GT 512 MB • ALC888 Audio • 300 GB Serial-ATA iPhone 3G • 8 GB
|
|
#10
02-04-2008, 03:35 AM
|
|||
|
|||
|
I try with option -f and sistem hangs and see message in picture!!! : http://filebeam.com/0dd242c68907c77788267b2569fc6e80.jpg
💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers.
|
Linear Mode
