iDeneb v1.3 10.5.5 problem

[Undertaker1986]

Heey guys,

I am new to this Mac on pc, But not new to Mac on a mac.
But here is my question, I had 10.5.1 and it installed fine i could activate my drive and it installed, but when i try to install iDeneb v1.3 10.5.5 on my laptop i cant activate my drive so i cant install mac on my pc, i tryed the unpatched version aswell as the patched version, it doesnt work for me, i have a "Sony vaio VGN-N31M/W" with Windows XP and 2Gig of DDR2 557 ( if i am correct ) i tryed the first aid for the harddisk but didnt helped out its a Fat 32 patition 25 gig on a 120 Gig harddisk

Can you guys help me out, cause i LOVE mac!

Greetings Jeffrey

Edit1: Ok i got it installed on my second drive with Journal format and he installed just fine, No when i restart and try to start it up the white on grey apple logo apears and stays there ans after 20 to 30 seconds a board with a stripe comes up and nothing works, Is there a way to fix this?! on -v mode it says after the 30 Seconds "Still waiting for root device" And on my laptop its the only boot os and still it doesnt work Same error as PC

[nexusmac]

you should enable AHCI or you should get the your southbridge and chipset information to get necessary kexts to reach your HDD.

[Undertaker1986]

AHCI where do i find that in the bios, And i have a intel chipset board with a AC97 soundcard. But WICH driver is a Intel chipset on that Dvd?! Cause there isnt one for that!

My specs

PC:

ASUS P5KC motherboard
Intel core 2 Quad Cpu Q6600 @ 2.4 GHz
2Gig DDR2 667
500 Gig hard disk and 250 second hard disk
512 Nvidia 8500 GT
AC 97 soundcard

Laptop

Core 2 dual T5300 at 1.73 Gig
2gig DDR2 533
120 gig harddisk
Intel graphic media accelerator 950
sound on board chip also i quess a AC97 to from Realtek

[nexusmac]

can you do your ideneb DVD with suitable kexts?


you can get information how to change kexts file in DVD.

from this link with my posts.
http://www.infinitemac.com/f5/sb700-...435/page2.html

you will need transmac trial version to read and write ideneb iso.

but you should create Extensions folder in Ideneb dvd. because it uses only mkext.

I recommend you LS8V14 drivers you can find from insanelymac forum.

it is suitable for GA-p45-* boards maybe it can support yours.

or you can search your asus board on insanelymac , your board seems popular one to run osx.

you find bios screens to change settings.

from this link

http://lifehacker.com/348653/install...cking-required


dont forget all things are experimental , it may work or not, you should try and share if it is working

to get information how to find AHCI section in bios you can also read the your mainboard manual. and you can also download from asus web site.

I hope it helps.

[Undertaker1986]

Thnx for the info i try it tommorow! On my laptop my bois doesnt show all that! is there a way to do it on Dos / Command?

[Aydinz]

"Still waiting for root device"

this is a common error and if you search here or on insanelymac there are many tutorials on how to overcome this problem

[Undertaker1986]

Originally Posted by nexusmac can you do your ideneb DVD with suitable kexts? you can get information how to change kexts file in DVD. from this link with my posts. http://www.infinitemac.com/f5/sb700-...435/page2.html you will need transmac trial version to read and write ideneb iso. but you should create Extensions folder in Ideneb dvd. because it uses only mkext. I recommend you LS8V14 drivers you can find from insanelymac forum. it is suitable for GA-p45-* boards maybe it can support yours. or you can search your asus board on insanelymac , your board seems popular one to run osx. you find bios screens to change settings. from this link http://lifehacker.com/348653/install...cking-required dont forget all things are experimental , it may work or not, you should try and share if it is working to get information how to find AHCI section in bios you can also read the your mainboard manual. and you can also download from asus web site. I hope it helps.

Maybe i am a Ass... but i cant find the driver on the site looked at Search everywhere but maybe i am blind :P I only find v12

Downloaded V12 and made a folder Extentions on the Ideneb DVD Iso but than... what do i have to put there? there are loads of maps in the downloaded V12 folder? in this pic you see whats in that map Click here what do i have to put in the Extentions map.

Edit: i got it working but i dont have sound wich driver do i need to get my on board soundcard to work on mac?! motherboard is ASUS P5KC

[nexusmac]

it seems you got working?

for sound, you should know the your soundcard chipset such as realtek ALC889.

for ALC889a, ls8v12 should have AppleHDA.kext and hdaEnabler.

for LS8v14 kext and just another example, look at this link

http://forum.insanelymac.com/index.php?showtopic=132211

for further information , use your mainboard name , chipset as search