can't burn cd's or dvd's

howarchaic · #1 11-05-2008, 07:15 AM

Installed using lawless 10.5.4
updated to 10.5.5 with the leo4all update if i remember correctly...
used eureka's appleatiata kext to increase speed (prior to upgrading any of this, i didn't have the support)
then used applehdapatcher to get sound for alc888
lastly, used nvinstaller/efi strings to get support for my 8800gt.

Last thing on my agenda is to get burning to work. Any ideas?
Info:
Biostar ta770 AMD 770 chipset with SB600 southbridge
4 gb ddr2 800
EVGA 8800 gt 512
Samsung 223q SATA dvd burner

Any suggestions would be spectacular.

howarchaic · #2 11-05-2008, 09:24 AM

From log:

Recent Contents: Finder: Burn started, Sun Nov 2 18:31:43 2008
Finder: Burning to CD-R media with SAO strategy in TSSTcorp CDDVDW SH-S223Q SB00 with generic profile via ATAPI.
Finder: Requested burn speed was max, actual burn speed is 40x.
Finder: Burn underrun protection is supported, and enabled.
Finder: Burn failed, Sun Nov 2 18:31:44 2008
Finder: Burn sense: 4/08/05 Hardware Error,
Finder: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
Finder: Burn started, Tue Nov 4 01:35:18 2008
Finder: Burning to CD-R media with SAO strategy in TSSTcorp CDDVDW SH-S223Q SB00 with generic profile via ATAPI.
Finder: Requested burn speed was max, actual burn speed is 40x.
Finder: Burn underrun protection is supported, and enabled.
Finder: Burn failed, Tue Nov 4 01:35:19 2008
Finder: Burn sense: 4/08/05 Hardware Error,
Finder: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
Finder: Burn started, Tue Nov 4 21:29:23 2008
Finder: Burning to CD-R media with SAO strategy in TSSTcorp CDDVDW SH-S223Q SB00 with generic profile via ATAPI.
Finder: Requested burn speed was max, actual burn speed is 40x.
Finder: Burn underrun protection is supported, and enabled.
Finder: Burn failed, Tue Nov 4 21:30:25 2008
Finder: Burn sense: 4/08/05 Hardware Error,
Finder: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.

CyCLoBoT · #3 11-08-2008, 10:23 PM

You wont be able to burn with SATA dvd drives at the moment. Its not supported with any versions of Leopard (Leo4All, Kalyway, Zephyroth's, lawless etc). The only workaround to this would be to purchase a SATA to IDE converter from eBay and that can get you to burn. But I had purchased a converter as well and I got the drive to recognize in Leopard but I Toast kept on crashing for some reason. So I'm back to using an IDE DVD drive.

howarchaic · #4 11-09-2008, 12:51 AM

My friend has basically the same sata drive on his Intel hack and can burn with no problems... Is this an AMD issue?

Aydinz · #5 11-09-2008, 01:33 AM

yes, im pretty sure this is an AMD issue and has to do with the kernal

milanca · #6 11-09-2008, 04:49 AM

No burning problem at all with Leo4All v3. Updated to 10.5.5 though, but i had no issues when it was originally 10.5.2, with sata dvd-rw of course.

@CyCLoBoT, can't you use your sata burner with your Leo distro? That was the only reasoni switched to Leo just to have the burning support. It's probably something related to your chipset / sata controller.

werdy · #7 01-17-2009, 11:05 AM

Similar issue with Toast 9 and Toast 10: I can erase rewritable disc but burning failed after start. SimplyBurns however works. Kernel or AppleAtiATA.kext problem?

AMD Phenom 8450
Gigabyte GA-MA790X-DS4 with SB600 chipset
OSX 10.5.6
Voodoo 1.0 kernel
Pioneer SATA drive

JFK · #8 04-19-2009, 11:20 AM

ok i have same issue. funny thing is i can use the lightscribe function with no problems.....cant burn dvdr or cdr tho..

GAH!