#1
|
|||
|
|||
Is it safe to rename my HD volume after I am done with the installation?
I heard that when installing Leopard, it is always safe to name it one word. I renamed my volume 2 words, "Macintosh HD" after the installation, or else if I did during the installation, my Hard Disk would not boot, and instead will stay at a blinking cursor before booting. Is it safe what I did even though I changed the info after the installation? Why am I unable to boot from a HD Volume that is named with two words instead of one? Why does if I change it after the installation? Lets me know, thanks. =) Trying to get this dispute out of my mind. |
#2
|
||||
|
||||
Because the script to intall bootloader can only handle a HD Volume that is named in one word ...
If your volume is Macintosh HD, the script will try to install EFI on the volume Macintosh which does not exist ... Thus rename it AFTER the installation will not change anything because EFI is not installed properly on your volume. You must reinstall. Mac OS X 10.6.3 • 2.8 GHz Intel Core I7 860 • ASUS P7P55D • 2 GB 2 Ghz DDR3 • ATI RADEON XFX 4890 1GB • 2 x Hitachi 160 GB Serial-ATA • PIONEER DVD-RW DVR-112 • LaCie Desktop Harddrive 750 GB USB |
#3
|
||||
|
||||
Ah, thats probably why I couldn't get mine to boot correctly. I formatted my HD as 'Macintosh HD' using GUID and EFI and I couldn't get the OS to boot without the DVD being in the drive. At least I know what to do now!
Cheers guys. MacBook Pro 15" | Mac OS X 10.6 • 2 GHz Intel Core Duo • 2 GB DDR2-667 • ATI Radeon Mobility X1600 128 MB • 100 GB Serial-ATA Hackintosh | Mac OS X 10.5.6 • 3 GHz AMD Athlon 64 X2 6000+ • MSI K9N AM2 • 2 GB DDR2-667 • NVIDIA GeForce 8800 GT 512 MB • ALC888 Audio • 300 GB Serial-ATA iPhone 3G • 8 GB |
#4
|
||||
|
||||
The script that installs GUID is buggy ... I've just made a fresh installation using GUID and by looking at the install log I saw that during the GUID bootloader installation there's an error saying (for me) : dd:/dev/disk2: resource busy.
Thus I must boot with the DVD too. I think I know what's the solution. I will keep you informed. Mac OS X 10.6.3 • 2.8 GHz Intel Core I7 860 • ASUS P7P55D • 2 GB 2 Ghz DDR3 • ATI RADEON XFX 4890 1GB • 2 x Hitachi 160 GB Serial-ATA • PIONEER DVD-RW DVR-112 • LaCie Desktop Harddrive 750 GB USB |
#5
|
|||
|
|||
Thanks for that info. I changed the name of the volume after the installation and everything seems to be running just fine. I didn't have to reinstall according to my understanding from your post. Thus, does that mean it is possible to change the name and the O/S is safe? Or is it strictly recommended to stick with one name? As always Zephyroth, thank you very much. ;-)
Quote:
💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. |