 |
|
#1
02-20-2008, 02:55 AM
|
|||
|
|||
|
during the install everything goes well until about 2 minutes left when the dvd has to bless the system and mount the drive and make it bootable. it doesn't make the drive bootable or mount it. whats going on? im confused. I have tried installing with kernel 9.2 and 9.1 and 9.0. This was my setup:
ToH kernel 9.2.0, AC97 audio drivers, nforce 2/3/4/5 drivers, nvinject go, broadcom wireless, forcedeth lan, x11, efi v8 for mbr. So after the install i just get "_" flashing which really is sucky. i installed with guid and got to the apple screen with the loading circle below it but thats as far as i got. 
|
|
#2
02-20-2008, 03:01 AM
|
||||
|
||||
|
I think I've found the problem.
The script can write boot0 on the first sectors of the disk only if all partitions in the installation disk are unmounted. I cannot test as I don't want to lost a dvd just for this little fix but if you want to test I can upload the file to rapidshare so that you will be able to test. Mac OS X 10.6.3 • 2.8 GHz Intel Core I7 860 • ASUS P7P55D • 2 GB 2 Ghz DDR3 • ATI RADEON XFX 4890 1GB • 2 x Hitachi 160 GB Serial-ATA • PIONEER DVD-RW DVR-112 • LaCie Desktop Harddrive 750 GB USB
|
|
#3
02-20-2008, 03:01 AM
|
|||
|
|||
|
i will test for you. thats ok with me : )
|
|
#4
02-20-2008, 03:02 AM
|
|||
|
|||
|
just let me know what i have to do... and if i have to make a new installation disk and the steps.
|
|
#5
02-20-2008, 03:03 AM
|
||||
|
||||
|
ok wait a min
Mac OS X 10.6.3 • 2.8 GHz Intel Core I7 860 • ASUS P7P55D • 2 GB 2 Ghz DDR3 • ATI RADEON XFX 4890 1GB • 2 x Hitachi 160 GB Serial-ATA • PIONEER DVD-RW DVR-112 • LaCie Desktop Harddrive 750 GB USB
|
|
#6
02-20-2008, 03:03 AM
|
|||
|
|||
|
sure thing zeph.
|
|
#7
02-20-2008, 03:05 AM
|
||||
|
||||
|
Mac OS X 10.6.3 • 2.8 GHz Intel Core I7 860 • ASUS P7P55D • 2 GB 2 Ghz DDR3 • ATI RADEON XFX 4890 1GB • 2 x Hitachi 160 GB Serial-ATA • PIONEER DVD-RW DVR-112 • LaCie Desktop Harddrive 750 GB USB
|
|
#8
02-20-2008, 03:07 AM
|
|||
|
|||
|
the os i am using right now is windows vista. but i want Leopard 10.5.2 on it. trying to do native single booting to Leopard.
|
|
#9
02-20-2008, 03:16 AM
|
||||
|
||||
|
You must edit the ISO using Transmac.
Remove FixGUID.pkg which is located in "/System/Installation/Packages/Bootloader" And replace with the one I uploaded. Mac OS X 10.6.3 • 2.8 GHz Intel Core I7 860 • ASUS P7P55D • 2 GB 2 Ghz DDR3 • ATI RADEON XFX 4890 1GB • 2 x Hitachi 160 GB Serial-ATA • PIONEER DVD-RW DVR-112 • LaCie Desktop Harddrive 750 GB USB
|
|
#10
02-20-2008, 03:19 AM
|
|||
|
|||
|
ok let me download that right now. and that works for windows correct? and then i recreate the dvd and burn it?
💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers.
|
Linear Mode
