InfiniteMac OSx86  


Reply
 
Thread tools Display modes
  #1  
Old 01-15-2008, 10:45 PM
tuyen86 tuyen86 is offline
Cheetah
  
Join Date: Jan 2008
Posts: 6
Installation freeze at :
"Darwin Kernel Version 9.1.0: Fri Nov 16 14:50:43; made by ToH:xnu-1228.0.2~1/Build/obj/RELEASE_I386"
My specs:
AMD Athlon64 3200+
80GB SATA
Geforce6100/nForce430
Reply With Quote
  #2  
Old 01-15-2008, 11:35 PM
crawle's Avatar
crawle crawle is offline
Panther
  
Join Date: Jan 2008
Posts: 246
Please post the content of the row beginning with "panic". (this problem is called a kernel panic)
And try to boot with following: "cpus=1"
Reply With Quote
  #3  
Old 01-15-2008, 11:36 PM
naquaada's Avatar
naquaada naquaada is offline
 
Join Date: Jan 2008
Location: Germany
Posts: 1,216
that's the last line. look at a line called 'debugger panic' or something like this, what is the output? GeForce.kexts and NVidiaResMan.kext are often probelms. Make a screenshot. Have you already checked the wiki?

http://osx86.wikidot.com/
2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination.

My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64
Reply With Quote
  #4  
Old 01-16-2008, 12:32 AM
tuyen86 tuyen86 is offline
Cheetah
  
Join Date: Jan 2008
Posts: 6
May be this is my problem:
http://osx86.wikidot.com/installation-support
"SAM Multimedia: read or write failed, SENSE_KEY = 0x04, ASC =0x08, ASCQ=0x03"
.."I/O error"
...
"Backtrace terminated - invalid frame pointer 0"
When i install Jas 10.4.8 amd intel sse2 sse3, installation do not recognize my ACPI platform.
Please tell me what happen! Thanks
My mainboard is ASUS A8N-VM - bios version 0702
Geforce6100/nForce410
I am sorry about my english
Reply With Quote
  #5  
Old 01-16-2008, 01:17 AM
roisoft's Avatar
roisoft roisoft is offline
 
Join Date: Jan 2008
Location: Spain
Posts: 450
Burn again the 10.5.1 iso (low speed please)
Reply With Quote
  #6  
Old 02-03-2008, 07:16 AM
tizzie01 tizzie01 is offline
Cheetah
  
Join Date: Feb 2008
Posts: 2
Hi ALL, I'm REALLY NEW to this mac thing...ALLI know is PC...

Anyhow, I have the same problem, but I burned the .iso at the lowest speed 3 times already and that same error comes up and i even tried to verify the DVD and it said it needed to be repaired, but I can't repair it....?

I'm using the Kalyway 10.5.1 Leopard.iso that has a ppf patch...is maybe the patch bad? going to try to re-burn, re-patch and install again...

1GB SDRAM
18.6GB HDD
9.31 HDD
AMD Athlon 64 3700+ 2.4GHz [SSe/SSe2 support]
MAC OSX v10.4.8


💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers.

Reply With Quote
Reply



Archive - Privacy - Top