@crimsonangel

how does it work? Would any brave soul like to try?

After installing ideneb 1.5.1 on my system when it restarts it goes to the apple screen, the wheel spins then stops and that start up music plays but the video dosent and if i click keys i hear like a chime sound in the background. I tried…

I just installed an AGP ati HD 2400 pro 512MB and I did a clean install of ideneb 1.5.1. I am able to raise the resolution to the desired setting but the system sort of lagsand QE is not enabled. also system profiler reads the card as a…

Ok I previously followed this guide on compiling a DSDT using DSDTEditor for the 1904 bios and everything worked great, However I recently upgraded the Bios to 3208, Now when I go to compile after patching it gives me errors that it isnt…

Ive been using the mac OS for over a year now on this hardware Asus A8N-SLI Nvidia 6600 AMD Athlon 3800+ X2 2 gigs ram and these operating systems on separate hard drives with chameleon RC3 Leopard Snow Leopard Windows 7 For some reason…

I ran on the ipc release of OSX a few months back but then switched back to windows and am now using windows 7. I would like to go back to OSX, but when I ran it last time I had two primary problems. 1) I had a hard enough time getting my…

I'm trying to install OSX on an old computer with a Pentium 4 processor. Every time I tried installing the ideneb 1.5.1 the boot would hang at appleintel8254XEthernet: Ethernet address then a bunch of numbers I used the Acronis boot disc…

Right now i have Nvidia 440 mx. For some reason the only distro of leopard that will install is leo4all. All other distros sort of halt at the apple loading logo and then the startup music starts to play. I was told A graphics card should…

I just installed an AGP ati HD 2400 pro 512MB and I did a clean install of ideneb 1.5.1. I am able to raise the resolution to the desired setting but the system sort of lagsand QE is not enabled. also system profiler reads the card as a…

I finally decided to go back to hackintosh on my comp. I used the ipc disc and updated to 10.5.8 using the ideneb combo update and am currently using the voodoo 9.5.0 kernel. The problems is the graphics card. The only reason I was using…

“V0.9 doesn't allow me to boot. It just goes to the apple screen with no loading. When I boot in verbose it just goes to a black screen.”

“what does this have that the qoopz 10.2.0 kernel doesn't have. I replaced qoopz with this one, and honestly couldn't tell a difference. I would like to know the difference as well”

“Hopefully someone with knowledge of this will answer, I am on many forums, with android stuff, windows 7 issues … ALL OF THEM are full of people that answer and so on, I am subscribed right now to 3 biggest forum, HAckint0sh, infinitemac an…”

“How do I apply the Diff file? I always wondered the same thing about the diff files and never used them”

“Just thought I'd throw in my 2 cents about the kernel. In the new update a new kernel is installed. What I have always done to protect myself from having the working kernel wiped was; I renamed the mach_kernel to another name such as legacy…”

“It worked for me only thing is now itunes crashes when opening, got to patch some cpuids i guess, maybe”

“@Lanceomni: I don't remember well but I think there was a problem with some kext dependencies when it was loaded from /extra, then I tried from /s/l/e and it worked, but I guess I could have studied the issue. Also I want to avoid modifying…”

“I'm using these kexts: AppleNForceATA (extra) AppleACPIPS2Nub (for my PS2 keyboard and mouse -- extra) VoodooPS2Controller (won't load from extra so it's in sys/lib/ext) Evosreboot (reboot fix, I'm searching for a no kext alternative -- ext…”

“Hey sulphide and eMatoS, I a use the same motherboard as you guys. What kexts do you use in your extra folder?”

“What disabler you mean? BTW, I am running fully vanilla, 64bit. Edit: The problem occurs only when iTunes or Quicktime is open. It is minimum, but noticeable at times. Either way I found the fix. What was the fix you used?”

“Does it fix the Sata DVD problem that Medevil's kext has?”

“The only thing i do is applying gfx string to boot plist. VGA and DVI both are working. Whitout editing vendor id 0x0142 in Geforce, NVDAN40HAL, NVDAResman kexts. I've tried to get tv-out/ s-video working but no succes yet. I've tried to ap…”

“ok I want to Update my Graphics card. what would be recommended as a guaranteed compatible AGP 8X graphics card that is quite good for under $50”

“I ran into a problem. When I installed leo4all i created a fat partition for me to install windows. I just installed windows and can no longer access the chameleon bootloader. How can I boot back into the mac partition? Edit: I got the mac …”

“Well I finally decided to give up, this isn't my computer I'm installing OSX on btw it my younger brothers. I decided to just use leo4all 4.1 and its working just fine. I do however have a few inquires. For one the graphics card, I know its…”

“Well I tried installing again this time installing the NVKush driver, I get the same results. Next I used the ipc disc but replaced the default voodoo 9.5.0 kernel used to boot with the 9.2.0 kernel used to boot the leo4all disc (voodoo 9.5…”

“Can you tell more about the videocard? like is it a Gforce 4? agp or pci-e? or are you using a quadra fx 4400? did you select andy video drivers for the system? I'm almost sure that its a NVIDIA® GeForce4 MX 440, it connects through AGP No,…”

“when i use this /sbin/mount -uw / passwd root touch /var/db/.AppleSetupDone reboot The computer reboots and still freezes at apple loading screen and the start up music sounds again EDIT: I noticed that i was typing the code incorrect after…”

“when I use "Graphics Mode"="640x480x32" it says cant find graphics”

“What Enabler are you using currently? The Natit version from that Link you posted I guess, right? Do the following: 1. Check you IOPCIMatch at Systemprofiler it's combiniton of DeviceID and VendorID 2. Go to Terminal 3. Type: sudo -s nano /…”

“I dont think much people have much experience with AGP anymore. Mostly everyone has moved on to PCI-E x16, I know I have. Are you sure that the card is QE capable? It seems like it reads the card and can use the card but the card doesnt sup…”

“A month in from what? What operating system does this happen with mostly, leopard? Not all all in windows, never in windows? If it's in leopard, have you used the 9.80 kernel? could try replacing the boot with netkas pe efi 10.5 and see wha…”

“Did you try this?..http://www.insanelymac.com/forum/index.php?showtopic=95097 or this?..mac.wares eeker.com/download/apple-imac-ati-radeon-2600-2400-1.0.1.rar/e5d42a124 I am no expert, but I hunted for some time to get my ATI card to work a…”

“which kernel do you use? and what bootloader?”

“doesn't anyone know?”

“BUMP Camon dosent anyone know? I really need help with this.”

“ca mon now some one has to know.”

“doesn't anyone know?”