@FirstHackTosh

Hallo, ich hab Leo4Allv4 installiert und den Voodoo Kernel. Wie kann ich denn da am Besten auf 10.5.6 updaten? Und welche kext muss ich den nach dem Update wieder ersetzen? Die, die mir das System unter "kextstat" anzeigt? Was hat es mit…

I will run a Phenom 9150e on OS X. The Mainboard is a Gigabyte GA-MA78GM-S2H. Which version is the best for this combo and is there support for the HD3200 IGP, I haven't a discret graphiccard. iPC, Leo4All, LawlessPPC, Zephyroth? FH P.S. I…

Which are the best options for this board? Has somebody a working iPC on a GA-MA78GM-S2H? USB2 working aswell? Any suggestions? FHT

Has anyone successfully OSX installed on a HP 2133 with VIA CPU & VIA Chrome 9 IGP? If so, which distri did you use? FMH

Is it possible that the Apple keyboard dosen't work by installing Windows? In the BIOS the keyboard worked. It also worked on the "XP recovery (F2) screen" But when a have to press enter to begin the install, the keyboard dosen't work ...…

would be cool to install four OSes: 1. MacOS X 2. Vista 3. WinXP 64bit 4. WinXP 32bit Is there somewhere a tutorial? FHT

one question, is the following possible: Dual Boot on a R500 (OSX & Windows)? And why isn't possible Bootcamp on a Hackmac? Thanks alot!

I've tried Leopard to install on a Gigabyte SB700 MB. After 50% the installation stopped. After reboot, computer stopped by "AHCI drive init" Can't get into BIOS, can't open the DVD drive, can't change boot device. What can I do now?

the system is snappy, but a couple of apps are really slow. E.g. RAR Expander, Flip4Mac. Is this a known problem and how to solve? Gigabyte SB700 MB + Phenom Quad-Core, Leo4Allv4.1 FHT

I installed LawlessPPC without a problem. But now it comes always to a beachball of death. I've seen there is a lot of wrong permissions that the disk utility can't fix. I ran the repair app several times. What is to do? How to config the…

“I'm waiting and waiting and waiting :'( On Wednesday I have to go to work again”

“Your particular SB600 chipset might not be supported. This will be fixed in IPC_PPF3. Can you give as a release date, maybe?”

“Is something known about the release date of the thrid PPF? If not, I will burn the ISO today”

“Now, the download worked ... Will arrive the thrid PPF soon? If not, I will burn today the iso”

“Insanelymac What are the benefits of the new kernel? Working USB2, maybe?”

“pcwiz, I hope you're waiting for 10.5.6 for a final release. And will this release cool & quite kext?”

“The highest resolution I can get are "1450x1050"”

“What's about the open source Linux driver from ATi?”

“I think he mean the onboard mainboard graphic. kexts for the HD3200 would be sweet QE + CI enabled”

“That's Leo4All 10.5.5. We're at 10.5.6 which may have some changes that cannot meet your requests and are beyond our control. No, it was Leo4AllV4.1 10.5.4 updated to Voodoo und 10.5.6. But on 10.5.6 I had the FW mount issue and USB2 issue.…”

“What I like to see on iPC is: - Correct processor specs shown in the System Profiler - Also in About this Mac - UBS WLAN-Adapter shown as a "Airport card" All this works right on Leo4All with voodoo kernel”

“Okay, the Finder crashes because of a incomplete german.pkg Which packages have I got to select to get a working USB2? Shutdown doesn't work at the moment. I think I have selected a wrong package. At the first time it works. Than I tried di…”

“Make sure your internal ethernet card is working or your wireless shows up as an Airport. How can I doo this? On Leo4All my USB WLAN-Adapter was shown as "AirPort" in the network preferences. On iPC it is shown as "USB-Ethernet" And every t…”

“I'm not quite sure, but is there a RT2870 Ralink driver aswell? If not -> PPF3, please”

“My system is running fine. Leo4Allv4.1 updated to 10.5.6 Chameleon Bootloader 1.0.11 (is there a newer version of it out there? Couldn't find nothing : Voodoo 9.5.0 GA-MA78GM-S2H rev v1.1 Two problems only: Firewire only works if HD is plug…”

“I have MBR and Leo4All and Voodoo doesn't work In a few days, I will change the partition table and will use Parallels for Windows.”

“VLC now works correctly. I take the seatbelt from 10.5.5 VLC only plays a black screen. I think that's because of the intgrated Radeon HD3200 (only works in VESA mode. Mounting dmgs works, too. Firewire didn't work correctly USB2 still didn…”

“Do you have also a PCGenUSBEHCI.kext in your extension folder? If yes, can you send it to me? Also the seatbelt.kext? I have still the PCGenUSBEHCI.kext faild to load error ...”

“So nfoav8or Good news First, Parallels works. It doesn't always at the first try. But it works. Replaced seatbelt, VLC doesn't work. Moved it back, doesn't work. I always rebooted the system. Is there a new version of seatbelt? USB2 problem…”

“So, it takes a couple of minutes to boot in safe mode. In verbose mode I saw yellow marked lines: Here are the kextstat: Counting on Parallels, have I understood you wright? 1. Duplicate the Voodoo kext 2. Rename the Voodoo kernel to mach k…”

“Thanks for reply I don't want to rename the Kernel. Which app do you prefer besides Parallels? Fusion? If I disable USB2 in BIOS, all USB devices run fine. I will start in safe mode, USB2 switched on. Next problem, VLC 0.8.6d, didn't work. …”

“Parallels 3 didn't work, too. I've used this guide: http://wiki.osx86project.org/wiki/index.php/Virtualization#Install_Parallels_on_AMD64 After the double-click, Parallels crashes immediately. I'm using the Voodoo-Kernel on 10.5.6”

“I updated X successfully Also reboot and shutdown works correctly USB2 doesn't :'( Should I post my system.log? Here it is:”

“Thank you very much. Now the system is booting fine. Voodoo-Kernel is also installed Problems I have now are the following: Restart and shutdown doesn't work (this works fine with the "MBR partition") USB2 problem: I tuned the EHCI-Controll…”

“I think chameleon is been installed. How can I check this? And if not, how can I reinstall it without to install X again? When I select dvd as boot device and let the countdown go by it booted with chameleon bootloader. HD is in GUID partit…”

“Okay, thanks for reply We can talk also english, no problem, I hope Have I to put the Decrypt, IntelCPUPMDisabler and AppleSMBIOSEFI kext in the extension folder before reboot? And yes, I need these kext Second, how can I be sure I am booti…”

“Results 91.66 System Info Xbench Version 1.3 System Version 10.5.6 (9G55) Physical RAM 4096 MB Model MacPro3,1 Drive Type ST3250410AS CPU Test 97.97 GCD Loop 137.06 7.22 Mops/sec Floating Point Basic 93.62 2.22 Gflop/sec vecLib FFT 67.08 2.…”

“I didn't read the whole thread, but one question. Why did they do this?”

“I have a GA-MA78GM-S2H (rev.1.1) and can't boot in AHCI-Mode, I also can't find the driver in system32/drivers What to do?”

“As it is, no. It wouldn't be a massive task to edit the actual script to work on Tiger, but you would also need to change the support files for Tiger compatible versions. And if I will use this utility with my PowerPC computers?”

“Does the OSX install disk utility work with 10.4 and below retail disks, aswell?”

“Not to my knowledge. The Efika is way underpowered for Leo anyway, not familiar with the other two. Okay, not Leo, but Tiger should running fine. Tiger on my Pismo do PowerStation von TSS (now Fixstars) has two PPC970MP in it, like the last…”

“One question: Will it be possible to install Leopard on PowerPC hardware like Efika, PowerStation or on a dualcore MPC8640D, natively?”

“second question: Now I'm searching for a MacOS X, Vista and XP compatible WLAN PCI(e) card for my FirstHackTosh Any suggestions? FHT”

“Thank you very very much! My components are arrived today. The CPU is installed well. Now I only have to wait for the case. Should arrive tomorrow C u soon”

“Which graphiccard is to prefer? It schould be: - QE/CI enabled - low cost - low power! - fanless FHT Edit: is one of these cards supported by Leopard? global.msi.com .tw/index.php?func=proddesc&prod_no=1231&maincat_no=130&cat2_no=136 global…”

“I've tried every USB fix and nothing worked so far.”

“Now I have tried several install options and can't get a working USB2 It's very frustrating”

“For me, it doesn't matter. USB isn't working on 10.5.4 aswell as 10.5.6. Waiting for iPC PPF3”

“None of the "USB fixes" does help me out. It's annoying ...”