@StealthMode

Usually when there is a lot of harddrive thrashing my mouse movement gets glitchy as heck and jumpy. ie. when Transmission is checking a file or something. I am using Zephs 10.5.2 v1 install and the new speedstep 9.2.0 kernel. AMD Opteron…

Here is what was in console after it crashed. Any ideas? I am running Zephyroths 10.5.2 install, latest NVinject and Apple Graphics updates. QE/CI is also working. AMD Opteron 165 DFI nForce4 Ultra-D 2gb G.Skill nVidia 6800GS (Q/E, C/I in…

I am running 10.5.2 Zephyroth install, everything was working till I deleted the wrong files… and had to hit the reset switch...Now I have a kernel panic an can't boot.. Here is what I am talking about.. AMD Opteron 165 DFI nForce4 Ultra-D…

Well I just finished reinstalling Zeph's 10.5.2 Rev2 and I installed the updates, but I think I might have clicked all of them. Now every time I boot it gets to the boot loader and reboots unless I boot into safe mode (-x). Which files do…

iChat in Zeph 10.5.2 Rev.2 is pretty much unusable except for seeing who is online. I can't message anyone, and when I go to Preferences/Messages the chat bubbles are missing and everything is just not working. I double click on a contact…

“I think it fixed my mouse lag when transferring large files across hd's and such. I only used the notsc flag so far. Does this mean I might actually be able to start using Leo full time?! Edit: maybe not... Might have to add the other kerne…”

“I get the 1080 error in Zephs after awhile, iChat crahses a lot. Leo4Allv3 seems pretty stable app wise, but the mouse bug is worse I think. I have a Buffalo WLI-12 wireless nic (broadcom chipset), I did not install the forcedeath kext for …”

“With idlehalt=0 and cpus=1 I am still having the mouse stuttering bug, more so when Transmission is checking data on an existing torrent. Large file transfers seem to be smoother though.. Still, the mouse movement still stutters. This is in…”

“It has to be, before I upgraded my A64 3200+ to my Opteron 165 x2 I didn't have this problem.”

“I only notice the mouse stutter bug when I am transferring large files, across HD's for instance. Otherwise everything works great. Is it something to do with the ata/sata drivers?”

“Wow, this derailed fast LOL I think I was under some influence when I wrote that”

“I too am having this issue, I was referred to this thread after I posted my own. Anyway I seem to recall having a problem where my Tiger install would lock up periodically, I was overclocked at the time (stable in XP) so I put it back to st…”

“Ok, got my 6800GS fully working. I installed the latest NVinject, then I proceeded to install Zephs Universal NVidia Installer, clicked only the new kexts, not the NVinject in the installer (note - I installed the latest NVinject already vi…”

“I was using the 9.2.0 kernel with the MBR EFI BootLoader. My problem now is I installed the Gaphics update and applied the patcher but I still get that black reboot your computer screen when i try to boot into Leo…”

“Ok,I got it working finally! MBR EFI, 9.2.0 kernel, all drivers installed for my system except the new updated nvidia kext package (wouldn't let me boot with it) Now I need to get my video card working… 6800GS”

“Ok, so I was watching the logs as I am installing (MBR EFI) and it it says Unable to copy package source file /system/installation/packages/bootloader/fixmbr.pkg/contents/archive.bom to destination etc...”

“[cite] zephyroth:You MUST check BOTH NVIDIA KEXT AND NVINJECT Every time I installed with the new Nvidia kexts and nVinject I got a black HUD before I could finish booting saying to restart in 3 languages... I am confused..”

“[cite] WinLinMac01:Hi everyone, installation went fine, and I was able to boot into the operating system with the DVD left in. However, upon taking the DVD out, I restarted and I was unable to boot back into the operating system. I tried se…”

“I installed with the MBR EFI boot loader with the new kernel, NVInject, the new video update, and my sound driver. Now when I boot up, I get half way through and a black HUD come over the screen and tells me to reboot, this will go on indef…”

“Hmmm, not sure what to tell you man, I'm sure someone has an idea though. Sorry.”

“Are you using MBR or GUID? I had a similar problem with GUID, MBR on the other hand is booting, but now I get half way through and I get a black window telling me to restart the computer…”

“http://forum.insanelymac.com/index.php?showtopic=22844 < how to set your partition active.”

“Just curious, I can't boot using GUID and the GUID EFI boot loader, I originally had a b0 error, so I made the partition active, rebooted with no b0 error, but instead it does nothing. Does GUID not work or is it just my system? AMD Opteron…”

“If this was Bestbuy we'd all look retarded…tents and all”

“Zeph said it will be uploaded to newsgroups first, then torrents.”

“I still get the blinking curser.. I remember last time I had this problem I had to keep reinstalling until I got it right... It never seems to work reinstalling the boot loader manually for me, I don't know why. I go into disk utility, my L…”

“I get a failed install on Rev2 if I install the GUID bootloader… I can't use MBR because I have a Test Install on a separate partiton, my disk is GUID so if I reformat in MBR I lose everything. Any ideas?”

“I can't seem to get past Firewire Full Secure Mode when I use modbinkernel, so far sleepkernel works the best, though I can't seem to reboot, it gets where the screen turns off and then it just hangs, so I have to hit the reset button every…”

“Got it working! Apparently all I needed was good nights sleep and I got it all sorted. Couple problems though, Restart doesn't work all the way (using the SleepKernel) I get to where the screen blacks out right before the BIOS screen pops u…”

“I install just fine, but I can't seem to boot at all. So far I get a kernel panic with speedtestkernel, modbinkernel doesn't seem to work, and the sleepkernel has IOATA Error that keeps popping up. Either way I am having problems getting in…”

“[cite] damnesiac:Hmm my guess is you tried to install the 9.2.0 kernel without efi? Not exactly. This was before there was a proper AMD update only. Oh well, I wanted to reinstall with Rev2 anyway.”

“I attempted to install the 10.5.2 update, but my comp locked up half way through and now everything is fubbered up... So I think I'll just wait till Zeph's release. I was able to get everything up an running perfect with your last image, so…”

“I'm interested in testing. I've been doing this the manual way for quite some time, but I would love to test this out.”

“[cite] crawle:Thanks StealthMode and p-J for your reports, but can you please post your system's specs? WinLinMac, what about your system, does sleep work? AMD Opteron 165 DFI nForce4 Ultra-D 2gb G.Skill nVidia 6800GS (Q/E, C/I in Tiger and…”

“I am running S1 with option # 3 and it seems to be working quite well now. Everything is still functional when it wakes up. Sweet!”

“[cite] s23osx:Kalyway version has given me no issues with this anymore, been running all weekend without a hitch. Farewell mouse bug, take your twitching with you! Seriously? I think I still have it... Which kernel are you using?”

“I'll add mine as well. After a lot of trial and error (about 15 reinstalls and two days of labor) I finally have a fully functional install. AMD Opteron 165 Dual Core DFI Ultra-D (nForce4 Ultra, ACL97 Audio, nForce LAN, Marvel LAN) 2x1gb G.…”

“I just ordered one of these. RF>IR cgi.eb ay.com/ws/eBayISAPI.dll?ViewItem&item=380006687355&ssPageName=MERC_VIC_ReBay_Pr4_PcY_BIN_Stores_IT&refitem=380002720644&itemcount=4&refwidgetloc=closed_view_item&usedrule1=CategoryProximity&refwidge…”

“I wonder if that memory leak has anything to do with the mouse movement bug. Sure would be nice if that was fixed by this update.”

“This is impressive. The mouse timing bug was my biggest complaint with Leo on my AMD x2 Opteron, course now I have an Intel rig so it isn't an issue. Course when I put together a secondary rig with my old AMD parts this will make it a hellu…”

“AMD Opteron 165 DFI nForce4 Ultra-D 2gb G.Skill nVidia 8800GT OC (Q/E, C/I in Tiger and Leo) 120gb SATA (Leo) 250GB SATA (XP) 250GB SATA (TimeMachine) 500GB SATA (Files) Buffalo Wireless NIC (Broadcom)”

“Already there Still does it. Sleep only seems to work with S1 too.”

“Cool, wish I could get mine to work 100%... Everything else seems to work except my mouse stutters when I am transferring files and the reboot problem.”

“Do you have any reboot issues? For some reason I can't restart all the way, I get to where the screen goes blank, but then it hangs, and I have to hit the reset button. I am using AppleACPIplatform 1.2.1, then I installed the one from Zeph …”

“Ok, got my 6800GS fully working. I installed the latest NVinject, then I proceeded to install Zephs Universal NVidia Installer, clicked only the new kexts, not the NVinject in the installer (note - I installed the latest NVinject already vi…”