@adrianmak

“I just tried updating bios to the latest version 1305. SL booting still slow while eSATA hdd enclosure is online and no eSATA hdd drive show up, of course. No help with updating bios version”

“I don't use eSATA but i remember an update of JMB controller in the latest bios. Did you use the latest bios version ? Also your console or boot in verbose says somenthing about that? My motherboard's bios version is 0703. Should I regenera…”

“DSDT Time machine fix: Insert this: Device (GIGE) { Name (_ADR, Zero) OperationRegion (GPIO, SystemIO, 0x0800, 0x06) Field (GPIO, ByteAcc, NoLock, Preserve) { GO01, 8, GO02, 8, GO03, 8, GO04, 8, GO05, 8, GP9, 1 } Name (_PRW, Package (0x02) …”

“Many thanks all of you from this post. I have an annoying minor problem starting from using leopard. The Asus P5K-E wifi/ap has two eSATA ports which controlled by jmicro controller. One of the eSATA port is connected to an HDD enclosure. I…”

“anyone with asus p5k-e wifi-ap motherboard, tried time machine ? with the on-board network card work with time machine ?”

“Edit AppleSystemInfo.strings that is located at /System/Library/CoreServices/Resources/English.lproj/. Edit UnknownCPUKind Is there any injector kext or EFI String instead of editing Apple original kext ?”

“Last but not the least. In About this mac, my CPU shown as unknow how to show it correctly? Mine cpu is Q6600 core 2 Quad Thx Snoc posted jmico kext on #191 to show properly in system profiler.”

“I'm by no means and expert. I managed to get my install working by using all the information in this thread. One thing I would say, I doubt you will have much luck using other people's dsdt.aml files. I would suggest the following: 1. Gener…”

“did the onboard sata port shown as Intel ESB2 AHCI instead of ICH9R (something like that which shown in Leopard 10.5.x) ?”

“is the ADI988b.Fix.kext work on both 32 and 64bit kernel boot ? Besides, are you guys with Asus P5K-E wifi/ap motherboard, under the Serial-ATA of System profiler my information of Serial-ATA shown like this is it shown correctly ? The jmic…”

“Confirmed that the AppleYukon2Injector.kext posted on #181 is worked. Just put it under /E/E and reboot with -f”

“This is a new AppleYukon2Injector.kext with DHCP Fixed (based on OG-Phantom's AppleYukon2Injector.kext) kind regards, Snoc Thx! I'll try this one later on even network is now working fine by editing the plist directly. Beside, My display ca…”

“my display card not fully work. my display card XFX Nvidia 8800GT 512MB I used Universal OSx86 Installer 1.2 to generate EFI String. i checked "Apply EFI String for video card" and the video card I selected is "NVIDIA GeForce 8800GT 512MB" …”

“any one provided a DSDT.aml file with all fix including audo fix and SATA ESB2 fix ?”

“Yes that one .Did you booted with -f option ? Did you check your SystemProfiler/Extensions to see if AppleYukon.kext is loaded ? Did you tried to load and unload the kext manually ? Did you replugged your LAN Cable? I edited the Info.plist …”

“Did you tried the other method also ? What other method ? Edit AppleYukon2.kext's info.plist directly ? i.e System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2.kext/Contents/Info.plist”

“I'm using the same motherboard p5k-e wifi/ap. I installed SL and boot into desktopsuccessfully. Then I extract attached file AppleYukon2Injector.kext.zip posted from 1st post and put under /Extra/Extensions/ and reboot Now, SL can recgonize…”

“for display card, I prefer EFI string instead of putting in dsdt file.”