技嘉 Gigabyte G31M-ES2L 底板 Leopard 零售版（Boot-132 + 隱藏 EFI 分割區）完整安裝教學
使用 Boot-132 開機光碟與 Apple 原廠 Leopard 零售版 DVD 在技嘉 G31M-ES2L 底板上部署零修改原生系統（Vanilla），並將 Chameleon 2.0 與 Extra 驅動安裝於 200MB 隱藏 EFI 分割區的經典教學。
- 主筆作者
-
@Voyn1x
發表於 2009-06-20
- 所屬專區
- OSx86 10.X 核心架構與安裝配置
- 典藏規模與紀錄
- 669,898 次歷史閱讀 · 74 則精選技術筆記（萃取自 80 則原始回帖） · 2009-06-20 – 2011-12-31
- 參與貢獻成員 (49)
- @sk1nhd33t (8)@mecanoiz (5)@ju421019 (5)@Voyn1x (4)@lewson (3)@JoQ (3)@Ricky87 (3)@drbee (2)@Ianxxx (2)@arsonwells (2)@drossxyu (2)@yabadabadol (2)@353inf (2)@bobble666 (2)@milanca@cRuNciE+33 more
- 相關硬件參考
- USB 3.2 Boot Flash Drives ↗ Gigabyte Motherboards ↗ Mac USB Audio DACs ↗
事前準備
- 一張 Apple 原廠 Mac OS X Leopard 零售版安裝光碟（Retail DVD）
- 一張空白 CD 光碟（用於燒錄 Boot-132 引導光碟）
- 一部可燒錄 ISO 的電腦，以及一隻存放安裝後工具的 USB 手指
- 一隻目標安裝硬碟
採用零售版（Retail）原生安裝相較於整合修改版（iPC、iATKOS、iDeneb、Kalyway、JaS 等）的三大優勢：
- 可隨時放心使用系統內置的「軟件更新」（Apple Software Update）直接升級
- 100% 原生未修改的 OS X 系統檔案，穩定度與真機無異
- 所有底板專屬修補均隔離於 200MB 隱藏 EFI 分割區，主系統保持純淨
STEP 1 // 下載所需檔案
將隨附的 Boot132-G31M-ES2L.iso（mega upload.com/?d=A9PGA820，6.47 MB）燒錄至空白 CD，並下載 Chameleon 2.0 r431、OSx86Tools 及 TextMate 存入 USB 手指。隨附的 Extra 資料夾內已預備針對 G31M-ES2L 修補好的 dsdt.aml、HDAEnabler.kext、VoodooPower.kext（啟用 SpeedStep 與關機重啟修正）及 IOUSBFamily.kext（防止睡眠時 USB 磁碟意外卸載）。
STEP 2 // 由 Boot-132 引導零售版安裝光碟
放入剛燒錄好的 Boot-132 CD 開機，待 ISOLINUX Loader 載入完畢後，取出 Boot CD 並換入 Apple Leopard 零售版 DVD。當畫面出現 BOOT 字樣並識別光碟後，按 Enter 即可啟動零售版安裝程式。
STEP 3 & 4 // 使用磁碟工具程式格式化硬碟並安裝
選擇語言後，從頂部選單開啟「工具程式」›「磁碟工具程式」。點選目標硬碟，進入「分割」頁籤，將卷宗架構設為「1 個分割區」，點擊下方「選項」並選擇 「GUID 分割區表格（GPT）」（此步極為關鍵！），套用並格式化為 HFS+（Mac OS 擴充格式・日誌式）。隨後關閉磁碟工具程式，可於「自訂」取消勾選多餘語言包與 X11 以縮短安裝時間，接著開始安裝。
STEP 5 & 6 // 首次開機並將引導程式寫入 200MB 隱藏 EFI 分割區
安裝完成後，再次使用 Boot-132 CD 開機，在提示符下按 Enter 並輸入硬碟代號 80（第一隻硬碟）或 81（第二隻硬碟）進入桌面。正如有名的 Munky 方法所述：
當你在「磁碟工具程式」將硬碟格式化為 GPT（GUID 分割區表格）時，系統必定會在磁碟最前端自動建立一個 200MB 的隱藏 EFI 分割區。將 Chameleon 與 Extra 放入該隱藏分割區，即可讓主系統分割區保持 100% 原廠未修改狀態！
執行 Chameleon 安裝器，在點擊安裝前按左下角「自訂（Customize）」並勾選 Chameleon EFI HFS。接著雙擊執行隨附的 EFI Partition Mounter 腳本，根據畫面列出的磁碟編號（例如 disk0）：
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *931.5 Gi disk0
1: EFI 200.0 Mi disk0s1
2: Apple_HFS Vanilla 931.1 Gi disk0s2掛載 EFI 分割區後，將其中的 Extra 資料夾替換為隨附的 G31M-ES2L 專用 Extra 資料夾。至於 Realtek ALC883 內置音效，只需使用 OSx86Tools 將 AppleAzaliaAudio.kext 安裝至 /System/Library/Extensions 即可。
STEP 7 & 8 // 注入顯示卡 EFI 字串與 Apple 軟件更新
打開 OSx86Tools 內置的 GFX String Creator 產生你顯示卡的十六進制 EFI 字串，並貼入 EFI 分割區 /Extra/com.apple.Boot.plist 的 device-properties 欄位。儲存後取出光碟重新開機，即可直接透過「軟件更新」放心升級至最新版本的原生 Leopard！
社群實測與技術補充筆記
自 80 則原始討論回帖中萃取 74 則高價值技術回應
超讚的教學指南，多謝分享！我只遇到一個小問題：裝了你附的 USB Kext 後我的 USB 埠反而不能用了；不過把它刪掉後就恢復正常了（當然也就少了睡眠喚醒不卸載的功能）……
@drbee超讚的教學指南，多謝分享！我只遇到一個小問題：裝了你附的 USB Kext 後我的 USB 埠反而不能用了；不過把它刪掉後就恢復正常了（當然也就少了睡眠喚醒不卸載的功能）……
啊，隨附的 IOUSBFamily.kext 是針對 10.5.7 版本的，等你把系統升級到 10.5.7 後就能正常運作了！
@Voyn1x 以及各位照這篇教學安裝的朋友：請問你們在 10.5.7 下「自動睡眠（Auto Sleep）」功能正常嗎？我這邊手動從左上角蘋果選單點「睡眠」完全正常，但在「系統偏好設定」裡設定閒置定時自動睡眠卻不會生效。我用的是同一塊底板但採用另一種方法裝零售版，如果這篇的方法能讓自動睡眠正常運作我就改用這套。
多謝回覆！
@drbee超讚的教學指南，多謝分享！我只遇到一個小問題：裝了你附的 USB Kext 後我的 USB 埠反而不能用了；不過把它刪掉後就恢復正常了（當然也就少了睡眠喚醒不卸載的功能）……
為什麼原生 USB Kext 會有睡眠喚醒問題？我在 GA-G31M-S2L 上用原生 USB Kext 喚醒完全正常啊，
我以為所有 ICH7 南橋底板都沒這問題？
@sk1nhd33t@Voyn1x 以及各位照這篇教學安裝的朋友：請問你們在 10.5.7 下「自動睡眠（Auto Sleep）」功能正常嗎？我這邊手動從左上角蘋果選單點「睡眠」完全正常，但在「系統偏好設定」裡設定閒置定時自動睡眠卻不會生效。我用的是同一塊底板但採用另一種方法裝零售版，如果這篇的方法能讓自動睡眠正常運作我就改用這套。多謝……
不，我這塊底板在 10.5.7 下「定時自動睡眠」一樣不會觸發（印象中在 10.5.6 時是正常的）。其實不少白果真機用戶也回報在升級 10.5.7 後遇到同樣的問題，希望 Apple 會在下一次系統更新中修復。
@Ianxxx為什麼原生 USB Kext 會有睡眠喚醒問題？我在 GA-G31M-S2L 上用原生 USB Kext 喚醒完全正常啊，我以為所有 ICH7 南橋底板都沒這問題？
如果 drbee 指的是睡眠喚醒後 USB 裝置無法識別，我這邊並沒有遇到這個狀況；我真正遇到的問題是：所有接在 USB EHCI 控制器上的高速裝置都被系統視為「非內置（Not Built-in）」，導致進入睡眠時會被強制斷電卸載，喚醒後桌面就會跳出「磁碟未正常退出」的警告視窗。
目前我找到唯一的解決方法是換用 Slice 修改過的 IOUSBFamily.kext。我相信應該也能透過修改 DSDT 來完美修正，只是我還沒研究出具體改法。
我之前已經用 iATKOS 10.5.7 裝好系統了，包括睡眠與關機在內的所有功能都正常，唯獨按「重新開機（Reboot）」時會停在黑畫面不會重啟？
另外請問 DSDT.aml 檔案具體有什麼作用？我需要靠它來修復重啟問題嗎？
還有關於音效方面：我的類比喇叭輸出正常，但 S/PDIF 數碼輸出沒有反應，請問你們也是這樣嗎？
要解決重新開機卡黑畫面的問題，你只需要安裝 Extra.zip 裡面附帶的 OpenHaltRestart.kext 即可。
壓縮包內的 dsdt.aml 則已經打好相關修補補丁：除了能讓你在不裝 IntelCPUPMDisabler 的情況下直接原生開機，還能修正 Time Machine 備份問題，並一併消除「系統監視程式（Console）」裡的 UUID 35 報錯。
關於 DSDT 的更多技術細節可以參考論壇專帖。
至於 S/PDIF 數碼光纖/同軸輸出我自己還沒實測過，不過我目前已經改用 DSDT 修補搭配純 plist 注入（Plist-only Injector）來驅動原生 AppleHDA 音效了。因為開機時還會跳出幾行 Sound Assertion 警告訊息（所以暫時還沒放進主帖教學裡），但如果你有興趣試試看，隨時告訴我！
感謝分享這篇教學！我稍早切了一個 80GB 分割區照著實測，果然如預期般順利運作！不過在測試過程中發現幾個問題，想請教大家：
我的測試平台是 Core 2 Quad Q8200（預設 2.33GHz 未超頻），由 10.5.6 零售版 DVD 安裝並透過 Combo Update 升級至 10.5.7。
1. 裝上隨附的 VoodooPower.kext 後，用 Temperature Monitor 監測到的 CPU 溫度反而高出 10°C（不裝時輕載約 40–42°C，載入後卻飆到 50°C 以上；換試 VoodooPowerMini.kext 也一樣）。所以我暫時先把它移除了，但這樣就少了 SpeedStep 自動降頻功能。
2. 這個安裝方法會自動把我的處理器超頻嗎？現在「關於本機」裡面顯示的時脈從原本的 2.33GHz 變成了 2.43GHz。
3. 開機紀錄裡出現下面這行報錯需要擔心嗎？有沒有修正方法，還是屬於正常現象？
kernel ACPI_SMC_PlatformPlugin::getCPU_PSSData - _PSS evaluation failed
4. 我剛買了一把新款 Apple 鋁合金薄型鍵盤（無數字鍵盤短版），請問電腦進入睡眠後無法按這把鋁合金鍵盤喚醒是正常的嗎？我換接其他一般 USB 鍵盤隨便按個鍵就能喚醒。我在 Console 裡看到下面這行訊息，不確定是不是原因所在：
kernel Extension "com.apple.driver.AppleHIDKeyboard" has no explicit kernel dependency; using version 6.0.
5. IOUSBFamily.kext：裝上隨附的修改版 Kext 後確實解決了睡眠時 USB 手指異常退出的問題，但卻導致開機時抓不到我的 USB 藍牙接收器（Bluetooth Dongle），所以我只好先還原回原版。正在尋找兩全其美的解法。
再次感謝任何回覆以及這篇超實用的指南，對我們這些新手幫助太大了！
極佳的教學指南！
Voyn1x — 這篇教學寫得太棒了，幫我在極短時間內就把 G31M-ES2L 主機裝好 10.5.7 並穩定跑起來！順便分享兩點實測心得：
- 我將你的指南與 InsanelyMac 這篇教學 ↗ 結合，成功用兩隻 1TB 硬碟組成 Apple 軟件 RAID-0 陣列並直接引導開機！
- 你
Extra資料夾內附帶的修改版IOUSBFamily.kext會導致 VMware Fusion 安裝到最後一步時報錯（提示postflight script執行失敗）。只要先移除該 Kext、重新執行 VMware 安裝包內的腳本即可順利解決。現在除了睡眠喚醒後 USB 需重插之外，一切完美運作。
再次感謝！
我照這篇教學在 G31M-ES2L 底板上安裝了零售版 OS X 10.5.7，並用 Chameleon 從隱藏 EFI 分割區載入 Kext，除了 AirTunes 之外所有功能都正常運作。
我可以 ping 通我的 AirPort Express 基地台，但「AirPort 工具程式」與 iTunes 卻都搜尋不到它。
我已經試過重啟 AFP 與 Bonjour 背景服務，也先後換試過 RealtekR1000 與 RTL8169 等多款網卡 Kext。這塊底板的整體相容性比我舊的華碩 P5K-E/WiFi 好太多了，但因為我的音響擴大機離電腦太遠、又沒辦法拉明線穿過客廳，所以非常依賴 AirTunes 功能。
@mecanoiz我照這篇教學在 G31M-ES2L 底板上安裝了零售版 OS X 10.5.7，並用 Chameleon 從隱藏 EFI 分割區載入 Kext，除了 AirTunes 之外所有功能都正常運作。我可以 ping 通我的 AirPort Express 基地台，但「AirPort 工具程式」與 iTunes 卻都搜尋不到它。試過重啟 AFP 與 Bonjour 背景服務……
去 Google 搜尋一下 Psystar 釋出的 RealtekR1000.kext 吧！我裝了那一版之後，Time Capsule 跟「AirPort 工具程式」在我的機器上都完美運作。
我想到一個可以做到「100% 純原生（Full Vanilla，連 /S/L/E 都完全不碰）」的點子，有人要試試看嗎？
把 VoodooHDA.kext 連同從 /System/Library/Extensions 複製出來的 IOAudioFamily.kext 與 OSvKernDSPLib.kext 一起放進 EFI 分割區的 /Extra/Extensions 裡，這樣主系統就徹頭徹尾保持原廠狀態了！
@sk1nhd33t去 Google 搜尋一下 Psystar 釋出的 RealtekR1000.kext 吧！我裝了那一版之後，Time Capsule 跟「AirPort 工具程式」在我的機器上都完美運作。
我試過換用 Psystar 版的 Kext 了，但還是沒成功。
我用「網絡工具程式」掃描了 AirPort Express 的連接埠，可以掃到 53 domain、5000 commplex-main、5009 winfs 與 10000 ndmp。之前在 InsanelyMac 爬文看到有人遇到 AirTunes 抓不到的問題是靠換裝特定版本網卡驅動解決的。
我也試過直接將 Realtek 官方驅動安裝包灌進 OS X 主系統分割區。
請問有人手頭有上述驅動的舊版本嗎？或者知道還需要啟動哪個系統服務才能讓 AirTunes 與 iPhone Remote 遙控功能正常連線？
@lewson我想到一個可以做到「100% 純原生（Full Vanilla，連 /S/L/E 都完全不碰）」的點子，有人要試試看嗎？把 VoodooHDA.kext 連同從 /System/Library/Extensions 複製出來的 IOAudioFamily.kext 與 OSvKernDSPLib.kext 一起放進 EFI 分割區的 /Extra/Extensions 裡……
我之前在 EP45 底板的討論串看過有人這樣做，相信在我們的 G31M 上肯定也行得通！現在的問題是：針對我們板載的 ALC883 音效晶片，到底哪套音效驅動方案品質最好？也許板上的老鳥可以指點一下。我自己實測過能正常發聲的有以下三種：
1. AppleAzaliaAudio + HDAEnabler
2. ALCinject + AppleHDA
3. VoodooHDA
@mecanoiz我試過換用 Psystar 版的 Kext 了，但還是沒成功。我用「網絡工具程式」掃描了 AirPort Express 的連接埠，可以掃到 53 domain、5000 commplex-main、5009 winfs 與 10000 ndmp。之前在 InsanelyMac 爬文看到有人遇到 AirTunes 抓不到的問題是靠換裝特定版本網卡驅動解決的……
老兄，真遺憾這問題困擾你這麼久，我這邊確實完全正常。建議你試著把 RealtekR1000.kext 直接放進 /System/Library/Extensions（/S/L/E）；如果你堅持放在 /Extra/Extensions，則需要把 IONetworkingFamily.kext 跟 IOPCIFamily.kext 也一併複製到 /Extra/Extensions 裡讓它能順利解決依賴關係。
如果還是不行，或許得考慮乾脆重灌一次乾淨的 Leopard 了。
@sk1nhd33t老兄，真遺憾這問題困擾你這麼久，我這邊確實完全正常。建議你試著把 RealtekR1000.kext 直接放進 /System/Library/Extensions（/S/L/E）；如果你堅持放在 /Extra/Extensions，則需要把 IONetworkingFamily.kext 跟 IOPCIFamily.kext 也一併複製到 /Extra/Extensions 裡……
把 RealtekR1000.kext 放進 /S/L/E 後立刻就成功抓到 AirTunes 了！萬分感謝！
不過有人知道為什麼這個 Kext 放在隱藏 EFI 分割區裡會無法完整載入嗎？
今天剛下單訂了這塊底板！
不得不說這篇教學寫得真好。不過我有一個疑問：
我看底板說明書上寫著，機背的三個音效孔（綠色 Line-Out、藍色 Line-In、粉紅色 Mic）可以透過驅動設定切換為 5.1 聲道輸出（在 Windows XP 的驅動控制面板裡可以把三個孔全部設為音源輸出，插上三條音源線就能輸出 5.1 環繞聲）。
請問在 OS X 下也有機會實現這種三孔 5.1 聲道輸出嗎？
如果可以的話就太讚了！
各位好，我又來請教了。為了搞定 5.1 聲道輸出我試遍了各種辦法，請問這塊板子在 OS X 下真的能開 5.1 嗎？
你們目前都用哪一個音效 Kext？
如果機背那三個類比音源孔沒辦法切換成 5.1 輸出，那我去買一塊連接底板 S/PDIF 針腳的子卡轉接頭，能透過 S/PDIF 數碼輸出 5.1 嗎？
先謝過大家！
我檢查過「音訊 MIDI 設定（Audio MIDI Setup）」，裡面完全不讓我調整多聲道輸出配置；不過我接上底板的 S/PDIF 輸出確實是有聲音訊號的。
10.5.8 官方更新釋出了！我直接升級後一切正常，只需要在更新完後重新安裝一次音效 Kext 並重開機即可。
補充：閒置自動睡眠依然不會觸發。
KVM 切換器下的鍵盤與滑鼠問題
嗨，我照著這篇教學順利裝好系統，但透過 KVM 切換器連接時卻遇到鍵盤無法識別的問題（滑鼠則是直接插 USB 才避開問題）。在我稍早升級到 10.5.8 之前鍵盤原本是完全正常的，請問有人知道怎麼解決嗎？可以的話我真的很希望能繼續透過 KVM 切換器使用。
除此之外系統其他部分都棒極了……能夠毫無恐懼地直接點選線上「軟件更新」，以前哪敢想像這種事？多謝！
不確定這資訊對大家有沒有幫助：在 10.5.8 下，就算不裝 HDAEnabler.kext 音效依然能正常運作！我剛剛做了一個新的備份系統安裝，結果忘了放 HDAEnabler.kext，沒想到開機時聽到 Leopard 歡迎動畫竟然直接有聲音！
再次感謝 Voyn1x 的精彩教學……我現在唯一的小困擾是，因為原生的 AppleIntelCPUPowerManagement.kext 正常載入運作，我的 CPU 溫度比之前高了 10°C 左右。
@sk1nhd33t老兄，真遺憾這問題困擾你這麼久，我這邊確實完全正常。建議你試著把 RealtekR1000.kext 直接放進 /System/Library/Extensions（/S/L/E）；如果你堅持放在 /Extra/Extensions，則需要把 IONetworkingFamily.kext 跟 IOPCIFamily.kext 也一併複製到 /Extra/Extensions 裡
@mecanoiz把 RealtekR1000.kext 放進 /S/L/E 後立刻就成功抓到 AirTunes 了！萬分感謝！不過有人知道為什麼這個 Kext 放在隱藏 EFI 分割區裡會無法完整載入嗎？
你有試過我上面引文提到的做法（把 IONetworkingFamily 與 IOPCIFamily 一併放進 /Extra/Extensions）嗎？在我的機器上連 10.5.8 用這招都能從 EFI 分割區完美載入喔！
（抱歉把 Kext 名稱標得五顏六色的 ^_^）
請問只有我一個人在跑 BT 軟件時會出問題嗎？每次我打開像 Transmission 這類 BT 軟件，滑鼠就會立刻變成轉個不停的彩球（Beach Ball），點哪裡都完全沒反應。真的超煩人，為什麼會這樣呢？
我之前在這塊底板上裝過一次零售版，在升級到 10.5.8 之前一直都好好的，結果一升上 10.5.8 有線網卡就直接掛點。於是我備份好資料重灌回 10.5.7，現在其他功能都恢復正常了，唯獨內置有線網卡（NIC）在「網絡偏好設定」裡一直顯示「未插上網絡線（Cable Unplugged）」，而我連接的路由器正面三顆燈號則是每隔 3 秒鐘就會同時閃爍一次。我已經把 RealtekR1000.kext 同時放進 /S/L/E 以及 EFI 分割區的 /Extra 資料夾裡了，依然毫無動靜。請問還有什麼辦法可以救，還是網卡硬體真的燒壞了？
Intel Core 2 Quad Q9400 2.66GHz (FSB 1333) 問題
嗨，
系統安裝過程一切順利，但重啟不斷電的問題一直沒修好，而且 OS X 把我的 2.66GHz CPU 誤判成 4GHz，錯誤日誌裡也提示 CPU 相關問題（不過用 Boot-132 光碟引導開機倒是正常的）。
請問有人知道怎麼調整嗎？
rab
請問有人打算為這塊底板寫一篇 Snow Leopard 的安裝教學嗎？有的話就太感激了！
Cheers, Zy
舉雙手贊成，如果能有這塊底板的 Snow Leopard 專屬教學就太棒了！我今天照著 teknojunkie.com 的教學嘗試安裝，結果在設定初始註冊資訊的畫面直接跳出「你需要重新啟動電腦（Kernel Panic）」的五國死機畫面。
我剛剛私訊了另一位成功在這塊底板上跑起 Snow Leopard 的網友，如果我也測試成功，一定馬上回來跟大家分享具體步驟。
我是可以寫一篇教學啦，不過一來 Snow Leopard 還沒正式上市，二來除了 VoodooHDA 之外目前還在等更完善的 64 位元音效 Kext……我現在暫時用原版 AppleHDA 搭配 LegacyHDA（放在 /E/E），雖然聲音輸出正常，但調整音量時沒有「啵啵」的提示音回饋。
而且我也稱不上什麼專家，或許還是等板上的前輩高人發佈正式指南，我們跟著做比較穩妥。
如果你願意寫一篇分享就太讚了！畢竟就算目前的 GM 版還不算最終零售版，實際安裝步驟應該也八九不離十吧？
總之我剛剛照你提到的 Kext 清單（扣掉 VoodooHDA）又重新試裝了一次，結果這次連白蘋果畫面都過不去，底下的風火輪就一直無止盡地轉圈：
dsmosNullCPUPowerManagementOpenHaltRestartPlatformUUIDAppleDecrypt
據我所知我放的這些全都是 64 位元版本，實在搞不懂我是哪裡做錯了（另外你能同時放 dsmos 跟 AppleDecrypt 兩個解密驅動嗎？通常只選一個或改用 fakesmc）。
我還沒為 DSDT 打 CMOS 重置修正補丁（還沒搞懂怎麼改），但照我爬文的說法，就算沒打 CMOS 補丁應該也還是能開機才對。
我已經寫好一篇專文發在 這裡（G31M-ES2L 零售版 Snow Leopard DVD 安裝指南）→，反覆測試過幾次都完美運作！
完整原生 64 位元運作，而且 /System/Library/Extensions（/S/L/E）完全零修改！
我想我找到 10.5.7 以上版本無法自動睡眠的元兇了：你必須停用或移除 Paragon NTFS 驅動程式！
在第二步換片引導時卡關
請問有人願意幫幫忙嗎？我拍了一段 YouTube 影片展示我遇到的狀況。
底板：Gigabyte G31M-ES2L
處理器：Intel Pentium D（也換試過 Pentium 4 630）
記憶體：2GB DDR2 800MHz
磁碟機：IDE 硬碟與 IDE DVD 光碟機接在同一條排線上（硬碟為 Master，DVD 為 Slave）
顯示卡：NVIDIA Quadro FX（PCI Express）
我先用 Boot-132 光碟開機，接著換入 10.5.6 零售版 DVD（在 PC 上用 TransMac 燒錄的備份片），結果按 Enter 後電腦就直接自動重啟了，加上 -v 參數也一樣重啟（註：Pentium 4 / Pentium D 處理器在 Leopard 下無法直接執行原廠 Vanilla 核心，需搭配 Voodoo 等修補核心）。
我爬了大量的文章，但可能因為看了太多不同來源的說法，腦袋已經徹底亂成一團了。
我訂的這塊底板還沒寄到，想先請問一下：你附件裡提供的 dsdt.aml 可以直接拿來在我的機器上用嗎？還是必須針對我自己的 CPU 重新反組譯並編譯一次？
非常感謝這篇教學指南，寫得太棒了！
隨附打包好的檔案加上那個隱藏 EFI 分割區掛載腳本，讓整個安裝過程輕鬆無痛。
我是把原本裝在 Intel D945GCLF2 小板上的硬碟拆過來，直接用這套工具更新配置以適配這塊新底板。
期間唯一遇到的問題是沒有聲音（大概是因為我原本的 10.5.6 系統裡殘留了一些舊驅動）。後來我把 EFI 分割區與 /S/L/E 裡的 HDAEnabler 刪掉，只在 /S/L/E 保留 AppleAzaliaAudio.kext 與原版 AppleHDA.kext，機背的耳機孔就順利出聲了，在「聲音偏好設定」裡顯示為「HD Audio Output」裝置。
目前為止我非常喜歡這塊底板！我訂的獨立顯示卡還沒到貨，但目前單靠內置顯示晶片，邊打這篇回帖邊看插座上的功耗計居然只有 35W，就算把 CPU 跑滿載峰值也才 70W，看來我那顆 120W 的 PicoPSU 迷你電源供應器完全應付得來！（我組機最看重的就是低噪音與低發熱。）
下一步準備挑戰 Snow Leopard！
我的配置：
底板：GA-G31M-ES2L
處理器：Pentium Dual-Core E6300 2.80 GHz (SLGU9)
硬碟：Samsung HD502HI 500GB（單碟 EcoGreen 節能硬碟）
電源：PicoPSU-120WI
補充更新：
後來插上獨立顯示卡（GeForce 7300 GT 256MB）並開啟高解像度後，待機功耗增加了大約 15W 左右，好吧……
展開其餘 41 則社群技術筆記完整歷史討論紀錄
Ar8131
I was going to post a bunch of crap, but i'll save it for a thread elsewhere.
The bottom line question, has anyone worked with Rev. 2 of this board? I'm about to buy all of my hardware. I am left to assume I will most likely receive rev2 which has the AR8131 LAN. I don't want to buy a different NIC to make ethernet work, or I'd rather just buy a different motherboard.
Anyone know if there is a workable driver for this new chip? Thanks.
I got "Invalid Argument" error when I tried to execute the EFI-Partition-Mounter script ... help ... seems that I'm missing something in mount_hfs command line but not sure what ... tkx!
Legacy Audio ALC883
For all of you using the Gigabyte GA-G31M-ES2L, I have been running this board for awhile. Attached is legacy audio for Leopard and Snow Leopard and some tools. In the zip is a folder called HDA, in that folder is 2 other folders, one for Leopard and one for Snow Leopard and 1 file dsdt.aml. You can use either the dsdt.aml or the HDAEnabler.kext (don't use both) along with the HDA.kext. I use the dsdt.aml for my sound which just injects audio information (layout-id, and pin configurations) and the HDA.kexts injects the proper layout information for your on-board audio to work. HDAEnabler.kext does the same thing as dsdt.aml, it just injects it in a different place in the IORegistry. put the dsdt.aml file in /Extra and the HDA.kext and HDAEnabler.kext (only if you don't want to use my dsdt.aml file) in /Extra/Extensions. rebuild the /Extra/Extensions.mkext using MKextTool and reboot if your using leopard. if your using Snow Leopard, follow the above directions except run Kext Utility app in the tools folder instead of MKextTool and then reboot. You should now have line out, front headphones, line in and mic working. Don't forget to remove all of your other sound kexts (AppleAzailia, Voodoo etc. before you run Kext Utility).
I just finished building a machine based off the G31M-ES2L and have since discovered that it's a rev. 2, which as many of you know uses a different incompatible brand for the ethernet port. What are the chances this is eventually going to be fixed via software? Initially I had planned to use wireless anyway, but the Rosewill RNX-EasyN1 WI-FI dongle that was recommended to me is painfully slow (perhaps it only has a short range). Could someone recommend another solution that works well ( In both windows 7 and OSx), preferably a USB dongle of some sort, as the space for a PCI card is extremely limited.
Use wi fire
its amazyng cheap and works perfect for desktop
enga dget.com/2009/09/02/wi-fire-long-range-wifi-adapter-hands-on-and-impressions/
For some reason the EFI partition never mounts after I run your script. I get this error: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
I've tried following this guide ↗ and this guide ↗ as well, but for reasons I assume relate to my Rev. 2 I cannot get my MAC address. If I got into network settings there isn't an ethernet card listed.
Right now i'm booting into SL via chameleon on a usb thumb drive. Has anyone had any luck with this
I'm in the same situation, and when I enter in "1" for my EFI partition it asks for a password, I never set a password when creating the account at login.
I have a Rev 1 board.
Any help.
@drossxyuFor some reason the EFI partition never mounts after I run your script. I get this error: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35 I've tried following this guide (http://forum.netkas.org/index.php/topic,83.0.html ↗) and this guide (http://forum.voodooprojects.org/index.php?topic=250.0 ↗) as well, but for reasons…
But in my scenario - I can connect to the internet, any help with my situation, when i enter in '1' it asks for a password, whats the password.
I solved that part that I posted two posts above, by creating a password and mounting the EFI, that resolved that Issue. I was able to boot without the CD. Now, just need to work on the audio and graphics driver tomorrow.
Is it fine to update to 10.5.8? Or should I avoid it for now. Thanks
I seem to have everything working fine with this guide except the graphics driver.
I have a geoforce nvidia 7900gs (256mb) card.
i selected it on OsX86 tools and tried to apply it, by even putting in my custom resolution 1680 X 1050, but it still only shows me under display the 1024 X 764 i think it is.
how do I resolve this? Thanks
I installed leopard 10.5.6 yesterday and with the kext attached in the first post system show audio card but it doesn't works. Today i will try to update at 10.5.8, i hope to solve this problem. Someone had this problem?
With my graphic card (xfx nvidia 8600 gts xxx) i'm able to change resolution, but when i change system freeze and i need to reboot manually with power button and when system reboots the new resolution is shown correctly.
My ram are 1066Mhz but system say that are 800mhz, it is a problem?
i selected it on OsX86 tools and tried to apply it, by even putting in my custom resolution 1680 X 1050, but it still only shows me under display the 1024 X 764 i think it is.
Did you use the method descripted in the first post to install the graphic card? I think that if the only resolution available is 1024x768 the gpu is not detected correctly.
get the audio kext from this guide
an 43.com/osx/
those worked for me.
I'm still trying to get my card to work right.
I've update system at 10.5.8 and it works well! Thanks very much
Now i would like to understand with system show me that my ram is 800mhz instead 1066...
Can only boot with boot132 cd
OK I have os x 10.5.8 zooming along on a q6600 quad, G31M-ES2L. Audio, nVidia 7300gt, all apps seem normal. When I boot from Chameleon I get the Logo and the spinning spokes, the the blue screen and mouse pointer appear and then the curtain of doom descends "You need to restart your computer. Hold down the power button for several seconds or press the Restart button."
I can boot via the boot132cd, choose 80 for primary disk and Darwin launches into my installation. Its probably obvious and simple but I don't seem to see a way out just yet.
Great tutorial BTW.
yabadabadol
Hangs at 'transfer files screen'
Thanks for the guide. After setup of keyboard and at the 'transfer files 1st thru 3rd choices, with 4th 'not at this time' …hangs and eventually reboots to welcome screen.
Any help much appreciated. Thanks
Did you try to do this in safe mode? You have to boot with -x option from chamilion or boot-132.
I can now boot to one of 2 sata hdds. I used uinstaller and chose the PC_EFI v9 Chameleon edition 1.0.12, had no luck with Chameleon v2.0. My usb hdd and 2nd sata drive aren't shown as boot options. Any ideas?
@swhyaFor all of you using the Gigabyte GA-G31M-ES2L, I have been running this board for awhile. Attached is legacy audio for Leopard and Snow Leopard and some tools. In the zip is a folder called HDA, in that folder is 2 other folders, one for Leopard and one for Snow Leopard and 1 file dsdt.aml. You can use either the dsdt.aml or the…
Thank you very much swhya! I have been trying to get sound working on my Gigabyte GA-G31M-E2SL Rev. 2 under Snow Leopard for some time now and your method finally got it running. Decompiling your .aml file and comparing it with mine made me notice a "Device (AZAL)" section was still remaining in mine. After commenting the AZAL device out, I was able to boot with audio using my patched dsdt and your HDA.kext in /Extra/Extensions. Next there were some sound assertion failures to fix. They all disappeared when I disabled Azaila audio in the BIOS.
All of my references to "patched dsdt" refer to using http://www.insanelymac.com/forum/index.php?showtopic=14… ↗
On a side note, I was not able to get audio working without resorting to dsdt patching. Maybe removing Device (AZAL) or disabling it in the BIOS is the minimum requirement to just use kexts?
I've got the system working great with this tutorial, but my only problem is that I'll convert high definition video, and such and also it serves as a VPN server / iTunes / AppleTV server, etc etc. and if I try to do like converting a video and watching a movie on my AppleTV it will have a kernel panic, is there anyway to see what's wrong?
Thanks,
Andrew
Hey everybody, I'm new to this forum and have this mobo (GA-G31M-ES2L) which I just got up and running on Snow Leopard thanks to this tutorial link (http://lifehacker.com/5351485/how-to-build-a-hackintosh… ↗), however, audio isn't working.
Do you all have any tips for any things to try? I've tried VoodooHDA and it doesn't seem to work (unless I'm doing it wrong).
When I open the Sound control panel, it shows no input or output devices.
When I go to System Profiler > Audio, I see:
Device ID: 0x1458A002
Audio ID: 12
Available Devices:
Line Out: Connection: 1/8-Inch Jack
External Microphone: Connection: 1/8-Inch Jack
External Microphone: Connection: 1/8-Inch Jack
Headphone: Connection: 1/8-Inch Jack
S/P-DIF Out: Connection: 1/8-Inch Jack
I also tried to launch Audio MIDI Setup but only the Audio Devices page comes up and it says "No Devices Found". (MIDI devices don't show up at all...weird...is that something else broken?)
I actually don't need built-in audio to work, and would prefer to use a third-party soundcard (Tascam US-1641). I googled for US-1641 drivers and did find drivers specifically written for Snow Leopard, so downloaded and installed them. But the US-1641 isn't seen by the OS nor by the Tascam controller application.
I'm new to the OSx86 world so please be gentle. Any pointers to places to research or basic things to try would be really appreciated. Thanks!
still kicking.................help please
Just a head's up…seems that I finally was able to install 10.5.2 with dual boot vista. Not much else happening though after …
17. When you are at the desktop, copy the OSX_Tools folder to your desktop (via CD, external drive, etc)
18. Open the OSX_Tools folder, open the Chameleon folder, and install Chameleon.
19. If you have one of the motherboards listed in the DSDT folder, copy the corresponding dsdt.aml file to the root of your hard drive. If not, go to the next step.
20. Open the DSDTPatcher Folder in the OSX_Tools folder. Launch the App in there
21. Select: New HPET Option, and Apply DSDT Patch to: on the right side. Select your OSX Hard Drive from the dropdown menu and click 'Run DSDT Patcher'
You will be prompted for your admin password. Enter it. This will generate the DSDT file that is needed for your motherboard. When it is done:
22. Quit the DSDT Patcher …
All the above are not working or it appears not. I am able to use 'boot 132 disc' to get into either vista or osx after entering '80' at boot. Also the vista option shows 'windows ntfs' which prior to installing the Chamelon dsdt package only had hd(0,1). Sorry to go in such detail but it has been difficult getting any of this working. I noticed my first post was on 9/9/09, so I'm making headway. Again appreciate any help.
I posted this in the v2.0 thread, but tought i'D post it in here too since you guys seem to reallly know what you are talking about !
First, I would like to thank every member of the community for being so active and helpful.
i'm pretty active myself on the osx86 scene, but since I rarely get desperate (I always end up finding an answer to my problems) I rarely post. So i will try to keep the story short.
The story started a couple months ago when i stumbled across a guide to install mosX on a gygabite P35C-DS3R ( my media center) and since then, i'm trying (with a lot of succes!) to install osX on all sort of configurations.
Last week, after a friend gave me a buggy dell server he had, i realised I had all the hardware i'd need to build another hackintosh except for a motherboard:
-Pentrium D dual core @ 2.8 ghz
-1x 2gig OCZ ddr2-800 ram
-2x 80 gig sata drives
-1x IDE or SATA optical combo drives
-1x decent psu
-------------------
I tough i'd give myself a break and go buy the legendary g31m-es2l board from a local store. its the rev 2.0 but i have a realtek 8139 NIC laying arround. Well... i've never had as much trouble trying to install osX on a machine :'(
I post because (even tho i'm not a pro) i'm running out of options to try. I have the feeling its something really stupid, so here I am asking for help. :
Motherboard G31m-es2l v2.0 with bios FC.
I really want to try the retail install methos on this board but i can't even getthe osx retail disk to boot, so for now i'll skip that part and tell you what else i tried.
--------------------
The problems is that after every installation i do (and the installation goes fine) the comp enters into a reboot loop. I'll try to explain where it reboots in my own words. When, after you get into the chameleon logo, you boot with -v for example. the computer starts looading a couple files then switches video mode (it seems, at least to me) That's where my comp reboots. It also happens with the 132boot method. I pop the boot CD in, see the lunix bootloader, eject it, put the Leopard retail disk, boot on it, and it does the same thing. starts loading then tries to switch video mode and reboots.
------
What i tried so far:
-Partition using GUID and MRB, tried both
-BIOS settings : sata in all modes (enhanced, auto, combined, etc) disabled/enabled the onboard lan, HPET in 32 ans 64 bits mode, ACPI S1 and S3, soft off (instant off), SMART enabled and disabled, Disabled onboard IDE and enabled it... tried to looad default and optimised settings...
-tried my 7800gtx witch i know is working on osX (used in other setups) to bypass the onboard video i was using for a while (didnt mind to be stuck in 1024 for now, but tought it might be the problem)
-tried installing from an IDE AND sata optical drive(ideneb 1.5.1 and iatkos v7 for now since 132 method reboots.
-tried another PSU just in case
-in iatkos and/or iÐeneb, I keep the default kernel, but i tried to install with and without the realtek drivers for my 8139 based NIC, with and without the x3100 video drivers, tried with and without the cpus=1 boot and patch from the installation, tried with and without an intel ICHXX chipset driver, tried with and without every audio drivers... No matter what I try, it always reboots at the exact same spot.
-tried to boot with -v, with "CPUS=1", forcing the resolution to 1024, alouette !
I think i did all i could, and read sooo many threads hoping to find what i did wrong...
i now admit my defeat (for now!) and turn to you guys and girls for a little help.
gave a lot of details, i know, but i tought it would be better than not enough.
My goal is to practive my retail install skill with with board (10.5 and SL), that's why i'm posting here.
I also speak french if you are more comfortable giving advices in french!
thanks alot in advance !
Guillaume
Is this also the way to make a nice vanilla snow leopard install?
First post, so my apologies for possibly resurrecting a thread.
I have the G31M-ES2L Rev.2 board. I have sound working now, using a combination of the Lifehacker guide, swhya's kexts, and LegacyAlc883. However, I've come to an impasse.
I can't get mic or line in working. The volume meter shows that there is sound coming into the board, but no sound output from the device. Just to make sure that sound IS indeed working, I played a few YouTube videos, and no problems there.
Anyone have any solutions to this sort of issue, or should I give up on it?
Have you tried using quicktime to record from your mic?
A mac won't play mic sounds through the speakers by default.
I've got a rev 2 G31M-ES2L and a Netgear GA311 PCI card (RTL-8169 based).
I was having problems with internet connectivity, saying the cable was unplugged - messages "AppleRTL8169Ethernet: IOInterruptEventSource error"
I tried the Psystar driver, the driver from the Realtek website, a downloaded AppleRTL8169Ethernet.kext but still no joy.
In the end I deleted AppleHPET.kext and AppleIntelCPUPowerManagement.kext from /System/Library/Extensions and everything now works.
Hope this helps somebody.
can't boot
first try with a hackintosh,
i was able to get through the usb boot and install of snow leopard with a three partition set up, one snowleopard/backup/and chameleon. But on my first reboot the system won't boot from the usb again? it freezes at the dmi pool…
any suggestions?
i've tried using a boot132 cd which when loaded into darwin recognizes the snowleopard partition but just goes to a black screen when trying to boot it
Appreciate any advice
Got everything working so far with this guide with one exception… Ethernet. Is there a kext file for it? Or do I need a seperate NIC card.
I followed the guide, but can't seem to get CI/QE with the onboard video. I assumed that was taken care of in the patched DSDT, since there's no patched GMA3100 kext included.. But alas, that doesn't seem to be the case.
I'm also not getting any network connectivity, another kext that seems to be missing from the original pack. I'm actually wondering if the patched DSDT is even loading, because when I click restart, it doesn't reboot, it just hangs.. A patched DSDT would have fixed that..
I have v2.0 board and the boot 132 method does not work for me. The installer fails. I have swapped memory, set BIOS to enhanced, etc., no luck. Any suggestions?
Successfully installed, but still have some problems
First of all, thanks so much for this Tutorial, its been a fantastic help.
I've managed to install Snow Leopard onto my pc, it's using the G31M-ES2L Motherboard, Intel core 2 Duo, 2GB Ram. If any other specs are needed please say?
I've followed the steps for putting files in the Extra folder, but the audio still doesnt work and the resolution isnt right (i need it to be 1366x768). Also the network settings arn't working. It doesnt allow me to chose any other connection methods (eg. Ethernet or Airport) apart from Built-in Serial Port for a dial up connection. Any ideas how to fix that problem?
I've double checked and i've copied LegacyALC883 into the extensions folder correctly. Also, another problem!, i have a Nvidia GT220 graphics card, but i dont think it's being recognised.
Any help regarding these issues would really be appretiated.
I just want to share this: If you're looking for a rev 1.x G31M-ES2L mobo, there are some available on eBay right now (April 2010). I know because I just bought one from the guy. It's item 120445578721.
Most places won't tell you what rev they're going to send. They can't be bothered. I've written a lot of places & usually get that runaround. This guy's ad mentions rev 1.x. I messaged him first to double-check & he messaged right back saying yes, a rev 1.x is what he'd send. I ordered one and, sure enough, that's what it is.
I've had great luck with the G31M-ES2L running Leopard for about a year. Just updated to Snow. I decided to get another board & lucked out finding another 1.x.
To be clear - I don't know the seller and am not involved in the sale of these boards. Just want to get the word out to others who, like me, wouldn't mind getting ahold of one.
After much reading, re-reading and then realising I had missed the odd small (but very important) detail here and there, finally got my rig working.
Running the following:
Rev 2.0 board
Intel 4.6 Ghz chip
2 x 1Gb Corsair DDR-2 PC640 RAM
nVidia 8600GT
Belkin F5D5000ea (Realtek 8139 chipset)
Had took a while to latch onto the Rev 2.0, ethernet not compatible bit, then tried a D-Link 530TX NIC, which also failed - crappy VIA/Rhine Chipset. Once the Belkin was popped in, hey presto!
Next step is to pop Win7 on the second partition, then my life is complete!
One final question - can I simply buy a retail DVD of Snow Leopard and upgrade. Or would it be better to follow this process for SL?
Thanks again guys - top top work!
Built-in LAN Atheros AR8131 works perfectly with this kext
I trawled through many forum and got my built-in LAN Atheros AR8131 works perfectly 1st go with this kext. Read all about it here:
http://www.insanelymac.com/forum/index.php?showtopic=18… ↗
Download here:
http://www.insanelymac.com/forum/index.php?act=attach&a… ↗
This kext is 64-bit but works flawlessly with 32-bit as well!
I am trying to get the built-in GMA X3100 working as I have managed it succesfully (with an older Leopard kext AppleIntelGMAX3100FB 156KB ) on my laptop HP 6710b but so far, no luck. Anyone has success with the built-in graphic on this G31M-ES2L rev 2 board yet ? Should I give up and use something like the cheap nVidia 8400GS
@SydneyboyI trawled through many forum and got my built-in LAN Atheros AR8131 works perfectly 1st go with this kext. Read all about it here: http://www.insanelymac.com/forum/index.php?showtopic=18… ↗ Download here: http://www.insanelymac.com/forum/index.php?act=attach&a… ↗ This kext is 64-bit but works flawlessly with…
I'm sure if you haven't already you can read about this all over but the graphics on your mobo is gma3100 not gmax3100 as far as I know there is no fully working solution.
Black screen
I have a rev 1.x board with a Radeon X1550. When I boot with Boot132 and insert the retail Snow Leopard disc, Chameleon loads the kernel, but the screen then turns black and nothing else happens.
Any suggestions? Thanks.
@SydneyboyI trawled through many forum and got my built-in LAN Atheros AR8131 works perfectly 1st go with this kext. Read all about it here: http://www.insanelymac.com/forum/index.php?showtopic=18… ↗ Download here: http://www.insanelymac.com/forum/index.php?act=attach&a… ↗ This kext is 64-bit but works flawlessly with…
Excellent work! Managed to get this working, although it doesn't recognise the built-in LAN after a reboot - unless I run kext utility?…
Is there something a need to do to make the changes/recognition of this kext "permenant"?
G41-ES2L Install does not recognise my Windows 7 install
I have OS X 10.6.4 Installed and fully functional on my G41-ES2L Board using the instructions on :
osx 86.co/f19/guide-retail-snow-leopard-dvd-install-for-g41m-t5351/
I also have Windows 7 Installed on a separate HD on the same box, but when I boot up using OS X as the primary Disk, the Boot loader does not show the Windows Partition when I click any key on bootup..
I can boot to the Windows partition using the Bios and switching to the Windows partition but would like to have the option of Windows showing up in the OS X Boot loader..
Do you still have AppleHDA in S/L/E ?
@user411Thank you very much swhya! I have been trying to get sound working on my Gigabyte GA-G31M-E2SL Rev. 2 under Snow Leopard for some time now and your method finally got it running. Decompiling your .aml file and comparing it with mine made me notice a "Device (AZAL)" section was still remaining in mine. After commenting the AZAL device…
Guys I am having problem with step 2.
"When everything is loaded, remove the Boot CD and insert your Apple Leopard Retail DVD into your drive. You should see the word 'BOOT', when the DVD is recognized, press Enter.
It should now start to boot the Retail DVD, after a few minutes you will reach the OS X installation screen"
When I see the word boot and insert my Apple DVD, I press enter. Then it askes me which partition I want to use (81 or 80) After I pick that, another question pops asking which drive, when I pick the drive and hit enter, it says bootmgr is missing. What is wrong? I am using Windows 7 64 bit currently..
Really appreciate your help
Blank Screen afer retail DVD screen
Hydroxide, did you solve this? I have the same issue doing mine.
@HydroxideGuys I am having problem with step 2. "When everything is loaded, remove the Boot CD and insert your Apple Leopard Retail DVD into your drive. You should see the word 'BOOT', when the DVD is recognized, press Enter. It should now start to boot the Retail DVD, after a few minutes you will reach the OS X installation screen" When I see…
文獻來源與貢獻者溯源名錄（共 49 位具名成員 · 原始討論串 #3187）
| 成員用戶名 | 本卷貢獻角色 | 發帖數 | 活躍時間窗 |
|---|---|---|---|
| @sk1nhd33t | 核心貢獻者 | 8 | 2009-07-15 → 2009-08-17 |
| @mecanoiz | 核心貢獻者 | 5 | 2009-07-29 → 2009-08-06 |
| @ju421019 | 核心貢獻者 | 5 | 2009-09-08 |
| @Voyn1x | 主筆作者 | 4 | 2009-06-20 → 2009-07-24 |
| @lewson | 核心貢獻者 | 3 | 2009-07-30 → 2009-08-23 |
| @JoQ | 核心貢獻者 | 3 | 2009-08-02 → 2009-08-07 |
| @Ricky87 | 核心貢獻者 | 3 | 2009-09-08 → 2009-09-09 |
| @drbee | 協作成員 | 2 | 2009-06-21 |
| @Ianxxx | 協作成員 | 2 | 2009-07-16 → 2010-08-15 |
| @arsonwells | 協作成員 | 2 | 2009-08-16 |
| @drossxyu | 協作成員 | 2 | 2009-09-04 → 2009-09-05 |
| @yabadabadol | 協作成員 | 2 | 2009-09-08 → 2009-09-10 |
| @353inf | 協作成員 | 2 | 2009-09-09 → 2009-10-03 |
| @bobble666 | 協作成員 | 2 | 2010-05-25 → 2010-09-20 |
| @milanca | 協作成員 | 1 | 2009-06-20 |
| @cRuNciE | 協作成員 | 1 | 2009-07-22 |
| @jdc1001 | 協作成員 | 1 | 2009-07-28 |
| @leroy308 | 協作成員 | 1 | 2009-08-07 |
| @DrTechnickal | 協作成員 | 1 | 2009-08-10 |
| @rabalder | 協作成員 | 1 | 2009-08-10 |
| @zypheruk | 協作成員 | 1 | 2009-08-15 |
| @mjamike | 協作成員 | 1 | 2009-08-22 |
| @simsim | 協作成員 | 1 | 2009-08-27 |
| @PigBoT | 協作成員 | 1 | 2009-08-27 |
| @BlaSTiWi | 協作成員 | 1 | 2009-09-02 |
| @swhya | 協作成員 | 1 | 2009-09-02 |
| @Aberracus | 協作成員 | 1 | 2009-09-04 |
| @user411 | 協作成員 | 1 | 2009-09-18 |
| @Andrew | 協作成員 | 1 | 2009-09-19 |
| @altoidboy | 協作成員 | 1 | 2009-09-27 |
| @biggui | 協作成員 | 1 | 2009-10-07 |
| @nelisftw | 協作成員 | 1 | 2009-10-14 |
| @bmckay | 協作成員 | 1 | 2009-12-02 |
| @yogi446 | 協作成員 | 1 | 2009-12-04 |
| @idk12 | 協作成員 | 1 | 2010-01-16 |
| @finster | 協作成員 | 1 | 2010-01-21 |
| @marc | 協作成員 | 1 | 2010-01-29 |
| @matthewordie | 協作成員 | 1 | 2010-01-30 |
| @UnaClocker | 協作成員 | 1 | 2010-01-31 |
| @boomerx01 | 協作成員 | 1 | 2010-02-06 |
| @fantome2024 | 協作成員 | 1 | 2010-03-19 |
| @shiningchihuahau | 協作成員 | 1 | 2010-04-01 |
| @zenrascal | 協作成員 | 1 | 2010-04-19 |
| @Sydneyboy | 協作成員 | 1 | 2010-08-08 |
| @evil saltine | 協作成員 | 1 | 2010-08-22 |
| @ropuri | 協作成員 | 1 | 2010-12-12 |
| @zcream | 協作成員 | 1 | 2010-12-26 |
| @Hydroxide | 協作成員 | 1 | 2011-11-10 |
| @jespejo | 協作成員 | 1 | 2011-12-31 |