#11
|
|||
|
|||
Finally got my laptop and after a few failed attempts finally seem to be getting somewhere i've got leopard running on my laptop
i tried a few distro's some of which wouldn't even boot in the end i ended up using kalyway 10.5.2 which unfortunatly is a bit out of date but is working brilliantly i managed to get it running (heres a screen shot of my desktop) with fully working
Last edited by andyi89; 01-06-2010 at 08:34 PM. |
#12
|
|||
|
|||
Probably a system.kext problem. Open the Terminal and enter "uname -a" it will return you current Kernel. Then got to /System/Library/Extensions peform right-click on system.kext and select Informatiosn - compare the system.kext version with the one of your Kernel.
Quote:
Optionally do a Back-Up of your current Kernel and Extensions folder - this is usually not needed on Vanilla-able machnies, but I prefer to do it the safe way. On Terminal: sudo -s cp /mach_kernel /bak_kernel cp -R /System/Library/Extensions /Extensions_bak Now give it a shot and apply the 10.5.8 Combo Update - it migth need a second attempt to boot into your system again. Hopefully everything will be fine. AMD Phenom II X4 955 - ASRock AM3A770DE - 8GB DDR3-1333 - Radeon HD 5570 1GB passiv - BCM4318 802.11b/g - Snow Leopard Retail
+++ AMD Phenom X3 8450 - ASRock AM2NF6G-VSTA (BIOS L2.39) - 4GB DDR2-800 - Radeon HD 4650 512MB - Snow Leopard Retail (retired) / OpenBSD |
#13
|
|||
|
|||
Quote:
going to look for a version of vanilla kernel and system.kext now am unsure of what version to use tho just going to search hackintosh search thanks again for everything its been a massive help! Update!: so i rushed into the updating thing and used the offical apple combo update and its killed my os its just boots constantly on -v it stops on firewire error going to download ideneb combo update now Last edited by andyi89; 01-12-2010 at 07:03 PM. |
#14
|
|||
|
|||
okay ive installed kalyway again without kexts and then updated it straight away after update it boots up into just a greyish screen with a few squgily boxes i can move with the mouse
i can boot into safemode and it works fine so i tryed installin the hd radeon kext i have and now it just boots up into a blank bright white screen any ideas? what that could be ? |
#15
|
|||
|
|||
When you are in Safemode, go to /System/Library/Extensions and delete ATIRadeonX2000.kext - (needless to say, that you create a Backup first).
Then I think, you should be able to boot normal again. AMD Phenom II X4 955 - ASRock AM3A770DE - 8GB DDR3-1333 - Radeon HD 5570 1GB passiv - BCM4318 802.11b/g - Snow Leopard Retail
+++ AMD Phenom X3 8450 - ASRock AM2NF6G-VSTA (BIOS L2.39) - 4GB DDR2-800 - Radeon HD 4650 512MB - Snow Leopard Retail (retired) / OpenBSD |
#16
|
|||
|
|||
Quote:
What!! you are actually a genius!! I spent all night last night searching around trying all sorts of different things!! and u just reply the simplest solution and wink at me and it works perfect everytime! :') haha! so its woking perfect atm i havent installed any sound kexts or infact many kexts yet but its updated and running lovely having the trouble of it not booting sometimes again am going to check the system.kext and kernel now thanks again!! Update: checked the kernel and system.kext ive got Darwin andrew-irelands-studio-1555.local 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 and system kext version 9.8.0 but i still have this boot issue ive got the bootloader u recomended aswell and still it comes up the white screen with apple and the circular loading bit doesn't appear could be whiles its journaling i think going to try repair permissions on -v it just hangs on firewire i think ill check again update again!: do i need to delete disabler.kext now update is complete? will that bring back powermanagement or do i have to reinstall that? Last edited by andyi89; 01-13-2010 at 08:06 PM. |
#17
|
|||
|
|||
Quote:
Quote:
Ofcourse you could try disabling Firewire at the BIOS settings if it's possible (might be called something like 1394), or to remove the Firewire Kernel-Extension as well... Quote:
If you had pwrmngmnt on your configuration before the update, you might have been using the 9.2.0 speedstep Kernel by netkas? Alltough it is possible to keep using the old Kernel, it's an obsolete solution. It is possible to make native speedstep to work by modifiyng the DSDT table, but if you are looking for an easier solution you shoudl check out VoodooPower made my superhai. http://www.insanelymac.com/forum/ind...owtopic=143898 AMD Phenom II X4 955 - ASRock AM3A770DE - 8GB DDR3-1333 - Radeon HD 5570 1GB passiv - BCM4318 802.11b/g - Snow Leopard Retail
+++ AMD Phenom X3 8450 - ASRock AM2NF6G-VSTA (BIOS L2.39) - 4GB DDR2-800 - Radeon HD 4650 512MB - Snow Leopard Retail (retired) / OpenBSD |
#18
|
|||
|
|||
okay so ive done a reinstall and updated straight away deleted the x2000 kext and well all seems well got sound videos are a bit funny but thats to be expected sounds fine using voodoohda and well all seems well
start up issue still exists but im not to fused about that atm biggest thing was to get it working heres a screen of my desktop ive just got my hands on the snow leopard os 10.6 thinking of having ago at installing that :') but! id be so gutted if i lost what ive got atm Last edited by andyi89; 01-16-2010 at 04:24 PM. |
#19
|
|||
|
|||
That's always the most important - to be satisfied with what you have.
You might like this it will fix the "Unknown" to your correct CPU modell on 10.5.x - just for the eye-candy but... Quote:
AMD Phenom II X4 955 - ASRock AM3A770DE - 8GB DDR3-1333 - Radeon HD 5570 1GB passiv - BCM4318 802.11b/g - Snow Leopard Retail
+++ AMD Phenom X3 8450 - ASRock AM2NF6G-VSTA (BIOS L2.39) - 4GB DDR2-800 - Radeon HD 4650 512MB - Snow Leopard Retail (retired) / OpenBSD |
#20
|
|||
|
|||
Newbie
Hey!
I'm so glad I've found this thread,It took me a long time to find someone saying they could install Mac OSX on a system almost identical to mine Although you've got 1gb extra ram and I'm on 7 pro.. I've just installed iatkos v7 and I can't boot into it,I have installed mac osx before on a netbook and never had this issue.What happens is the i select mac using Chameleon 2 and then the shiny apple boot logo just hangs.I have got a few issues with the boot permissions and I'm just about to repair them,But could you think of any issues I might be having? And if not how would I view to boot screen to check for errors? Thanks EDIT: I reinstalled selecting drivers and other things that matches my system.. And got this error: I installed the following: iAKTOS v7 main system Chameleon v2 bootloader X86 patches :Extra directory Decrypters:Apple Decrypt Kernel: Voodoo 9.7.0 ACPI: x 86 ACPI Disabler Remove Tymce Driver: VGA:Ati HD System: Intel Speedstep Sound:Voodoo HDA Driver PS/2 mouse/keyboard: Voodoo PS/2 driver with trackpad plugin Laptop Battery Nework:My broadcom Lan and Wi-fi drivers Hope someone can help! 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. Last edited by Richard.T; 01-30-2010 at 10:44 PM. |