Hi there,

I'm desesperate to find the good combination of drivers to install properly the system. Here is my config :

Esprimo E5625 (PDF)

VGA : Nvidia (0x10de) - Device ID : 0x084b - Revision ID : 0x00a2 (Geforce 8200)
NIC : Broadcom BCM5787
MB : "D2724" with chipset MCP78PV (Nvidia)
Audio : Realtek ALC262

Every installations I tried results to :



Any successfull story on this hardware ? any advice ?

Thank you very much in advance

Try booting with "-v" (verbose boot flag) so you can tell us what is stoping the boot, but i my mem doesn't fails me, that is about PS2 ports.

---

CPU: Intel Pentium Dual E2140 1.6 GHz. Graphics: Intel(R) 82945G (128 MB). Board: Asus P5GC-TVM/S Chipset: Intel Lakeport-G i945GC. HDD: 232 Gb S-ATA Samsung
Version 10.6.2 32bit. Kernel: Vanilla. Audio: VoodooHDA 0.2.2 with prefpane. Video: Stock GMA. PS2 fix: VoodooPS2
USB 2 not working

Acer Aspire 4530-6823
CPU: AMD Athlon™ X2 QL-62 2.0GHz. Graphics: Integrated GeForce® 9100M G. Chipset: nForce® MCP77MH.

Thank you for your answer, here is where it stop :

Waiting for boot volume with UUID F38AD99D.........
Waiting on <dict ID="0"><key>IOProviderClass</key><stringID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>

So, it seems he can't find the hardrive which is a SATA (if I'm not wrong), I check the bios to enable/disable the pata compatibility but nothing helps

Thanks a lot

First use AHCI mode in BIOS setup for the disks.
Second have u try using and usb keyboard/mouse.

---

CPU: Intel Pentium Dual E2140 1.6 GHz. Graphics: Intel(R) 82945G (128 MB). Board: Asus P5GC-TVM/S Chipset: Intel Lakeport-G i945GC. HDD: 232 Gb S-ATA Samsung
Version 10.6.2 32bit. Kernel: Vanilla. Audio: VoodooHDA 0.2.2 with prefpane. Video: Stock GMA. PS2 fix: VoodooPS2
USB 2 not working

Acer Aspire 4530-6823
CPU: AMD Athlon™ X2 QL-62 2.0GHz. Graphics: Integrated GeForce® 9100M G. Chipset: nForce® MCP77MH.

Thank you, I'll try when I get back to the computer, monday.

Good week-end

Using AHCI was better but it's still hanging further :

... /var/sbin/ocspd[73]: starting

Probably due to the video card kext (as I saw on forums) . I tried almost all NV enabler unsuccessfully :/
Should I load another one at a specific time ?

Thank you very much in advance !