#1
|
||||
|
||||
RealtekR1000.kext Removed, still works!
I removed the RealTekR1000.kext, needed for my ethernet, and my Snow Leopard boots a bit faster now, and ethernet still works!
Snow has support for my ethernet ports without that kext!? (I needed it for Leopard.) OS: Snow Leopard Mac OS X 10.6.2 (10C540) | Vanilla Kernel | 64 bit Kernel | EFI64 CPU: Intel Core i7 920 @ 3.6 GHz GPU: 2x SLI Dual GTX 260 (OpenCL working)(QE+CI) RAM: 6GB DDR3 1600MHz 7-7-7-20 AUDIO: Realtek (5.1 config) HDD: RAID 0- 1 + 1TB HDD's | 320GB HDD MOBO: MSI X58 Platinum SLI (Intel ICH10) CASE: Haf 932 Full Tower Case + Red Cathodes MONITOR: Asus VK266H 26" 1920x1200 LCD All working |
#2
|
|||
|
|||
huh. thats awesome!
Computer: Gateway 838GM | 9.5.0 Vodoo Kernel |2.0 RC4 Chameleon Bootloader | Processor:Intel Pentium 4 630 / 3 GHz | RAM: 512MB | OS: Windows 7 32BIT, OSx86 iPC 10.5.6 | Mainboard Chipset: Intel 915G Express | Graphics Card:Integrated Intel GMA 900 | Video Memory: Dynamic Video Memory Technology 3.0 | Audio:ALC 860 |Card Reader:8 in 1 Integrated| Hard Drives:1x 200GB SATA(Win 7), 1x 320GB SATA(OS X) Both Internal
|
#3
|
||||
|
||||
I know! I was like, WTF!? Never knew I had support out of box with my ethernet on Snow!
OS: Snow Leopard Mac OS X 10.6.2 (10C540) | Vanilla Kernel | 64 bit Kernel | EFI64 CPU: Intel Core i7 920 @ 3.6 GHz GPU: 2x SLI Dual GTX 260 (OpenCL working)(QE+CI) RAM: 6GB DDR3 1600MHz 7-7-7-20 AUDIO: Realtek (5.1 config) HDD: RAID 0- 1 + 1TB HDD's | 320GB HDD MOBO: MSI X58 Platinum SLI (Intel ICH10) CASE: Haf 932 Full Tower Case + Red Cathodes MONITOR: Asus VK266H 26" 1920x1200 LCD All working |
#4
|
|||
|
|||
How did you install Snow?
Did you put that kext in E/E before first boot? Are you sure ethernet works vanilla? What is you ethernet? Post some specs ... good for troubleshooting (not that you need any lol) _____________________________________________ Acer 6936g 864G32mn [@ Snow Leopard 10.6.1 32/64bit C2D 2,4Ghz 4Gb 1066mhz DDR3 9600m GT 512 GDDR3 ___Snow Leopard tutorial -> http://www.infinitemac.com/f57/guide...ted-for-t4183/ _________Leopard tutorial ->http://www.infinitemac.com/f19/guide...-iatkos-t3357/ |
#5
|
||||
|
||||
I installed Snow leopard within an older Snow leopard onto a bigger HDD.
Yes it was there before first boot. My ethernet is the Realtek RTL8111C OS: Snow Leopard Mac OS X 10.6.2 (10C540) | Vanilla Kernel | 64 bit Kernel | EFI64 CPU: Intel Core i7 920 @ 3.6 GHz GPU: 2x SLI Dual GTX 260 (OpenCL working)(QE+CI) RAM: 6GB DDR3 1600MHz 7-7-7-20 AUDIO: Realtek (5.1 config) HDD: RAID 0- 1 + 1TB HDD's | 320GB HDD MOBO: MSI X58 Platinum SLI (Intel ICH10) CASE: Haf 932 Full Tower Case + Red Cathodes MONITOR: Asus VK266H 26" 1920x1200 LCD All working |
#6
|
|||
|
|||
thats insane. do you think Apple is using a different Ethernet port for the new line? like the tablet... it doesn't seem crazy that they would put it in before it was released.(like the iPod touch 2G had support before it was out, and so did one of the iPhones.)
Computer: Gateway 838GM | 9.5.0 Vodoo Kernel |2.0 RC4 Chameleon Bootloader | Processor:Intel Pentium 4 630 / 3 GHz | RAM: 512MB | OS: Windows 7 32BIT, OSx86 iPC 10.5.6 | Mainboard Chipset: Intel 915G Express | Graphics Card:Integrated Intel GMA 900 | Video Memory: Dynamic Video Memory Technology 3.0 | Audio:ALC 860 |Card Reader:8 in 1 Integrated| Hard Drives:1x 200GB SATA(Win 7), 1x 320GB SATA(OS X) Both Internal
|
#7
|
||||
|
||||
I don't know! but im excited! I never read of anyone running this realtek ethernet port VANILLA. I justed deleted it because while booting, Realtekr1000.kext was showing to many lines, hanging the boot slightly. I removed, and it still works!
OS: Snow Leopard Mac OS X 10.6.2 (10C540) | Vanilla Kernel | 64 bit Kernel | EFI64 CPU: Intel Core i7 920 @ 3.6 GHz GPU: 2x SLI Dual GTX 260 (OpenCL working)(QE+CI) RAM: 6GB DDR3 1600MHz 7-7-7-20 AUDIO: Realtek (5.1 config) HDD: RAID 0- 1 + 1TB HDD's | 320GB HDD MOBO: MSI X58 Platinum SLI (Intel ICH10) CASE: Haf 932 Full Tower Case + Red Cathodes MONITOR: Asus VK266H 26" 1920x1200 LCD All working |
#8
|
|||
|
|||
The question is if bonjour is working.
|
#9
|
||||
|
||||
How would I figure that out, and why do i need bonjour?
OS: Snow Leopard Mac OS X 10.6.2 (10C540) | Vanilla Kernel | 64 bit Kernel | EFI64 CPU: Intel Core i7 920 @ 3.6 GHz GPU: 2x SLI Dual GTX 260 (OpenCL working)(QE+CI) RAM: 6GB DDR3 1600MHz 7-7-7-20 AUDIO: Realtek (5.1 config) HDD: RAID 0- 1 + 1TB HDD's | 320GB HDD MOBO: MSI X58 Platinum SLI (Intel ICH10) CASE: Haf 932 Full Tower Case + Red Cathodes MONITOR: Asus VK266H 26" 1920x1200 LCD All working |
#10
|
|||
|
|||
Are you sure you didnt string with EFI Studio os similar, or patched dsdt?
Did you make your own or downloaded from a tutorial or something? There is alot of "voodoo" under snow's hood.. so to speak. Anyway, cool for you!! 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. _____________________________________________ Acer 6936g 864G32mn [@ Snow Leopard 10.6.1 32/64bit C2D 2,4Ghz 4Gb 1066mhz DDR3 9600m GT 512 GDDR3 ___Snow Leopard tutorial -> http://www.infinitemac.com/f57/guide...ted-for-t4183/ _________Leopard tutorial ->http://www.infinitemac.com/f19/guide...-iatkos-t3357/ |