chulo15157
09-28-2009, 02:26 AM
Hi all, I am very new to this whole process and am trying to build one of these systems as a research project. I tried to install iatkos V7 with the 10.5.7 and can't even get past the apple grey screen, with the following is my system info:
Processors Information
-------------------------------------------------------------------------
Processor 1 ID = 0
Number of cores 4 (max 4)
Number of threads 4 (max 4)
Name Intel Core 2 Quad Q9400
Codename Yorkfield
Specification Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz
Package (platform ID) Socket 775 LGA (0x4)
CPUID 6.7.A
Extended CPUID 6.17
Core Stepping R0
Technology 45 nm
Core Speed 1999.9 MHz
Multiplier x FSB 6.0 x 333.3 MHz
Rated Bus speed 1333.2 MHz
Stock frequency 2666 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2 x 3072 KBytes, 12-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 8.0x
Max VID 1.188 V
Chipset
-------------------------------------------------------------------------
Northbridge Intel P35/G33/G31 rev. A2
Southbridge Intel 82801IR (ICH9R) rev. 02
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual, (Symmetric)
Memory Frequency 400.0 MHz (5:6)
Monitoring
-------------------------------------------------------------------------
Mainboard Model Benicia (0x000002AB - 0x00766381)
LPCIO
-------------------------------------------------------------------------
LPCIO Vendor Fintek
LPCIO Model F8000
LPCIO Vendor ID 0x1934
LPCIO Chip ID 0x581
Config Mode I/O address 0x2E
Config Mode LDN 0x4
C
Hardware Monitors
-------------------------------------------------------------------------
Hardware monitor Intel Core 2 Quad Q9400
Temperature 0 40°C (104°F) [0x3C] (Core #0)
Temperature 1 40°C (104°F) [0x3C] (Core #1)
Temperature 2 41°C (105°F) [0x3B] (Core #2)
Temperature 3 37°C (98°F) [0x3F] (Core #3)
Hardware monitor NVIDIA GeForce 9600 GS
Temperature 0 70°C (158°F) (GPU Core)
DMI
-------------------------------------------------------------------------
DMI BIOS
vendor American Megatrends Inc.
version 5.30
date 09/05/2008
Display Adapters
-------------------------------------------------------------------------
Display adapter 0
Manuf. API index 0
Display name \\.\DISPLAY1
Name NVIDIA GeForce 9600 GS
Revision A1
Codename G94
Technology 65 nm
Memory size 768 MB
Memory type DDR2
Memory bus width 192 bits
PCI device bus 4 (0x4), device 0 (0x0), function 0 (0x0)
Vendor ID 0x10DE (0x1B0A)
Model ID 0x623 (0x9015)
Performance Level 3D Applications
Core clock 500.0 MHz
Shader clock 1250.0 MHz
Memory clock 500.0 MHz
Software
-------------------------------------------------------------------------
Windows Version Microsoft Windows Vista (6.0) Home Premium Edition Service Pack 2 (Build 6002)
DirectX Version 10.0
In addition i have a Dell Power Edge 400SC with the following spec.
Graphics card- PCI 256 MB ATI
Memory: 2 GB
Serial ATA Bus - Capacity 931.5GB
I am able to install everything and get the install successful screen but when i transfer the Hard drive to my HP machine it just freezes on the grey screen,,,, PLEASE HELP Me.. What settings should i be using?
Processors Information
-------------------------------------------------------------------------
Processor 1 ID = 0
Number of cores 4 (max 4)
Number of threads 4 (max 4)
Name Intel Core 2 Quad Q9400
Codename Yorkfield
Specification Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz
Package (platform ID) Socket 775 LGA (0x4)
CPUID 6.7.A
Extended CPUID 6.17
Core Stepping R0
Technology 45 nm
Core Speed 1999.9 MHz
Multiplier x FSB 6.0 x 333.3 MHz
Rated Bus speed 1333.2 MHz
Stock frequency 2666 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2 x 3072 KBytes, 12-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 8.0x
Max VID 1.188 V
Chipset
-------------------------------------------------------------------------
Northbridge Intel P35/G33/G31 rev. A2
Southbridge Intel 82801IR (ICH9R) rev. 02
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual, (Symmetric)
Memory Frequency 400.0 MHz (5:6)
Monitoring
-------------------------------------------------------------------------
Mainboard Model Benicia (0x000002AB - 0x00766381)
LPCIO
-------------------------------------------------------------------------
LPCIO Vendor Fintek
LPCIO Model F8000
LPCIO Vendor ID 0x1934
LPCIO Chip ID 0x581
Config Mode I/O address 0x2E
Config Mode LDN 0x4
C
Hardware Monitors
-------------------------------------------------------------------------
Hardware monitor Intel Core 2 Quad Q9400
Temperature 0 40°C (104°F) [0x3C] (Core #0)
Temperature 1 40°C (104°F) [0x3C] (Core #1)
Temperature 2 41°C (105°F) [0x3B] (Core #2)
Temperature 3 37°C (98°F) [0x3F] (Core #3)
Hardware monitor NVIDIA GeForce 9600 GS
Temperature 0 70°C (158°F) (GPU Core)
DMI
-------------------------------------------------------------------------
DMI BIOS
vendor American Megatrends Inc.
version 5.30
date 09/05/2008
Display Adapters
-------------------------------------------------------------------------
Display adapter 0
Manuf. API index 0
Display name \\.\DISPLAY1
Name NVIDIA GeForce 9600 GS
Revision A1
Codename G94
Technology 65 nm
Memory size 768 MB
Memory type DDR2
Memory bus width 192 bits
PCI device bus 4 (0x4), device 0 (0x0), function 0 (0x0)
Vendor ID 0x10DE (0x1B0A)
Model ID 0x623 (0x9015)
Performance Level 3D Applications
Core clock 500.0 MHz
Shader clock 1250.0 MHz
Memory clock 500.0 MHz
Software
-------------------------------------------------------------------------
Windows Version Microsoft Windows Vista (6.0) Home Premium Edition Service Pack 2 (Build 6002)
DirectX Version 10.0
In addition i have a Dell Power Edge 400SC with the following spec.
Graphics card- PCI 256 MB ATI
Memory: 2 GB
Serial ATA Bus - Capacity 931.5GB
I am able to install everything and get the install successful screen but when i transfer the Hard drive to my HP machine it just freezes on the grey screen,,,, PLEASE HELP Me.. What settings should i be using?