Snow Leopard 10.6.1–10.6.2 para Intel y AMD creado por Hazard

Thanks for the reply. I went ahead and booted off the dvd i created by burning the snow leopard iso and my maching just kept rebooting. I should mentioned that I tried a few times and that I also changed my bios to "AHCI" with no success.

I should post my specs:

AMD Phenom II X4 940
Gigabyte MA790X-UD4P
4GB Corsair DDR2
ATI Radeon HD4650
1TB Hitachi Sata drive.

I currently have a triple boot:
XP (has its own drive)
Windows 7 (installed on the Hitachi Drive)
Gentoo ( has its own drive)

I plan to install Snow Leopard on the Hitachi Drive. I'm using Grub to boot all three Operating systems.

My disc reads at 192KB, but I have successfully booted from it on my dual core system.

Sometimes the distros just dont work for certain systems. i.e. back in the day, iDeneb and (something, cant remember which) would do the same thing... reboot. The only one that worked for me was Leo4all. You may have a similiar issue. Sorry guy.

Hazard also reboots instantly on my AMD pc. What I did was create two MBR/HFS+ partitions. On the first one I installed iDeneb 10.5.7. From within iDeneb I've installed Hazard onto the second partition. The iDeneb partition is now being used for Windows 7.

To start the install in iDeneb, open Terminal and open Volumes/Hazard_install_dvd_name/System/Installation/Packages/OSInstall.mpkg if I remember correctly.

I'm pretty sure this will work on my laptop but.. Intel X4500 driver?
That doesn't even exist...
Did anyone tried it on that type of video card?

what i need to install (kext, options from costumize) this snow to my pc : gigabyte 945 gm s2, pentium d 920, nvidia g force 8500gt and 3gb ram ddr2. Ιf you know someone please tell me. I have kernel panic after installation.

I was just wondering if my PC would be able to run this. And I would need help with the kext I need.

AMD Athlon 64 X2 4800-
Brisbane

ECS Motherboard Iris8
Chipset is Nvdia MCP61

Graphics are Nvidia GeForce 6150SE nForce 430

@snakeo2Anyone? Any suggestions

I have same system as you and had the same problem with the first hazard distro which worked fine on my other system with athlon x2 and sb600. I got sl installed om the phenom 2 x4 sb750 system using the hazard client server distro. try that. Make sure you are installing from a sata optical drive and ahci in bios AND reduce your ram to 2g for the install.

After I install on phenom/sb750 system and boot sl. It fails with "mis-match between kernel and cpu pm". This distro needs the null cpu management kext. Anyone know how to add this to the distro from windows? I have the kext.

@cottage1909I have same system as you and had the same problem with the first hazard distro which worked fine on my other system with athlon x2 and sb600. I got sl installed om the phenom 2 x4 sb750 system using the hazard client server distro. try that. Make sure you are installing from a sata optical drive and ahci in bios AND reduce your ram…

From Windows?
Not a chance... you need Mac running to edit an SL distro...

"After I install on phenom/sb750 system and boot sl. It fails with "mis-match between kernel and cpu pm". This distro needs the null cpu management kext. Anyone know how to add this to the distro from windows? I have the kext."

I've had success with ideneb 10.5.8 lite. You could install ideneb 10.5.8 and then make edits to SL from 10.5.8. I'm having problems with diskutility letting me create a partition, but I suspect that I after I get past that issue, it should install. I will report back. where can i find the hazard client server distro? thanks.

trouble booting dvd

I just got a gateway sx2802 intel duo core, i had an old dell desktop and it booted the dvds fine, but with the new computer it attempts to boot but then immediatly restarts, im using the hazard dvd which worked fine on old desktop why not the new one?

@snakeo2"After I install on phenom/sb750 system and boot sl. It fails with "mis-match between kernel and cpu pm". This distro needs the null cpu management kext. Anyone know how to add this to the distro from windows? I have the kext." I've had success with ideneb 10.5.8 lite. You could install ideneb 10.5.8 and then make edits to SL from…

I attached the torrent.

edit distro

@andyvandFrom Windows? Not a chance... you need Mac running to edit an SL distro...

I have an sl 10.6.2 system running on my other pc. I can access the installed partition that fails as it is on the same disk. Is there a way i can add the kext from the running sl? Where would i find how to do this. I am new to Mac.

@snakeo2"After I install on phenom/sb750 system and boot sl. It fails with "mis-match between kernel and cpu pm". This distro needs the null cpu management kext. Anyone know how to add this to the distro from windows? I have the kext." I've had success with ideneb 10.5.8 lite. You could install ideneb 10.5.8 and then make edits to SL from…

Can you describe how you edit the distro?

re-boot on install

@casual21I just got a gateway sx2802 intel duo core, i had an old dell desktop and it booted the dvds fine, but with the new computer it attempts to boot but then immediatly restarts, im using the hazard dvd which worked fine on old desktop why not the new one?

The hardware will be different on your new system and incompatible with the install. Try the hazard client/server install, download from the attached torrent file. This worked for me. If this does not work you should check that your bios is set to ahci for the hdd and optical drive you are installing from which must be sata, you may need to reduce your memory to 2gb for the install. If none of this works then i would suspect your graphics chip is not supported.

Maybe someone can help me here. I went ahead and downloaded hazard snow leopard client server 10.6.2 and it booted with no problem. However, I'm running into partition problems. I have a 1TB drive which currently holds windows 7. During the windows 7 installation i allocated 350GB to windows 7 and left the remainder of the drive unallocated. After booting the hazard dvd and when I get to the point of creating a partition to install snow leopard, I cant. If i leave my volume scheme as "current", I cant create a new partition. It's simply grayed out. If I select 1 or 2 or 3 partition, it divides my drive into 1, 2 or 3 partition respectively which makes me feel uneasy since it doesnt recognize my two existing partition for windows 7.

I downloaded gparted and tried creating a partition that route, but gparted did not see the two existing partitions where windows resides. I went ahead and created a separate 250GB partition via storage management in windows 7. I went ahead and booted off the hazard dvd thinking I would be able to select the newly created partition ( which I did not format) and to my surprise it was grayed out. What am I missing? Or will I have to buy a separate drive which will bring my total to 4 which im not too crazy about.

@snakeo2Maybe someone can help me here. I went ahead and downloaded hazard snow leopard client server 10.6.2 and it booted with no problem. However, I'm running into partition problems. I have a 1TB drive which currently holds windows 7. During the windows 7 installation i allocated 350GB to windows 7 and left the remainder of the drive…

I too had partitioning problems. I gave up and have a separate mac drive. Did you try letting osx partition the drive, deleting partition(s) in osx and then installing windows in the free space?

In my opinion its best to use a separate drive but i agree 4 discs is too much in a pc. It got too much and i had 5 drives in one pc. Now I only have 1 windows boot drive in a pc and use the hot swap dock ICY DOCK MB877SK-B Tray-less Alumin, then you manage your drives easily - as many disks as you like, great for backup too.

I went out and bought a new drive in order to try installing snow leopard. Everything went fine, except when I reboot and I get the exact message as someone posted below

" "mis-match between kernel and cpu pm". This distro needs the null cpu management kext' ? anyone has any suggestion as to fix this? I will try to install ideneb 10.5.8 and see if that works.However I dont want to have 10 distros, I would like to simply install snow leopard, so I'm open to suggestions.

I'm just curious, would it be to long of a list to post if someone were to post a list of most of the best hardware to use for this distro? I'm pretty new to this, but i'm also pretty desperate to get this distro running on my amd-based PC. So desperate in fact, that i would buy some new hardware to get this working.

I don't know, im just curious about this…

Look at my specs which I listed somewhere on this thread. I was able to install snow leopard client server 10.6.2 by hazard, but now im having problems registering the damn thing. After searching, I found that some people suggest booting in 32bit mode in order to register, but I'm not quite sure how to boot in 32 bit as everytime I restart, it automatically boots and I dont see the option to press f8 as I did when i was booting off the dvd. Any suggestions?

can anyone provide a valid serial number for snow leopard server 10.6.2? the one i tried using is not working:

XSVR-106-000-R-LN2-VLQ-PRW-H6C-44L-XH2-P

to boot into 32 bit mode try holding down 3 and 2 while booting.

I tried your suggestion but it didnt work. I simply pressed the 3 & 2 together and powered on the computer but didnt work. If it doesnt work, I think I'll do the install again, excpet this time I wont install the server

@snakeo2I tried your suggestion but it didnt work. I simply pressed the 3 & 2 together and powered on the computer but didnt work. If it doesnt work, I think I'll do the install again, excpet this time I wont install the server

If you dont select the server option in the hazard customisation you wont be asked for a serial number, i wasnt. Not needed for a client install.

If you find a resolution to the mismatch please post it. i am stuck in the same place.

Thanks for the suggestion, I was aware of that, but wanted to install the server distro. If I cant find a fix, I may just reinstall the client only. So are you able to get to the registration screen? Prior to installation, these are the options I selected, which I found on leohazard website:

Snow_Leopard_Server_10.6.2
AnV_10.2.0_Kernel
Chamelon_RC3_PCEFI_10.5
AMD_Patch
NVEnabler
VoodooHDA_v2.5.3
ATIATA
Realtek_8169
ElliotForceLegacyRTC
IOATAFamily_Fix
OpenHaltRestart

this thread was helpful. Good luck.
leoh azard.com/Forum/viewtopic.php?f=19&t=155&start=0

For those following, I did a reinstall this time without selecting snow leopard server and everything seemed to have gone ok. My network is working, "about this mac" is working and recognizes my amd cuad core and my 4gb ram, etc. I just tried to restart and it froze, so not sure what I did wrong. I will keep testing to see the how stable the OS is on my hardware and report back. Good luck

KP at first boot, legacy kernel

KP at first boot. SL10.6.1-10.6.2_SSE2_SSE3_IntelAMDbyHazard, legacy kernel
i have PeintiumD and Asus P5LD2 Deluxe
and ideas?

machinecity

Did you change your BIOS settings to "AHCI"? Maybe try booting with the following flags busratio=20 cpus=1. If that doesnt work, I would probably look at the HCL and see where you fit with your hardware. After further testing, my sata dvd drive is not recognized, my audio doesnt work, shutdown & restart dont work , and I'm only allowed to select one screensaver. For now, I would be happy with fixing reboot, shutdown & audio. Any suggestions are welcome.

I have a Foxconn A7GM-S mobo, which is an AMD mobo w/ 780G chipset and SB700 southbridge. Does any know what kexts i would need for that chipset in order to run the Hazzard distro?

@snakeo2Did you change your BIOS settings to "AHCI"? Maybe try booting with the following flags busratio=20 cpus=1. If that doesnt work, I would probably look at the HCL and see where you fit with your hardware. After further testing, my sata dvd drive is not recognized, my audio doesnt work, shutdown & restart dont work , and I'm only…

ahci enabled, all thermal functions disabled... still the same KP, what about DSDT? will it help?

@snakeo2For those following, I did a reinstall this time without selecting snow leopard server and everything seemed to have gone ok. My network is working, "about this mac" is working and recognizes my amd cuad core and my 4gb ram, etc. I just tried to restart and it froze, so not sure what I did wrong. I will keep testing to see the how…

finally works on my gigabyte phenom 2 x4 790x/sb750 chipset. Installed from hazard client/server distro selected only kernels and cmos fix from hazards customize screen. Then rebooted hazard dvd f8 to get hazard bootloader then selected my install disk then enter and soon in sl ok.

Congrats! Are you having issues with restart/shutdown? How about audio?

@cottage1909finally works on my gigabyte phenom 2 x4 790x/sb750 chipset. Installed from hazard client/server distro selected only kernels and cmos fix from hazards customize screen. Then rebooted hazard dvd f8 to get hazard bootloader then selected my install disk then enter and soon in sl ok.

Which kernel and cmos did you selected? anyone can drive me to install this release?

@snakeo2Congrats! Are you having issues with restart/shutdown? How about audio?

I can restart and shutdown lan/internet works. Runs really stable. No audio devices so i re-installed and thistime selected audio drivers in addition to cmos fix and kernels. The install went fine but when i booted sl got double kp so it does not like my onboard audio (ati rv770/790) with these drivers. Any ideas to get audio working?

Where did you get all those options/features from? They were not on my hazard customization screen at start of install. Are you using the customization screen that you can select after you select your installation drive?

I also managed to apply the final hazard update to the original install using ppf omatic for windows but it did not seem to make any difference on my hardware. I suppose i need to know how to build a ppf file with the appropriate drivers or how to add them from sl

I only just realised if you press f8 when the aliens appear it puts you into a manual bootloader where you can slect your installed sl drive. Prior to this i was using efi bootloader and this gave me the mismatch problem.

I have the same chipset as you and these settings worked for me:

AnV_10.2.0_Kernel
Chamelon_RC3_PCEFI_10.5
AMD_Patch
NVEnabler
VoodooHDA_v2.5.3
ATIATA
Realtek_8169
ElliotForceLegacyRTC
IOATAFamily_Fix
OpenHaltRestart

i should point out that my audio is not working. I also cant restart/shutdown. Try those settings.

@cottage1909I can restart and shutdown lan/internet works. Runs really stable. No audio devices so i re-installed and thistime selected audio drivers in addition to cmos fix and kernels. The install went fine but when i booted sl got double kp so it does not like my onboard audio (ati rv770/790) with these drivers. Any ideas to get audio working?…

I got most of the information from leo hazard web site. I just found my audio chip from my mobo's user manual (ALC889a) which is one of the options. In case you are wondering my mobo is a Gibabyte GA-MA790X-UD4P. Which kext did you use to be able to reboot/shutdown? Yes I am using the customization screen after I select my destination drive.

@gipoWhich kernel and cmos did you selected? anyone can drive me to install this release?

I will tell you how i did it. Straight out of the box with no black magic.

First you must set your bios southbridge to ahci, ide wont work. The n you need to boot the hazard client server disk from a sata dvd drive that is in ahci mode.It MUST be the client/server distro. make sure you have no usb devices plugged in other than a vanilla keyboard and mouse if you dont have serial ones. You dont need to select anything. Just let it go and if you are lucky you will see the grey osx install screen. After you select your language you will see utilities in the top line. Select disk utilities then select your drive and partition it for mac journalled. close this then select continue and select the install drive you have just initialised. You will see a screen with a customize option select customise then select kernels and cmos fix. then continue. When the install completes reboot and when you see the aliens press f8 and select your installed sl drive. If you are lucky you will end up running snow leopard or you will get kernel panic. Your hardware is different to mine so it may not run - Then you need to play around with the customisation options i mentioned.

Maybe you can work through it with this. Its a lot more than i had. I used the process of elimination and googling which took days. This only takes about 1/2 hour to try.

I used the same approach for my athlon x2/sb600 system using the original hazard distro.

The toorrent for the client/server was posted earlier. Download this with utorrent a burn to dvd with the appropriate utility - i use poweriso.

@snakeo2I got most of the information from leo hazard web site. I just found my audio chip from my mobo's user manual (ALC889a) which is one of the options. In case you are wondering my mobo is a Gibabyte GA-MA790X-UD4P. Which kext did you use to be able to reboot/shutdown? Yes I am using the customization screen after I select my destination…

I am not seeing the same settings in the customize screen. How did you get that set?

My installed system is vanilla hazard. i have installed no kexts. Thats my next challenge.
Can you explain how you did it?

@cottage1909I am not seeing the same settings in the customize screen. How did you get that set? My installed system is vanilla hazard. i have installed no kexts. Thats my next challenge. Can you explain how you did it?

I wonder if we have different versions of hazar's snow leopard? I'm using snow leopard server client 10.6.2. After formatting the drive, I go to the screen where you are ready to install. On the left bottom of the screen, there is a "customize" button, I click on it and all the options are there. You have click on the little arrow to open the subfolders under each category. I got this screenshot from leo hazard's site, but it's the same one I used.

leoh azard.com/images/Final10.6.1-2.jpg

I think i will do a fresh install and hopefully my audio and reboot/shutdown will work. After that, my next challenge is how to add an entry to my grub bootloader to boot snow leopard. Let me know if it helps.

@snakeo2my sata dvd drive is not recognized. Are you having the same issue?

You have same bios as me. You need to set ahci in southbridge if you set combined mode you sata dvd drive mist be in one of first 4 ports, otherwise disable combined mode. but you also need to select 1st boot device as sata/dvd. in my bios it showed both ide and sata cd/dvd boot drive options. i had one of each and it was set to ide/cd-dvd so it ignored my sata dvd drive. perhpas you have the same issue - its set to ide cd/dvd.

I didnt see the sub-menus in the settings. Good spot - my stupidty i will check.

I just did another re-install and still having audio issues despite the fact that I chose the audio patch which matched my audio chipset. I'm still having issues with restart/shutdown, which is frustrating. I will keep trying and report back.

@snakeo2I just did another re-install and still having audio issues despite the fact that I chose the audio patch which matched my audio chipset. I'm still having issues with restart/shutdown, which is frustrating. I will keep trying and report back.

With my new understanding of the settings what i was selecting that worked was all kernels and all cmos fixes. To this i added ati drivers and alc889a audio.

No difference when booted up. Still no audio output device. Restart worked fine. I still only have 1280x1024 resolution offered - i have a 2560x1600 monitor. It identifies my graphics adapter as radeon 4890. I think it is xfx 4830 or 50 definitely not 90.

main problem seems to be just no audio seems stable and reliable

i am booting sl from the hazard boot loader. I would like to dual boot with windows 7 but without more research i dont know how to. Whether its as simple using easybcd to add and entry for osx to the windows MBR? etc. any ideas?

I will try your suggestion. As far as multiboot, I've read a few tutorial about dual booting windows 7 & mac and it seems pretty easy. Actually during the install, I think you can select to install cameleon which will let you boot both operating systems. I havent read much about cameleon, so cant really offer more concrete information. I also noticed that it didnt recognize my video card (radeon 4650). Instead it shows as radeon 2600 series, and it only shows it has 256mb of memory when my card has 1gb.

cottage1909,

By any chance did you run "Marvin's AMD Utility" to patch your system? I tried running it but it keeps freezing? So you installed all kernels and all cmos patches? I wonder if that wouldnt cause a kernel panic since you are installing all of them?

uhm my specs are
phenom 9950
m3a78-em
sb600
780g
alc1200
hd4850
sata hard drive.

what do i need to select after i click custom install.

I would recommend an external DVD drive. Get an ATA to USB device and an ATA DVD drive (Burner would be of more use) You have something to fall back on if you need it.

@cropsBig Question: I have a new netbook (small notebook without DVD). How to install this distro from USB?:-/ Is it the full DVD or does it have something ripped like extra voices? Old (or stable) doesn't mean bad. Do you mean that snow leopard SHOULD use newer hacks? TIA (this is the first Snow Leopard distro that I see)

@Hack3rYes, it would automatically reboot my system. I've tried a plethora of boot flags. Yes, I have a AMD Athlon II 215 system

I've the same problem and the same mobo.
What did U do?

I did a Torrent DL of this from <Website> and burned it to a DVD.

The disk won't boot! Should it have? I also noticed that it fit on a single layer DVD, which also seems strange.

Must this be installed as an update? Did I get a bad image?

I'm planning on installing this on: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01… ↗

It has 3 Gigs of RAM, and an AMD 4450e dual core

I'm VERY green still when it comes to Macs

Boot fails on Dell Vostro

Hi I am using Snow Leopard 10.6.1-10.6.2 Intel AMD made by Hazard iso dl'ed via Bit torrent. My machine is a Dell Vostro 1400 that's with T7500 cpu (2.2 Dualcore) 4gb ram and the Intel GM965 chipset. SATA hdd (250gb) and DVD drives and NVidia GS8400m 128mb

The dvd seems to boot fine and use F8 to add in the - v parameter and it continues to boot. Darwin starts and the resolution of the screen changes. Then I get a panic with the following detail:-

panic(cpu 0 caller 0x00407075): "ACPI: AcpiOsFree"@/VoodooKernel/xnu-1228.7.58/iokit/Kernel/IOLib.cpp:724
Debugger called: <panic>

backtrace (cpu 0), Frame : Return Address (4 potential args on stack)

** lots of 0x5a793xxxx lines ****

Backtrace continues
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleACPIPlatform(1.0.3)@0x5489a000->0x548d0fff
dependancy: com.apple.iokit.IOPCIFamily (2.4.1)@0x5483d0000
dependancy: com.apple.iokit.IOAPIFamily (1.2.8 )@0x5483d0000

Phew
Any one got any idea whats going on or how to get the install working? I managed to do a vanilla install of 10.6.1 on an MSI wind - but on the Vostro I cannot get anything to boot -s- similar errors trying boot123 OSX86 boot disks.

Is the Vostro just a no go for OSX?

Has anybody figured out how to bypass the RAM checks yet? It's really the only thing stopping me..

Working perfectly! Very good.

PC Intel D685PERL + Pentium 4 (3.0), MacOS 10.6.2 (Hazard)

Cann some one help me with Snow leopard.

My configuration:
asus p5k premium
ati 4670 512 Mb
2 HD WD sata drives
sata Dvd drive

I install Snow Leopard 10.6.1-10.6.2 Intel AMD made by Hazard and then after the first restart friz the comp. and an screen says

You need to restard your computer.Hold down the power button until unit it turns of.

Where is the problem?

someone could help me?
I tried many times to install Snow Leopard on my notebook Hazard DV5245ea HP and Acer netbooks AAO D250, but without success.
At startup always go into kernel panic.
I successfull install it on AMD processor and I can not get it to work with Intel … crazy!
for your help.

cpus=1 busratio=20

@heartsurfer008Bro I have downloaded it but can you with the installation process as I am new to this My PC config is Gigabyte S series motherboard AMD Phenom Processor [Quad Core] I am now running Windows 7 x64 [7600 Build] I tried to boot & then pressed F8 & tried entering both [-v arch=i386 & arch=i386], after doing that my PC reboots again doin…

Try this:

cpus=1 busratio=20

this is my first post here.
I'm trying to install this Distro into my PC.
Firstly sorry for my bad english
Secondly my problem is the double panic when i'm booting Snow Leopard
My hardware is the seguent:
Motherboard: Asus M4a77TD Pro
Processor: AMD Phenom II X4 3.0Ghz 945
Ram: 2x2Gb DDR3 1333Mhz
HD IDE 160 GB maxtor; HD SATA 250 GB Maxtor
Video Card: Sapphire HD 4670 1 GB DDR3
DVD ROM - LG SATA

I fully tryed a iDeneb Distro and everything work (exception to Audio and low graphics)

I tryed this configuration for SL

Legacy 10.2 kernel
Amd Patch
ATI 45xx-46xx
AppleATIATA
Chameleon RC3 PCEFI 10.5
LegacyAppleRTC

and it give me double panic for CPU
Someone can give me help?
LorenzoGa ITA

SL gets stuck in boot after install

I'm new here and need some help...

I had a successful installation and now after reboot i got stuck in the grey screen where the apple logo appears.
When I take the options "-v busratio=20" i get still waiting for root device.
Thank you for your help, sorry for my english (I'm german)
Sammy

My system:
Fatality FP-IN9 SLI - Mainboard
Nvidia Geforce 8800GT - Graphic
8GB Ram OCZ
Intel Core2Quad Q6600 CPU (x64)

I'm with a problem, I downloaded the MAC, but in time to boot it restarts the computer.

My Settings:
AMD Phenom 750
GTX 260
320GB SATA HD
ASUS SATA DVD
NForce 790th / CROSSHAIR II FORMULA

And the images here:

i think iam very close.. can you gues tell me what error is this..i get kernel pani.. says.. mac os version is not yet install..

Need help

Please could anyone tell me that to do with my AMD it is show me this error:
System config file '/com.apple.Boot.plist' not found
This error show m during installation Snow Leopard for AMD by Hazard and nothing wrong?

please help

i tried to nstall it on a hp pavilion dv6-1350ej about 20 times.
just one time i came all the way to the finish configuration of the installed osx. (user name, passsword and etc.) but i forgot to check th ps2 support and didn't have keyboard or mouse recoginition.
as i'm new at this i tried to install it another time but without success. i forogt wich boxes i checked and unchecked on setup.
could someone please advice?

my laptop is:
hp pavilion dv6-1350-ej:
t4300 cpu, 2gb ddr3, ati radeon hd 4530, 250GB,
WIFI - intel wifi link 1000 bgn
EHTERNET - realtek pci

I have 2 SATA II hard disk and 1 IDE hard disk
one with 500GB and another with 1 TB
it doesn't detect 500GB SATA II
but it can detect another 1 TB SATA II (Windows Installed in it)
i plan to use 500GB SATA II for Hackintosh. B4 iATKOS V7 can detect but now it can't
it's same for all distros, none can detect 500GB SATA II
In bios i set it to ACHI>IDE too, but still cannot detect.
need help

This distro is supposed to be intala directly from DVD without the need to have a version already running on Mac OS pc?

re

...well, I'm wondering if this could work on:
AMD Phenom II 955 BE
2x 1GB DDRII 800MHz
4870 512MB
DFI LanParty DK 790FXB-M2RS
2x 320GB SATAII
1x 750GB SATAII
PS/2 keyboard
USB mouse

@ufo_alli think iam very close.. can you gues tell me what error is this..i get kernel pani.. says.. mac os version is not yet install..

Good news or bad news. If you have leopard installed on another partition (like I did) all you have to do is replace a file in the snow leopard partition.

SO, go into Leopard and access the Snow Leopard partition. Then go to System/Library/Extensions. Take the kext from the attached zip file and drop it into the Extensions directory and replace. Then reboot into Snow Leopard and all SHOULD work correctly.

Edit: For those who don't have Leopard on another partition - when installing from the disk, custimize the install and find the "IOATAFAMILY Fix" and make sure it is selected. This will make sure you don't get a kernel panic becuase of the kext.

my specs are
toshiba satellite l515 s4925
intel c2d 2.1 ghz
intel motherboard
intel based onboard graphics

the setup installs correctly
but when i start it gives me error and says me to restart my pc
i am using Snow_Leopard_10.6.1-10.6.2_SSE2_SSE3_Intel_AMD_by_Hazard

what should i do:-/

Hello, i would like to know if this distro is working with my system, i tried to boot Snow_Leopard_10.6.1-10.6.2_SSE2_SSE3_Intel_AMD_by_Hazard from DVD with -v option but i can't continue with the installation because it will just restart immediately...My system specs below

System : Asus K40AD
Processor : AMD Athlon 64 X2 M300
Chipset : 780G + SB700
Video : ATI Radeon HD4570 512MB
HDD : 320GB SATA
Memory : 2GB

i'm planning to dualboot my laptop with windows 7 & snow leopard on the same harddisk..i'm currently running windows 7.. thnks in advance

@hbdwaisi tried to boot Snow_Leopard_10.6.1-10.6.2_SSE2_SSE3_Intel_AMD_by_Hazard from DVD with -v option but i can't continue with the installation because it will just restart immediately

It doesnt like your video card. Boot also with -x.

Let us know if that works.

@timberwolf5It doesnt like your video card. Boot also with -x. Let us know if that works.

i've tried booting also with arch=i386 together with the -v option, still no luck.. same thing happens restart immediately..

ok let me try this -x option and i'll let you if it works or not..wish me luck! i hope this will work..anyway, thnks for quick reply

ooops! still no luck, i'm stuck with (look picture below)

left side of my screen

right side of my screen

sorry for the low quality of my screenshots..

is it possible to get my graphics card working should i use nv enabler or something else

help installing this distro on my Biostar a780l mobo

Here are my pc specs:

Biostar a780l motherboard
Amd athlon 64 x2 4450e dual core processor
3GB DDR2 PC6400 800MHz ram
Galaxy geforce 240GT
80GB PATA HDD
160GB PATA HDD
500GB SATA HDD
2TB SATA HDD
Memorex SATA DVD Burner
NZXT newegg exclusive full tower case

I need help installing mac os x snow leopard 10.6.1 10.6.2 Intel/amd made by hazard on my mobo. I get a cpu panic on cpu 0. I am still a newbie on installing mac os x on an amd hackintosh pc. Any help would be most appreciated.