Hilo de soporte «no oficial» de Empire EFI

I got install failed @ ALMOST 60% , not all files were copied , I tried normal , legacy and ( lined ) ICH9R/M users version as i have ICH9R Contoller and intel G33 Chipset , Asus IPIBL-LB Motherboard .
I choosed only base system and additional fonts .
When i restared ( after install was failed ) i booted from the usb hard disk ( which i am installing snow leopard to ) and i got nothing just black screen , when i inserted empire efi cd i didn't see my hfs+ partition .
Note Again : I am installing to iternal hard disk connected via ide-to-usb connecter .
I posted a full summary of my computer by everest ultimate and attached it , it maybe useful .

@prasys IDE controller

EDIT: i've downloaded other versions of the EFI, i found that the legacy EFI v1.08 works for me

noob here I used the legacy cd and retail sl disk install worked great. The only issue is my usb ports will only work if I boot with the legacy disk then select my osx drive in the boot loader. If I just boot from the HDD with the my hack bootloader my usb ports do not work. Is there something I can check to see if I need to install or flag to fix this?

What I can do?
empireefiv_108_amd2
Installer_Log_6-Dec-2009.txt
Installer Log:
paste bin.ca/1705273
amd athlon 64 x2 mobility
ati sb700

@prasysYes @skew , type USBFix=y in Chameleon boot or add that to your USBplist. If you are not sure how to do this there is a how to somewhere in this forum @MNG , great @aatkco , umm i'll look into it , install without additional fonts , etc

I did , unfortunatley install failed @ 10 Minutes Remaining - i thought it will complete .
What i have to do ?
There is another thing , when i put empire efi cd and boot from it i didn't see the usb drive's partition which i am trying to install snow leopard to , i am wondering if it remains disappeared after installing successfully ( oneday maybe it will ) how can i boot snow leopard then ?

Sorry to hear that My work is being ripped and its being put on torrent sites without the read me. Making it hard Here are the tips 1. Its installed , OSX can't bless the drive. Its normal , its not a real mac 2. If empire EFI does not see the partition. It means your BIOS refuses to pass over the USB controller or some sort. Try to…

1. it's installed ! when i try again and open disk utility i see that the used space is only 5 GB , not all files were copied .

2. ok , i tried but it seems like my mobo doesn't have ide connecters for the hard disk ( they are all sata ) , i'll ask you a question : if i bought internal sata hard disk and connected it as slave ( my current hard disk is master ) will empire efi read it and install will succees ? please answer me ASAP /

Hi prasys, thanks for your great EmpireEFI. I was able to successfully install the x58 version and it works about 95% which I am happy with. I was wondering if you could help me figure out why after I install the myhack package everything goes bad, the only thing that works good after the myhack is I am able to access my ntfs drives, with the plain x58 install I cant access my drives. If I dont install the myhack, OSX wont boot automatically and I have to run the EmpireEFI cd everytime to boot into OSX.

thanks for any info

Hp dv8

All

Is there anyone who can help me? Since Friday I own a HP DV8-1080, fast machine however very very though to get SL installed.

Tried everything but unfort. without success. Finally I came across Empire EFI which helped me install SL however I cannot but into SL (System installed from retail DVD with any errors)

On booting I do get a kernel panic (boot options: cpus=1 busratio=20), with the following extensions in the backtrace:

- AppleAPIC
- PS2Controller
- AppleACPIPlatform
dependency IOACPIFamily enIOPCIFamily

Anyone who can help?

Tom

Well, i tried with the legacy issue.
My chipset is an Intel G33, as far as i know its supported, but there are no advanced options about drives in my bios(blame Dell...).

I'm sorta out of luck, or is there a way to get passed the error?

Swapped my harddrive from SATA port 0 to 1, but that didn't help.

@aatkcoi burned empire efi and snow leopard retail dvd and started installing but i got install failed , i tried again and i got the same message : I am installing into a usb hdd ( it's an internal hdd and connected with ide to usb connecter ) , active , primart and formatted to one guid partition . I don't know what is the proplem , so i…

Hey I also Ran into this same error last night Im using the latest Empire EFI 1.08 on a Asus P5W DH Deluxe. It let me format my drives but got to about 30% before it failed. Hey Prasys on your blog you say to try a different verison of the EFI if one doesn't work, I want to try the 1.01 version because thats the version that someone used in a guide that Im using and it worked for them. But on your site the link to rapidshare is down is there some way I can get the 1.01 from you or is there another place I can download it to see if it works?

thank you,

I just finally installed, iPC 10.5.6. Final w/PPF patch v1.1. Success. I updated the bootloader to the Chameleon 2 RC4 build 648 last nite, and then ran across a thread from Shadow, referencing EmpireEFI, plus someone that works for the 'other' OS vendor had mentioned using EFI to install S.L. 10.6. I thought, wow, that's beyond me because I have a nForce430 MCP61 chipset and AMD Phenom X3 8400. This was the prevailing thought, when I first attempted installing iDeneb 10.5.x and iATKOS v7, which I could not get to work on my system. Then after reading a few days of other information and re-reading HCL for each updated version of Leo, I thought, I have to try another version, iPC worked for me, but had to try many patches before getting to actually run right. Not to confuse the real issue, for posting.

The problem I run into is updating to 10.5.8 combo Mac update. I've read over Netkas's guides. I would assume to use both 10.5.7 and 10.5.8 because I'm attempting 10.5.6 to 10.5.8 without 10.5.7. So skipping one because 10.5.8 is out and would be preferred by me.

After reading your blogsite briefly scanning the important parts, especially for me because I'm interested in updating without having to patch this and that, backup these /System/Library/Extension and then copy them back overwriting something I could use, plus the voodoo1 kernel 9.5. I wanted a simple solution.

According to your work, (this based it seems on Sno Leo) your application would take care of all the passing data to Apple without all these headaches and stuff.

Would your application work in my case to update iPC 10.5.6 to Mac Combo Udate 10.5.8?

Best wishes
Stu

@ULTIMATIi have download the empire EFi iso..unfotunately the booting always restart it self after mounting doned...did i do something wrong...i have retail snow leopard purchased from store $50sgd... so plz anybody..help...can u guy give a very workin empire efi please.. my spec.. AMD Turion x2 ATi Radeon HD4200 Atheros AR5B93 AR8131 Gigabit…

dude you got ripped! It costs 29.00 online from MAC Store

I have an AMD Turion Processor,and a Nvidia GeForce 8200M Motherboard. I was wondering if there was a version that is compatible with this.

Hackintosh on i7 ASUS P6T Intel X58

Pradeesh,
I have the above hardware. v1.08 gives errors such as Voodoo wont load.
the v1.02 x58 does better, loads fakesmc, but then states 'waiting for boot volume with UUID …' but appears to move on with ".com.apple.AppleFSCCompressionTypeZlib load succeeded "
finally though I am left with "Still waiting for rood device" which gets repeated forever.
I saw your information suggesting changing the SATA drive in the setup. My hard disk is SATA 1, I don't see how to change it in the BIOS setup.
Any advice?

Hackintosh on i7 ASUS P6T Intel X58 part 2

I also tried Boot CD 10-11-12h45.iso (the newest version, beta version) The final error messages are :
USBF: 5.635 AppleUSBUHCI[0X58EC000]::start unable to initialize UIM
Still waiting for root device

These errors occur after I have tried to boot from the Mac OS SL retail disc.

@monsteroydI get the memory allocation error. Should I try the older version? ]Monty[

I had this same issue. I think it is from the cmos checksum error due to booting with an unpatched DSDT. I had to do a power down, cmos reset, re-enable my cmos settings (save these on paper). And the memory allocation problem went away.

@prasys, you said good but nothing after.. does that mean you know what's going on and that you're working on it?

I need to update EFI files AND make a BOOTABLE disk, but no luck.

I apologize if this is covered elsewhere, I did a search, but was unsure of what subject specifically to search for in this case.

I have a dual HDD system with Windows on one and Snow Leopard on the other. I am booting off of the Empire EFI CD.

I have installed a new video card and as a result I have updated com.apple.Boot.plist that I need to modify on my EFI CD. However, now when I take the 2 updated file folders and make them into an ISO file and burn them to a CD, I am not able to boot from the CD, it always goes directly into windows instead of the EFI menu.

What step have I missed? I have used 2 different windows based ISO creators and I am burning the ISO disk using Roxio.

Any advice would be appreciated.

dual boot/guid partitioning help

Hey- great work...

Couple issues/questions:

I have one internal drive on my sony vaio (i know they can have issues), and I need to install SL on one partition and Win7 on another.

I tried the SL installation on a separate hfs+ journaled partition but it had to be GUID not MBR (as opposed to my kalyway 10.5.2 I had)…and disk utility would not be able to change the partition to GUID w/o altering the whole HD.

What is the best way to install SL so I can run it in a dual boot mode with windows 7? I will have a USB 8 gig stick if that helps, and will have another USB HD handy as well (blank but wish to eventually use it for shared files w/o OS)

Concerns: Installing SL/WIndows in MBR/GUID...I have only one hard drive to create 2 partitions...from my understanding, an entire disk must be MBR or GUID...

I still have the 10.5.2 kalyway disc if its easier to install this way...

USB shows as HD

Hey! I tried empire efi 1.08 today, both legacy and normal and it saw the drive as HD. I don't have ACHI mode on my bios if im right. I got AMI bios. So what I should do, got intel core 2 duo processor, nvidia 8800gt. Should I maybe try older version or something?

@InteliMacProI had great success with the hardware in my sig. Only thing was i had no video using the gtx260 so i had to put in my old 8800gs for the install and then swap in the gtx260 and follow PCwiz's guide to get it working. If we can find a way to get the gtx260 working in vesa for the install it would be awesome. Swapping it out sucks.

hi do you have any suggestion of any other way to install using my gtx260?
after putting in the snow leopard disk and after sometime, my screen turned black.. any solution for this? thanks

I don't but I've been meaning to get my dsdt and video bios dump to Prasys to try and get it working using the boot disc. I looked into it awhile back but didn't get very far. I'll do that this weekend.

Ok Prasys, I'm working on that NVEnabler thing. Let me know if you still need that and my dsdt. I'm assuming I need to take out the graphicsenabler option in chameleon to use the enabler, correct? I don't have any other injectors or efi strings that i know of.

Also wanted to add that I tried booting using 1.085 and it shuts my computer down right before the OS loads. FIrst one that hasn't worked for me (other than the gtx260 issue, of course).

Must I use 10.6 retail or will a 10.6.2 retail also work?

OK, question…

I need an answer here. Is my following post
a: horribly written
b: am I an idiot for asking, or
c: is it something no one knows the answer to?

I have been posting this question around the net at various sites and can not get a reply from anyone. And I am seriously stuck.

I can burn the modified files onto a CD, it just will never boot when I do.

rt

@traylor1I apologize if this is covered elsewhere, I did a search, but was unsure of what subject specifically to search for in this case. I have a dual HDD system with Windows on one and Snow Leopard on the other. I am booting off of the Empire EFI CD. I have installed a new video card and as a result I have updated com.apple.Boot.plist that…

Either you are making a data cd or the writing software is messing up. I stay clear of roxio anything, but that is just me, Try imgburn from imgburn.com. It worked great for me. an ISO is a disk image, so when you look at the cd after burning, do you see the .iso file? if so, that is a data cd - not what you want. after burning the .iso you should see what was inside the .iso on the cd. Make sense?

]Monty[

monsteroyd:

Thanks for the reply! This version of Roxio has never steered me wrong, but that isn't to say it isn't this time. I have used imgburn in the past at work and it did do a nice job for me. Let me see how it turns out for me.

To answer your other question, after burning, I see the exact same thing that appears on my working CD, before making changes.

Like I said I will try imgburn and see what I get.

Thanks again.

@monsteroydEither you are making a data cd or the writing software is messing up. I stay clear of roxio anything, but that is just me, Try imgburn from imgburn.com. It worked great for me. an ISO is a disk image, so when you look at the cd after burning, do you see the .iso file? if so, that is a data cd - not what you want. after burning the…

Well I tried imgburn and no go. it boots to the CD, but then stops dead in it's tracks without even starting up Empire EFI.

I'm using the "Empire V1.08 (for ATI 48xx series graphics card and nVidia GeForce GTX2xx series along with support for i5/i7 8xx series and P55 chipset)" version of Empire EFI, but I get a kernel panic immediately after all the kexts from the DVD load. Booting with cpus=1 -f -v -x and maxmem=1024 doesn't help at all.

My Specs:
ASUS G60VX
Intel® Core™2 Duo CPU P7450 @ 2.13GHz
Motherboard Chipset: Intel PM45 (Cantiga-PM) + ICH9M (Enh)
Total Memory Size: 4 GBytes
Video Chipset: nVIDIA GeForce GTX 260M (G92-890)
Video Memory: 1024 MBytes of GDDR3 SDRAM
Hard Drive Controller: Serial ATA 3Gb/s
Hard Drive Model: Seagate ST9320423AS
Hard Drive Capacity: 305,245 MBytes (320 GB)
Disc Drive Model: HL-DT-STDVDRAM GT30N
Disc Drive Controller: Serial ATA 1.5Gb/s
Audio Adapter: Intel 82801IB ICH9 - High Definition Audio [A3]
Network Card: Intel® WiFi Link 5100 AGN
Network Card: Realtek PCIe GBE Family Controller

I am getting an error message after the installation started and wondering if it has something to do with the Empire Efi version, the BIOS settings or my SL installation disk.

The message is "The installer could not copy the necessary support files".
In the installer log: "Failed to verify BaseSystem.pkg". It tries three times and than abort the installation.
A couple of tries before it stopped at verifying the BSD.pkg package.

Im tried the installation with the DVD, but got only Ebios timeout errors, so now I am using Empire Efi and an USB-stick.

The installation hard drive is partitioned and formatted as it is supposed to be.
I also tried copying the packages to the installation disk myself, but still getting the "failed to verify" message.

I tried the earlier Empire Efi versions but got nowhere with them. Just the latest update (empire efi V1085 for intel core processors) brought me to the installation screen, but not any further. I tried the legacy version too.

I also read that I should remove some RAM and so I did. Tried with 8GB, 6GB, 4GB, 2GB, used different slots and so on - didn´t work.

Here my hardware specs:

Intel® Core 2 Quad Q9400 4x 2,67GHz 6MB Cache 45nm
nVIDIA GeForce 9800GT 512MB
Mainboard ASUS P5QL-Pro Intel P43 Chipsatz ICH10R
22x DVD/RW Duallayer +/- Multi SH-S223
8GB DDR2 800MHz PC2-6400
500GB SATAII NCQ 16MB Cache 7200rpm

I got no idea, where the problem is coming from (DVD, bios settings, empire efi version)?

Does anyone knoe how to go on from here?

Thanks a lot for any input.

Backpacker

Prasys, I've been using NVEnabler for awhile now and it seems to be working great. I disabled graphics enabler in my extras boot.plist and it is working better with nvenabler. Using graphicsenabler=y my hdmi input wouldn't work, but it does using nvenabler. I now want to create a custom empire efi disk including nvenabler and the new chameleon rc4 with integrated restart/hardware detection etc. I'll be looking into doing that but if somebody can point me in the right direction I would appreciate it. Also, if anybody has any idea why 1.085 causes my computer to shut down right before the desktop comes up please let me know.

I am trying to load Snow Leopard on my PC using Empire EFI

I get the EFI screen showing the HDD's, insert OSx disk in drive and press F5 to continue, but nothing happens.

Initially I get icons representing the EFI CD, and my HDD's with W7 and Vista on it but not the blank drive.

Then when I insert the OSx DVD and press F5, after about 2 minutes I get Icons for all the HDD's inc the blank drive but I cannot select the blank drive and the CD icon has disappeared!

Legacy EFI | Sudden Reboot

My hardware would be:
* Mainboard | MSI MS-7204 Ver: 1.A
* CPU | Intel Pentium D 3.0 GHz
* RAM | 2 GB 667 MHz DDR2 SDRAM
* GPU | Nvidia Geforce 8600 GT 512 MB

So, at first I tried the regular V1.08 and I got the sweet "Memory allocation error".
Then I thought, why not try the Legacy Version for once. And, in fact: The boot menue came up successfully and I changed the disk in the drive.
Fenomenal, even that one was regocnized. With full motivation I chose the disk on the screen ... and then ... well ... BAAAAM! ... the PC just simply rebooted. A very warm welcome to Windows XP. Woohooo. Well, that wasn't quite what I expected...

I hope at least someone of you got an idea, how I'd get on.

Greetings,
Dan

Ok I have progressed a little further... it is all in the timing!

You MUST wait 10 -20 seconds before loading the SL disk after ejecting the Empire EFI disk.

You MUST wait the 30 -60 seconds before hitting the F5 key after loading the SL disk.

failure to do so caused system hangs requiring reboots

Now I am getting the Mac OS to start loading then gets to a point where its says "still waiting for root device"

I am now trying to tweak the bios to get things to progress...

BTW my system specs are:-

• * Mainboard | GA EP35-DS3R Ver: 2.1
• * CPU | Intel E8400
• * RAM | 4 GB Kingston HyperX PC6400
• * GPU | ATI HD4850 512MB

ok...i almost been able to install with 1.085

the two version for amd of 1.08 did not work for me...(waiting for root device).

im able to partiotion in guid
and install up to a point(the blue blue bar goes up to the middle).
then it stops and says install failed.

from there i dont know how to help you or get the crash report or what ever you need...youll have to have patient and help please.

For my dell

Dell Studio XPS 1640 with Radeon HD 3670
Core 2 Duo P8600 (2,4GHz - 3Mb - FSB 1066 MHz)
RAM 6 Gb DDR3 1066 MHz - HDD 320 Gb - DVD +/- R/RW DL
VGA ATI HD 3670 512 Mb Dedicated - LCD 16 ”
WIFI N - LAN - WEBCAM - eSATA - HDMI - MIC

which empire efi version can you recomand me?

where is he

where is Prasys? my last post was more than a month ago, but yet there is no news of this guy.. and since then, there have been more people with their problems.. where are you Prasys? we need you..
if he's not around, then does any one else know how to solve the "Still waiting for boot device" error?

Waiting for root device error only affects married HDD's...

Make sure you have AHCI set in your bios... Pretty sure that resolved my "waiting for root device" error but cause BSOD with my Win installs..

had to "fix" that with a registry edit... post if you need details

I now have a bootable SL OS but no sound, sleep lock ups, and basic VGA resolution... still working on it though.

first time poster here. So I attempted to install SL10.62 using EFI Empire 1.85RC2 and the x58-patched version 1.06. I've tabbed after detecting the disk, and added GraphicsEnabler=Y PciRoot=0 on the 1.85, and also tried -pci0 with the 1.06 x58-patched. However both disks gives me the same results. I also enabled AHCI.

At the end, I get an error message stating:
"Patched DMI Table
ACPI Table not Found: DSDT.aml
Starting Darwin x86
Press any Key to Continue…"

Upon pressing that I get to a screen..attached picturelink...

It would be great if you could help me!

System:
EVGA x58 SLI
Intel i7 920
EVGA GTX260

same thing like dnguyen1022 !

but I'd tried the " Empire EFI V1.085 R2 (For Intel laptops with Intel onboard graphics card such as GMA 950 , GMA X3100 and as well as for desktop computers with problematic nvidia graphics card (i.e 2xx series) and ATI graphics card) " as well !

I got this -> NO DSDT found using 0 as id value
efi_inject_get_devprop_string NULL trying stringdata
Loaded HFS+ file [Extra/smbios.plist] 416 bytesfrom 42521fo
Patched DMI table.
NO DSDT replacement found. Leaving ACPI dara as is.
Starting Darwin x86
Press en key to continue…

followed by an instant reboot !

Intel I7 920
EX58 Gigabyte UD5 F7
Ati Radeon 4870

@dorenthesame thing like dnguyen1022 ! but I'd tried the " Empire EFI V1.085 R2 (For Intel laptops with Intel onboard graphics card such as GMA 950 , GMA X3100 and as well as for desktop computers with problematic nvidia graphics card (i.e 2xx series) and ATI graphics card) " as well ! I got this -> NO DSDT found using 0 as id value…

I get the same error and i am using the amd version of empire efi

@InteliMacProAlso wanted to add that I tried booting using 1.085 and it shuts my computer down right before the OS loads. FIrst one that hasn't worked for me (other than the gtx260 issue, of course).

I tried empire EFI per your suggestion in the other thread, using the latest one on his site (1.085) and I get this exact problem. Seems to install fine (I do get the install failed but that's supposed to happen), then when I restart and boot from the disc and select my installed HD, it says some stuff and shuts down the computer.

edit:

that said, GraphicsEnabler=Y PciRoot=0 does let me use my gtx260 to run the installer.

Also I just realized I tried with the standard release instead of the R2. Going to try the R2 now.

R2 worked, I managed to successfully install SL.

Now I'm having a helluva time getting it to boot normally. I tried to switch my refresh rate in System Preferences to 120hz (I have a 120hz monitor which is great but not so much if it won't be using 120hz), but when I clicked to apply the screen went all crazy with static and I had to reboot. Now it will only boot from Empire EFI in safe mode.

I have installed Chameleon rc4 and I can get it to start booting from the HD, but it hangs at something about AppleRTL8169Ethernet: phyWaitForAutoNegotiation TIMEOUT, sometimes adding NVDA50 something or other.

So for now I am stuck booting in safe mode from a CD but at least it's running.

Yeah I'd leave it at 60hz. I think it mentions it in the first post but there's a site called kexts.com or something like that where you can find a kext to get your internet working.not sure why it's giving you a kp unless you installed conflicting kexts. Internet worked oob on mine, but I needed a lexy to get bonjour working. If you installed a networking kext try it again with vanilla and see if it kp's on you. Safe mode's a good start though. Nice work.

First time poster here and wow, I have never felt like such a noob before in my life.

System Specs:
AMD Phenom II 965 BE C3 (OC: 3.6 GHZ)
MSI 790FX-GD70
Crucial Ballistix 1600 MHz @ 7-7-7-21-28-1T
2 OCZ Vertex 30GB SSD (Running W7)
1 WD Caviar Black (4 Partitions - Primary Mac Dedicated)
2 ATI HD 4890 in CrossfireX x16

First off, I'm not even sure how to begin my process here. I've downloaded Empire EFI, and several kexts as have been suggested for my setup, but that's about as far as it gets.

When I burn the ISO onto a disk, and I run EFI. Loads, put in my retail 10.6 disk, Darwin loads, then, almost instantly I get kernel panic.

panic(cpu 0 caller 0x001A8FFD): Kernel trap at 0x0019a8c2,type 14=page fault

debugger called: <panic> backtrace (CPU 0), Frame : Return Address (4 potential args on stack)

I am pretty much at a stand still. I cannot install at all, once the installer SHOULD load, it shuts down and gives me this instead. I'm really lost, and if anyone would be willing to assist me, please send me a PM. I would greatly appreciate it!

I have a laptop with:
GT240M
I7 720
6gb ram

I try and use the 1.085r2 for the nvidia cards, but no luck, only restarts following the press any key to continue. Any suggestions?

still waiting for root device

i tried a lot with this Empire Efi but nothing worked for me, i tried v1.08, v1.085 and even the modified tuned version for x58 motherboards but still no result
when i say no result, i mean it gets stuck with a message that says:
'Still waiting for root device'
'Still waiting for root device'
etc
etc
anyone have any idea what to do here? i'm stumped :

Noone here has any answers. I've come to find most of these "help" sites are pretty worthless.

I'm installing OS:X with Empire Efi and when it finally is at 100 % it says it can't restart the disk and that I have to manually use StartUp disk tool.

In this tool I get this error:

The bless tool was unable to set the current boot disk

anyone ideas or suggestions?

I'm using the latest one (the second AMD version on the page) and a 10.6 retail install DVD on a Phenom II X4 940, with 8gb of RAM. I'm getting a kernel panic. EmpireEFI works fine but when I put my disk in and boot it up it goes to a kernel panic without any kind of graphical screen. Here's a picture of the screen (z machines.com/zacs_files/kernelpanic.jpg) (phone camera, sorry). What can I do?

I also have a phenom II 940 BE with 4gb of ram on a Gigabyte GA-MA78GM-US2H mb. I have my mb set to ahci mode with a sata dvd drive. I have PATA disabled in the bios. I am getting this error. I used the 1.085r2 of empire efi. Once I press any key after empire efi is ready to launch from the 10.6 installation disc i get this error.

Praysys, Thanks for putting out empire efi. Really appreciate it.

I am using the 10.85r2 i7 version of Empire EFI.

All is working for me.Originally built my system with a ide dvd drive and could not boot. empire efi boots fine for me via sata and usb dvd.

Here are the specs.

MB: Gigabyte GA-EX58A-UD3R Rev1.0 (BIOS F3) PSU: Antec EarthWatts 500 Case: 4u RackMount CPU: Intel Core i7 930 (2.93 GHz) + Zalman CPNS 9700 NIC: On Board
RAM: 6 x 2GB Corsair Dominator DDR3 1600 GPU: GeForce GTS250 1024mb
Bootloader: EmpireEFI OS: 10.6.3 Kexts: (/E/E -> fakesmc framebufferdisabler legacyappleRTC_32bit_only nullcpupowermanagerment openhaltrestart PlatformUUID) (/S/L/E -> None) DSDT: (not yet)

HP DV4 1301TX - installing halfway 29min FAIL

i am using empire efi , i have tried all the versions of empire efi for Core 2 duo
( Total of 4)
including the legacy , i have used much CDs!

Specifications :
HP DV4 1301TX
4GB DDR2 RAM
G105 NIVIDIA GRAPHICS
CORE 2 DUO 2.4GHZ

Bios : insyde Bios (does not allow me to change HDD setting from SATA to AHCI mode- NOT SURE IF THIS STEP IS NEEDED)

no problem booting SL DVD ,
PROBLEM : when installing halfway the installation just hangs and told me it fails , i can hear the disc drive not spinning anymore , after 1/8 of the bar has loaded
thanks

I already have one hackintosh with empire efi and now would like "emperify" my acer revo too.
Unfortunately I don`t have an external dvd reader &I don`t know how too boot empire efi from usb...
I`ve tried to follow these instructions ↗ but with no succes..
after I restore Empire efi to the partition I can`t get it to boot.
the diskutil list shows like this:
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *320.1 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_HFS snow 42.4 GB disk0s2
3: Apple_HFS seven 36.8 GB disk0s3
4: Apple_HFS store 240.3 GB disk0s4
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *8.1 GB disk1
1: Apple_HFS Empire EFI 100.0 MB disk1s1
2: Apple_HFS Mac OS X Install DVD 8.0 GB disk1s2

How can I do it?

Hi, I'm currently having problems with installing Leopard / Snow Leopard via Empire Efi. When i'm told to press any key to continue it goes in but the dvd drive doesn't start up and after some time it shows "still looking for root device". I've tried to connect the drive to different SATA ports but i still get "waiting for root device" and it doesnt start to read the disk.

I've also tried booting from a PATA drive but doesn't work either, also tried to turn on and off AHCI mode but to no help.

Motherboard is Gigabyte EP45-DS3 with Intel Core 2 Duo E6750

Any solution on how to get it to work?

this is what I'm running

MB: M2N68-LA
AMD 64 x2 dual core 4400+ 2.3GHZ
PCI Gforce 8600 GTS
3gig Memory
need more just ask...

I loaded Empire EFI 10.6.3
I'm using a retail snowleo 10.6.3 usb flash install image

I get all the way up to the Language selection, my mouse moves but nothing happens when I click the next button, or enter.. it just sits there.

The mouse is using USB and keyboard is ps2. I am going to try another run today replacing my keyboard with a usb one.

i already have retail snow leopard and the amd empire efi.
when i choose install osx its goes to the loading screen and just keeps loading i left it on all night and it was the same.
how can i fix this?

Recently with a legacy empire efi I have been able to get to the install screen but my hard drive is not present for install, nor is it present in disk utilitiy.

I think my mb/proc combo isn't a great candidate for this. So I'm thinking of replacing the motherboard/proc.

any suggestions on a hardware combo I can pick up from pricewatch ?

EmpireEFI Site Gone

I haven't been able to get on the EmpireEFI site for a few days. Is it going to reopen soon?

Tom L

EmpireEFI and Core i7980X

I installed a retail OS X 10.6.3 disk using EmpireEFI when my Dell Studio XPS 9000 had a Core i7 920 in it and everything worked perfectly. I upgraded the computer to a Core i7 980X and then my TOD clock was running way too fast and MP4 videos weren't synced with the audio. I figured a reinstall would fix the problem. Well I backed up all my data, reformatted the hard drive and tried to reinstall but now I can't boot from the retail disk. Is there any way to do it? I'm using Empire EFI 1.085 R2 and I can't seem to get to your site to download any other version now.

Tom Lake

Unable to Boot Core i7 980X

I solved my problem by finding iBoot installer.

Thanks to all who tried to help me.

Update: I recently installed an nVidia GTX 470 and even iBoot doesn't help. 8^(

Memory Allocation Error

I'm hackintoshing a Intel DM510 motherboard. Whenever I load my 10.6.0 retail disc, I get a memory allocation error. I'm using a 1.085 Empire Efi.

First of all, I come ... and then congratulate prasys for their excellent work.
I'd like to ask some questions. I have an Asus motherboard P5KPL/EPU with 2x2 GB Ram. Once loaded the operating system, I see that you are only using 1GB of memory. If I look advanced, I can see that the system recognizes the two memory modules and gives as correct, but still only uses one. Asking in various forums, have told me that is a common problem, but have not found way to solve it. I would be grateful if you could guide me a little to solve the problem.

On the other hand, I would like to consider a couple of suggestions to include new versions of empire.

The first is that aside from being able to download iso format, were to put a special version to install on USB devices that were compatible with software to create bootable USB devices, style unetbootin, usBuntu, etc.

The reason for the request, it is much more practical to start the operating system from a USB memory from an optical drive, other than that there are many computers that do not have it. It would also be very useful to be able to customize the behavior of the application, because users may make various changes to the program that would be recorded on the USB drive.

The second request is that you include a small application to install on Mac, Linux or Windows that simply check online updates of Empire, myHack, etc, and download them automatically. I think it would be very useful to keep up with people who do not have much time to make these checks.

I can't wait for the nVidia version! I tried the Generic and ATI versions. They both let me choose the language and partition and format a drive but when I get to the actual install screen, it shows 33 min. remaining then down to 30 min and an error occurs every time (both Generic and ATI). I'm using a Retail 10.6.3 Box Set DVD.

Intel Core i7 X980 CPU 3.33 GHz, nVidia GTX 470, 24 GB DDR3 RAM, three 2 GB WD SATA HDs

hello i .

hello. i want to use empire efi to get rid of microsoft for ever so here are my specs: i want to install snow leopard)

Processor: Intel Core i3 350M

Ram: 4GB DDR3

HDD: 500GB

Graphics: Intel HD Graphics

WI-FI: Realtek RTL8191SE
Ethernet:Realtek PCIe FE Family Contoller

Audio: Realtek HDA

Empire EFI v1.85 boot CD settings

I have installed vanilla SL on my laptop using the EE v1.85 (chameleon) CD and as far as I can tell 90% of what should work is working. This includes the battery charging status and the icon in the menu bar.

However, I want to boot from my hard disk not from the EE boot CD so I used myHack 1.1.4 to install the boot loader. This works up to a point but now the battery isn't recognised and a few other nice bits are now gone.

How do I install the EXACT settings that the EE boot CD uses to my hard disk please?

I hope someone can help. I have searched lots of forums but have not found a conclusive answer which is why I am now asking.

what version of empire? help

hey whatsup. so i have been reading prasy's blog top to bottom and am having a hard time deciding what version of empire efi to use or even if i can use it. …

specs: inspiron 6000 laptop

intel pentium m 740 1.6ghz

intel 915 gm/pm chipset

1.5gb ddr2 ram

graphics- ATI MOBILITY RADEON X300 PCI Express

i am currently working with a friend to put snow leopard on his newer i3 laptop and we're in the process of burning the o.s dvd, but i'd like to put it on my pentium m 740 if possible without too much trouble. if there is a version that i should use over the others of empire for my specs and someone could post a link that'd be great and i would appreciate it.

i'm just having a hard time finding out which version will work. any other tips or tricks given would be appreciated.

I would suggest trying iboot. I haven't checked in the last few months but the last thing I read from prasys sounded like he wasn't going to continue with empire. I could be wrong though. Good luck!

Not sure if this is proper protocol, so please correct me if I'm wrong... I posted this query at the VirtualBox forums, but I got slapped down for talk of hacking. I cleaned it up over there, but who knows if I'll get any insight w/o providing more details. So, here goes...

I am trying to move a Mac OS X Server 10.6 VM from a "hacked" Windows Vista Athlon PC host to a "proper" Mac host, but I'm having trouble at boot. I initially got the VM installed and running using the EmpireEFI4AMD ISO, then ran the default install of MyHack from the disk image. While this worked fine on the PC, I cannot get it to boot on the Mac. I have inspected the VM w/ VBoxManage "showvminfo" and compared it to another, earlier version of the VM that _will_ boot on the Mac, but I don't see any obvious discrepancies (although perhaps someone could focus my search). I think the problem may be w/ some EFI settings, as I get the following when booting:

EFI Shell version 2.10 [1.1]
Current running mode 1.1.2
Device mapping table
blk0 :BlockDevice - Alias (null)
PciRoot (0x0) /Pci(0x1F,0x1)/Ata(Secondary,Master,0x0)
blk1 :BlockDevice - Alias (null)
PciRoot (0x0) /Pci(0x1F,0x2)/Ata(Primary,Master,0x0)

and then I get the "Shell>" command.

I have one IDE device configured and pointing to the built-in SuperDrive. The VDI is configured as a SATA device. Any ideas where to look here? Would it be something in my Mac OS X System software, or a VM setting outside the OS?

Thx,
Fred