Hi. I installed 10.7.2 through Snow Leopard using iATKOS L2 and installing to a separate partition and replacing the kernel. I have an AMD Phenom 9850 BE. I have read that my processor isn't even supported at all yet I can run the operating system fine, with the exception of a couple of problems. After the operating system has been running for a while, say 20 minutes, the stock applications do not launch. They sit bouncing on the dock forever until I force close them. Another problem is about the same time finder will not do file operations. When the window for say copying comes up it just sits there at copied Zero of XX.MB. I also cannot update to 10.7.3 or 10.7.4, I cannot boot if I do.

http://osx86.co/f100/10-7-4-amd-kern...html#post57996

Sorry, should have done that to begin with.

CPU: AMD Phenom x4 9850 Black Edition
Motherboard: Gigabyte GA-MA770-UD3 Rev. 2
Memory: 6gb DDR2 800
Video: ATI Radeon HD 4850
HD: 1 TB SATA, 80gb SATA
Sound card (only have for os x): Diamond XtremeSound 5.1

anything else you might need to know?

take a picture and put that in here, there are different error messages

what chipset you have taken the installalation LION?
I took VIAATA.kext ----> S / L / D and extra / e /

I have this Gigagyte GA-990FXA-UD3 board

My chipset is AMD 770. I will give VIAATA.kext a try.

Glad to see some progress down here.

---

My Hardware
CPU: Intel Celeron G530
Memory: 4.00 GB DDR3 1333Mhz
Graphics: NVIDIA GeForce GTX 550 Ti
OS: Mac OS X Lion 10.7.4 - Vanilla kernel
Motherboard: Gigabyte GA-H61M-D2-B3

thanks gils and wastez...
i have updated chameleon to build 2.1 r1927 now it lets me boot lion .............
but stucks on hdd partition ntfs version 3.1..........

here's the screenshot


i forgot to mention.............i am using guid partition table and snowleo works fine on it

C'est ta CG qui bloque , essayes PCIRootUID=1

---

Macmini early 2006 /blanGsak 10.7.2
Acer 8930 G / core2duo T6500 / NV 9600 GS m / Lion 10.7.3 / ML 10.8.2 / w7/8
Asus M5A97pro / FX 8350 / Asus HD 7950 CUII v2
GA-78LMT SP2 / FX 6100 / P x4 960t / Sapphire HD 4850 1024
MSI K9neo v1 / Atlon 4800+/ Gigabyte HD 5450 512
test kernel 12.0 AMD

Tuto : http://www.hack-my-mac.fr/index.php/...fx-buldo#28896

CG opérationnelle : HD 5450 512 / HD 4850 1 / GT 610

probably with your system the FakeSMC.kext is loaded or it is not installed. Importantly which you installed the correct version and which installation place. If you start Lion with usekernelcache=yes, also the Kexte must lie in /S/L/E, since otherwise Lion ignores the drivers in /E/E. If you with usekernelcache=No start then must all drivers in S/L/E lie!! If your system to the same places stops then deletes intelcpupowermenagment.kext from S/L/E and takes the SleepEnabler: kext with nullpowermanagement.kext then it should actually start. I had also had the same problem

---

Mainboard:
GA-990FXA-UD3
Realtek PCIe GBE Family Controller
Realtek High Definition Audio
CPU: AMD Phenom II X6 1100T
RAM: 16 GB Corsair DDR3 1600 C9
NVIDIA Geforce GTX 550 TI 3072 MB
DVD SATA
HDD:
Segate 2 TB
WD 320 GB
WD 500 GB
-----------------------------------------------------
Windows 7 Ultimate 64-Bit
Snow Leopard 10.6.8
Lion 10.7.2
Lion 10.7.4

HOW-TO look here

as told i tried this
boot: -legacy -v PCIRootUID=1
didnt worked, still same problem