#1
|
|||
|
|||
No luck with my AMD-system? What release?
Hey mates,
I am new here and would like to startwith a questin right now. I downloaded 2 releases fr my AMD-system, Hazard 10.6.2 and SnowOSX 3.6A. But nothing does work. [same problem if booting with -v arch=i368] Hazard shows this in verbose mode: SnowOSX just reboots, when I want to boot the DVD, it loaded these HFS+-Drivers. Then the line: Starting Mac OS X (or similar) is displayed for less than a second before it reboots. What to do? I just detected "UniFlash 1.0" - Is that worth a try for me? My system: CPU: AMD Athlon 64 X2 5000+ MOBO: Gigabyte GA-MA770 DS3 RAM: 4GB MDT DDR2 800 Ram GPU: GeForce 8800GTS Thank you so much! Last edited by hecke92; 01-13-2010 at 08:33 AM. |
#2
|
|||
|
|||
Could you provide your hardware specs? but is probably seems like a wrong chipset driver installed or nothing installed(sata and pata )
Which drive you are trying to boot ? Sata or ide ? There is one drive already detected while booting but doesnt your boot partition i think. |
#3
|
|||
|
|||
Thanks mate, I added my hardware specs to my first post.
I am trying to boot form my S-ATA II-Drive as I don't have another one. |
#4
|
|||
|
|||
Actually i am using 790gx chipset and not selecting any chipset driver just set achi in bios for your hardrives otherwise you have to use atiata.kext if you select ide in your bios but not a via-ata.
This should fix your problem. But firstly you should try achi. |
#5
|
|||
|
|||
Thanks mate.
But don't get me wrong. I don't reach the install-screen, I cannot even boot. But I tried AHCI and I still have got the same problems |
#6
|
|||
|
|||
Could you try to clean install when you boot installation dvd and installer appears open disk utility than tell me there is a your drive appear ? if yes dont select any chipset driver than re install it will be fine i think.
|
#7
|
|||
|
|||
Thanks, but the installer doesn't appear for me. I tried a retail disc with Empire EFI, but it also says "waiting for root device"
|
#8
|
||||
|
||||
He needs to inject a chipset kext into the DVD for it to work.
00010 RETIRED |
#9
|
|||
|
|||
thanks, but now I am getting a kernel panic
Last edited by hecke92; 01-14-2010 at 02:33 PM. |
#10
|
|||
|
|||
I'm having this same issue. I've downloaded Hazard from numerous areas thinking maybe it was the ISO. But apparently not, last thing I see is "Starting Darwin" and then the screen resets and the computer begins to reboot, don't even have the chance to see disk utility. I've tried -x -cpus=4 -busratio=20 -force64 and no luck.
I currently have Lawless PPC running smoothly on my system, but would really like to have Snow Leopard running. How can I check in my current install what chipset kext is working and inject it into this DVD? would that work? Please help! Thanks 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. HP Pavilion p6230f with 64-Bit AMD Phenom II x 4 810 2.6ghz
8GB DDR3 RAM Mainboard: Foxconn / Chipset: AMD 785GX, Southbridge: ATI SB750 EVGA GeForce 9500GT 1GB - Working with Dual DVI and Two 20" Widescreen Monitors 750GB Seagate Barracuda SATA Realtek HD Audio - Working! Atheros Wireless Card - Working! Dual Boot: Lawless PPC 10.5.4 Hazard Snow Leopard 10.6.2 (Working on a Tri-Boot with Win7) |