#1
|
|||
|
|||
Q6600 is detected as a single core
I just installed Kalyway 10.5.2 on a GA-P35 Ds3L / Q6600 / 4gb RAM system; all's well except that the Q6600 is detected as a single core CPU. I had set up Kalyway on my other GA-P35 Ds3L just a couple weeks ago, pretty much identical machine yet it's Q6600 is showing correctly as 4 core. FWIW both are GO step Q6600's OC'd 2.91ghz. I don't recall the Options I chose for the setup, should I re-enter the setup via the kalyway disc and select options I may have overlooked, or can I fix this within the present install?
I didn't select any boot options at all, either on this latest GA-P35 Ds3L rig or when installing Kalyway on the first GA-P35 Ds3L machine. Both machines are identical in every way(mobo/RAM/vid etc) hardware-wise, and BIOS settings are all the same: Limit CPUID=disabled No-execute=disabled C1E=disabled TM2=disabled EIST=disabled ACPI=SI PME=Enabled HPET=32 bit Used same Kalyway disc as well. I did try cpus=1 but there was no effect... |
#2
|
|||
|
|||
upgrade to 10.5.8 and try again.
makes no sense to fiddle with 10.5.2. and first of all which kernels did you try? btw light green on a white bg sux |
#3
|
||||
|
||||
Try this bios setting :
Limit CPUID Max. to 3: [Disabled] No-Execute Memory Protect: [Enabled] CPU Enhanced Halt (C1E): [Enabled] CPU Thermal Monitor 2(TM2): [Enabled] CPU EIST Function: [Enabled] http://leopardsoup.pbworks.com/ds3l_bios 10.7 Lion Dev Prev |
#4
|
|||
|
|||
Quote:
Would using "-f" help, or do I need to Edit the Plist? Last edited by hrsetrdr; 08-13-2009 at 03:12 AM. |
#5
|
|||
|
|||
plist entry would do the job.
|
#6
|
|||
|
|||
Update:
Having gotten thus far, I decided to re-try iAtkos v.7 rather than spend the time applying updates to 10.5.2. iAtkos worked beautifully with the correct BIOS settings, now have 10.5.7 on a couple C2D & CQD rigs. A big thanks to Apple, and to all the dev's plus those who posted with help. 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. |