Snow Leopard AppleHDA / HDAEnabler kext help - Page 5

chadp1a · #1 12-15-2009, 03:06 PM

Quote:

Originally Posted by haze295

Thank you so much

... I booted up in Fedora 10 (12 had bad check sum) and run codec0 and 1. 0 as you can see didn't come up but 1 did. I also have my 10.5 apple hda working and my dsdt if you need it.

Couple things I noticed... volume buttons worked moving the volume and speaker icon up top but didn't hear any audio (didn't have anything to test with due to limited files).

Side Note: Linux can't properly shutdown the system either so appearently it's not just a mac issue

Yea the hda kext and dsdt would be of help. Paste the links to them and I'll get them.

haze295 · #2 12-15-2009, 06:03 PM

Chad,

Thank you once again

(truly). I have attached my dsdt for 10.6 (which only gave me 1 warning about a zero value), the original Enabler and AppleHDA from taruga (10.5.x) and i pulled a copy from the 10.5.x drive of applehda JIC

hXXp://rapidshare.com/files/321250795/Archive.zip.html <--just replace the XX with tt
MD5: 150740DA64090A69518401EC1875F06B

chadp1a · #3 12-15-2009, 09:08 PM

Quote:

Originally Posted by haze295

Chad,

Thank you once again

(truly). I have attached my dsdt for 10.6 (which only gave me 1 warning about a zero value), the original Enabler and AppleHDA from taruga (10.5.x) and i pulled a copy from the 10.5.x drive of applehda JIC

hXXp://rapidshare.com/files/321250795/Archive.zip.html <--just replace the XX with tt
MD5: 150740DA64090A69518401EC1875F06B

Hey.. let's try

cat /proc/asound/card0/codec#2

in fedora

lemme know. thanks

haze295 · #4 12-16-2009, 02:54 AM

Bazinga!!!! :d

Quote:

[liveuser@localhost ~]$ cat /proc/asound/card0/codec#2
codec: Idt 92hd71b8x
address: 2
vendor id: 0x111d76b0
subsystem id: 0x107b0692
revision id: 0x100101
no modem function group found
default pcm:
Rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: Pcm
default amp-in caps: Ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
default amp-out caps: Ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
gpio: Io=8, o=0, i=0, unsolicited=1, wake=1
io[0]: Enable=1, dir=1, wake=0, sticky=0, data=1
io[1]: Enable=0, dir=0, wake=0, sticky=0, data=0
io[2]: Enable=0, dir=0, wake=0, sticky=0, data=0
io[3]: Enable=0, dir=0, wake=0, sticky=0, data=0
io[4]: Enable=0, dir=0, wake=0, sticky=0, data=0
io[5]: Enable=0, dir=0, wake=0, sticky=0, data=0
io[6]: Enable=0, dir=0, wake=0, sticky=0, data=0
io[7]: Enable=0, dir=0, wake=0, sticky=0, data=0
node 0x0a [pin complex] wcaps 0x400183: Stereo amp-in
amp-in caps: N/a
amp-in vals: [0x00 0x00]
pincap 0x081c: Out hp detect
pin default 0x0321101f: [jack] hp out at ext left
conn = 1/8, color = black
defassociation = 0x1, sequence = 0xf
pin-ctls: 0xc0: Out hp
unsolicited: Tag=30, enabled=1
connection: 3
0x10 0x11* 0x17
node 0x0b [pin complex] wcaps 0x400081: Stereo
pincap 0x081724: In detect
vref caps: Hiz 50 grd 80
pin default 0x03a11020: [jack] mic at ext left
conn = 1/8, color = black
defassociation = 0x2, sequence = 0x0
pin-ctls: 0x24: In vref_80
unsolicited: Tag=00, enabled=0
node 0x0c [pin complex] wcaps 0x400081: Stereo
pincap 0x081724: In detect
vref caps: Hiz 50 grd 80
pin default 0x40f000f0: [n/a] other at ext n/a
conn = unknown, color = unknown
defassociation = 0xf, sequence = 0x0
pin-ctls: 0x00: Vref_hiz
unsolicited: Tag=00, enabled=0
node 0x0d [pin complex] wcaps 0x400183: Stereo amp-in
amp-in caps: N/a
amp-in vals: [0x00 0x00]
pincap 0x0814: Out detect
pin default 0x90170110: [fixed] speaker at int n/a
conn = analog, color = unknown
defassociation = 0x1, sequence = 0x0
misc = no_presence
pin-ctls: 0x40: Out
unsolicited: Tag=00, enabled=0
connection: 3
0x10 0x11 0x17*
node 0x0e [pin complex] wcaps 0x400081: Stereo
pincap 0x081724: In detect
vref caps: Hiz 50 grd 80
pin default 0x40f000f1: [n/a] other at ext n/a
conn = unknown, color = unknown
defassociation = 0xf, sequence = 0x1
pin-ctls: 0x00: Vref_hiz
unsolicited: Tag=00, enabled=0
node 0x0f [pin complex] wcaps 0x400183: Stereo amp-in
amp-in caps: N/a
amp-in vals: [0x00 0x00]
pincap 0x0814: Out detect
pin default 0x40f000f2: [n/a] other at ext n/a
conn = unknown, color = unknown
defassociation = 0xf, sequence = 0x2
pin-ctls: 0x40: Out
unsolicited: Tag=00, enabled=0
connection: 3
0x10 0x11 0x17*
node 0x10 [audio output] wcaps 0xd0c05: Stereo amp-out r/l
amp-out caps: N/a
amp-out vals: [0x49 0x49]
converter: Stream=0, channel=0
power: Setting=d0, actual=d0
delay: 13 samples
node 0x11 [audio output] wcaps 0xd0c05: Stereo amp-out r/l
amp-out caps: N/a
amp-out vals: [0x2e 0x2e]
converter: Stream=0, channel=0
power: Setting=d0, actual=d0
delay: 13 samples
node 0x12 [audio input] wcaps 0x1d0541: Stereo
converter: Stream=0, channel=0
sdi-select: 0
power: Setting=d0, actual=d0
delay: 13 samples
connection: 1
0x1c
processing caps: Benign=0, ncoeff=0
node 0x13 [audio input] wcaps 0x1d0541: Stereo
converter: Stream=0, channel=0
sdi-select: 0
power: Setting=d0, actual=d0
delay: 13 samples
connection: 1
0x1d
processing caps: Benign=0, ncoeff=0
node 0x14 [pin complex] wcaps 0x400102: Mono amp-in
amp-in caps: N/a
amp-in vals: [0x80]
pincap 0x0810: Out
pin default 0x40f000f3: [n/a] other at ext n/a
conn = unknown, color = unknown
defassociation = 0xf, sequence = 0x3
pin-ctls: 0x00:
Connection: 1
0x16
node 0x15 [audio selector] wcaps 0x300101: Stereo
connection: 3
0x10* 0x11 0x17
node 0x16 [audio mixer] wcaps 0x200100: Mono
connection: 1
0x15
node 0x17 [audio mixer] wcaps 0x20010b: Stereo amp-in
amp-in caps: Ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
amp-in vals: [0x1f 0x1f] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
connection: 5
0x10 0x11 0x27 0x1a 0x1b
node 0x18 [pin complex] wcaps 0x40000d: Stereo amp-out
amp-out caps: Ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
amp-out vals: [0x00 0x00]
pincap 0x0820: In
pin default 0x90a6012e: [fixed] mic at int n/a
conn = digital, color = unknown
defassociation = 0x2, sequence = 0xe
misc = no_presence
pin-ctls: 0x20: In
node 0x19 [pin complex] wcaps 0x40000d: Stereo amp-out
amp-out caps: Ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
amp-out vals: [0x00 0x00]
pincap 0x0820: In
pin default 0x40f000f5: [n/a] other at ext n/a
conn = unknown, color = unknown
defassociation = 0xf, sequence = 0x5
pin-ctls: 0x20: In
node 0x1a [audio selector] wcaps 0x30010d: Stereo amp-out
amp-out caps: Ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
amp-out vals: [0x00 0x00]
connection: 3
0x0b* 0x0c 0x0e
node 0x1b [audio selector] wcaps 0x30010d: Stereo amp-out
amp-out caps: Ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
amp-out vals: [0x00 0x00]
connection: 3
0x0b* 0x0c 0x0e
node 0x1c [audio selector] wcaps 0x30090d: Stereo amp-out r/l
amp-out caps: Ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
amp-out vals: [0x0d 0x0d]
connection: 4
0x1a* 0x17 0x18 0x19
node 0x1d [audio selector] wcaps 0x30090d: Stereo amp-out r/l
amp-out caps: Ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
amp-out vals: [0x80 0x80]
connection: 4
0x1b* 0x17 0x18 0x19
node 0x1e [pin complex] wcaps 0x400301: Stereo digital
pincap 0x0810: Out
pin default 0x044513a0: [jack] spdif out at ext right
conn = optical, color = black
defassociation = 0xa, sequence = 0x0
misc = no_presence
pin-ctls: 0x00:
Connection: 1
0x24
node 0x1f [pin complex] wcaps 0x400701: Stereo digital
pincap 0x0810010: Out eapd
eapd 0x0:
Pin default 0x40f000f8: [n/a] other at ext n/a
conn = unknown, color = unknown
defassociation = 0xf, sequence = 0x8
pin-ctls: 0x00:
Power: Setting=d0, actual=d0
connection: 2
0x24* 0x25
node 0x20 [pin complex] wcaps 0x400301: Stereo digital
pincap 0x0810: Out
pin default 0x90451360: [fixed] spdif out at int n/a
conn = optical, color = black
defassociation = 0x6, sequence = 0x0
misc = no_presence
pin-ctls: 0x40: Out
connection: 1
0x25
node 0x21 [audio output] wcaps 0x40211: Stereo digital
converter: Stream=0, channel=0
digital:
Digital category: 0x0
pcm:
Rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: Pcm ac3
delay: 4 samples
node 0x22 [audio output] wcaps 0x40211: Stereo digital
converter: Stream=0, channel=0
digital:
Digital category: 0x0
pcm:
Rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: Pcm ac3
delay: 4 samples
node 0x23 [vendor defined widget] wcaps 0xf00000: Mono
node 0x24 [audio selector] wcaps 0x300101: Stereo
connection: 3
0x21* 0x1c 0x1d
node 0x25 [audio selector] wcaps 0x300101: Stereo
connection: 3
0x22* 0x1c 0x1d
node 0x26 [beep generator widget] wcaps 0x70000c: Mono amp-out
amp-out caps: Ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
amp-out vals: [0x00]
node 0x27 [pin complex] wcaps 0x400000: Mono
pincap 0x0820: In
pin default 0x40f000f7: [n/a] other at ext n/a
conn = unknown, color = unknown
defassociation = 0xf, sequence = 0x7
pin-ctls: 0x00:
Node 0x28 [volume knob widget] wcaps 0x600000: Mono
volume-knob: Delta=1, steps=127, direct=1, val=127
connection: 2
0x10* 0x11
　

chadp1a · #5 12-25-2009, 05:57 AM

Guys,

I've finally got shutdown working now. As soon as I get sleep working I'll post instructions.

Peace

ps2pk · #6 02-17-2010, 02:02 AM

Here is a bootcd I put together.

It's an .iso so just burn it on a cd or dvd at the slowest speed.

Remember to either have a snow leopard restored on a usb drive or have an actual snow leopard 10.6 disc.

Boot from the bootcd. once at the bootloader take out the cd and insert the dvd or if you have an usb select that (be sure to plug it in before boot).

http://www.mediafire.com/?q4nizy0ftty

Let me know

BoostedH23a1 · #7 10-01-2010, 05:55 PM

any luck with the guide yet?

where can i order another internal hard drive and that wifi card from? part numbers?

BoostedH23a1 · #8 10-02-2010, 01:44 AM

ok, i am at a standstill...

6860 fx
brand new hard drive (2nd one, windows will be on the 1st one)

i have snow leopard disk to work from....(10.6)

after reading all these threads im so damn confused on how to procede, It sounds like i need 10.5 install disk? i dont know
i will try to do a walk through if i can but i doubt it.

edit: ok nevermind. i used a bootdisk from ps2pk and had a snow leopard disk to install 10.6 straight off that, worked great, didnt have to install 10.5 then upgrade or anything like that.
also used a bundle from ps2pk called gateway files, now i have sound and all.

currently working on trying to get it in the options to boot without using the boot cd

BoostedH23a1 · #9 10-02-2010, 05:57 PM

with some help from ps2pk using his bootdisk worked great for the install.
he gave me some gateway file so the keyboard and mouse and sound is working fine.

i thought i was having boot issues but i had to go into bios and make my other hard drive bootable...duh.. now the boot sequence seems to work fine.

-still have issues with shutdown and my webcam is weird. it will light up the "Gateway USB 2.0" webcam and seem like it takes a picture but its all black..
-still have issus with sleep not waking up

all i know of at the moment.