UHCI/EHCI Built in with dsdt fix - Page 5

wwbsox · #1 09-06-2009, 06:55 PM

The ICH9/R (unsupported) didn't change, I just changed the device ID's to those of ICH10 (supported). Just kinda tricking mac OSX into thinking we are running supported hardware.

I have the Jmicron SATA disabled in the bios. Waiting for someone to compile the needed kext for 64bit support. Shouldn't be long as Apple has released SL sources.

As far as the sound assertion errors on boot. I haven't started working on those yet. But I think it is because the layout ID and Pin configs in the DSDT don't match what is in the HDA kext. The kext overrides those values... I think.

Once I finish adding native speedstep (p-states,c-states) to my dsdt, then I will start on the sound.

Snow · #2 09-02-2009, 11:48 AM

Alright guys, will try kDawgs code first since I have the same card, 8800GT, 512MB and dual DVI's in pci-x slot 0 I think (the first)

If this doesnt work out I"ll prob use ACPI patcher, thing is though, this patcher starts all over and I don't want it to mess with the code I already have.

I'll post back with update!

Thx

Update: where would I find the pci location (ADR) in IORegistryExplorer tool?

Update 2: DevicePath = PciRoot(0x1)/Pci(0x1,0x0)/Pci(0x0,0x0) is what GFXutil reports to me. does that mean ADR string should be:

0x101000000

wwbsox · #3 09-02-2009, 01:17 PM

@snow

I didnt want to start all over with my DSDT either. So I generated a dsdt with the graphics and copied the entire PEGP section to my current DSDT with the other fixes.

Also, I'm pretty sure my card showed up in ioreg as a PCI address 1, but when I selected this address in ACPI patcher, it never added it to the dsdt. Had to choose PCI 0.

Snow · #4 09-02-2009, 01:36 PM

Done!

I pasted the exact same code as kDawgs since my ADR was 0x00010000 and not what I thought before.

Thx again all for the help!

Snow · #5 09-02-2009, 01:41 PM

I think I have only 1 issue remaining (until I get me one of those fancy mac keyboards)

I've made my own keyboard layout wit ukelele a long time ago and it matches my belgian point keyboard perfectly but now and then osX decides to load the default keyboard (which is belgian but apple layout)
I've tried removing the bundle from S/L/Keyboard Layouts to block the default load but I think I ran into issues. I don't know if its directly related to the removal or to my dsdt patching etc but I lost my keyboard alltogether.
Now with putting the bundle back in all is fine.

I guess I have to start modding with Quickeys :/

Voyn1x · #6 09-02-2009, 01:45 PM

Thanks for posting this fix!

I played with my DSDT for weeks trying to solve this problem. Up to now i've been using Slices modified IOUSBFamily as a work around.

wwbsox · #7 09-02-2009, 02:09 PM

Quote:

Originally Posted by Voyn1x

Thanks for posting this fix!

I played with my DSDT for weeks trying to solve this problem. Up to now i've been using Slices modified IOUSBFamily as a work around.

Glad it worked for you. Credit goes to the original posters. All I did was consolidate the 2 fixes and put it where you dont have to read through a ton of posts to find it.

EnzoFX · #8 09-02-2009, 09:26 PM

Snow, I also used ACPI Patcher to enable my 9800gt through dsdt, works just fine. Just gotta make sure you get the right settings.

I am wondering if anyone's using this on a P35-DS3L
My usb ports also show up as "Expansion Slot", and only 2 are "High-Speed"
I cannot wake from sleep with kb/mouse. Most importantly however, sometimes my keyboard isn't detected @ startup. In BIOS, I do have kb usb support (Not mouse), which I always wondered if it was related.
EDIT: just checked if I got the "Device Removal" error with a usb flash drive, yup, sure do.

I'd like to try this (Never have edited manually). Why is one device with that specific address left alone?
Attached is my dsdt.dsl usb portion of my file, In case someone wants to speed up my process =P

wwbsox · #9 09-03-2009, 01:07 AM

@EnzoFX

Here you go.

Ianxxx · #10 09-03-2009, 09:54 AM

Quote:

Originally Posted by Snow

I think I have only 1 issue remaining (until I get me one of those fancy mac keyboards)

I've made my own keyboard layout wit ukelele a long time ago and it matches my belgian point keyboard perfectly but now and then osX decides to load the default keyboard (which is belgian but apple layout)
I've tried removing the bundle from S/L/Keyboard Layouts to block the default load but I think I ran into issues. I don't know if its directly related to the removal or to my dsdt patching etc but I lost my keyboard alltogether.
Now with putting the bundle back in all is fine.

I guess I have to start modding with Quickeys :/

The only fix I found for this was to put keyboard layout in before first boot and pick your keyboard when first setting up.