my config is
core duo 2.8ghz
gigabyte mbo intel chipset
ati firegl 5600v

wich iso to download for this config ?

You should be able to try any intel release such as Leo4all, Kalyway, Iatkos, JaS etc. Gigabyte boards are pretty compatible.

I've not heard of your gfx card before so good luck with that

As Voyn1x told you, gigabyte boards are pretty good for OSX. A couple of years ago i had FireGL Z1, pretty obsolete now but at the time it was hell of a workstation graphic card. I was using it with 3dsmax and maya. You should find its radeon chipset equivalent and i'm sure it will work fine. There are FireGL chipset cards run on macs so it will work, np about that. What exactly is your board's name?On many of them you can install from retail mac os x dvd, 10.5 or 10.5.1, and run vanilla, unmodified apple kernel.

Simple question: will the Zephyr 10.5.2 install work with amd phenom quadcore and will leo recognize processor as quad?
Thanks in advance.

as far as i know - it won`t work. for phenom quad core - try LawlessPPC Leopard 10.5.4 dvd, it`s confirmed to work on phenom systems, and it`s based on Zephy`s release.

---

www.ultimae.com
Panoramic music, for panoramic people.

AMD Phenom II X6 3.5Ghz
AMD 990FX Chipset
Kingston HyperX 16GB 1600Mhz
AMD Radeon HD6850 X2 CrossFire
Seagate Barracuda Green 2TB

hi guys,

i'm installed LawlessPPC-Leo-10.5.4-Phenom & AMD, i've problem can you'll solve it. my sound is not working, network detected but i can't connect to internet, already set using manual and connect but using DHCP the ip is different from my modem dsl. first time i installed is working using dhcp but now can't working. my system is :

AMD Athlon X2 3600 +
MSI K9N Ultra 2-F
2 gb Kingston
sata seagate 160 gb ( winxp )
pata seagate 20 gb ( leo )
MSI 7300 gs 128 mb
LawlessPPC-Leo-10.5.4-Phenom & AMD

thanks

Most people miss the customizing button because they are too excited to use OS X on their first time installing.

This is a little more of the info we would need to help you out:
http://www.komplett.co.uk/k/ki.aspx?...ed#ProductTabs

The ALC883 is supported in the installer. you don't need to reinstall though. Simply use MainMenu from Macupdate.com to enable "Show Hidden Files" under the Finder section of the drop-down. Then navigate to the Install DVD and look in the System/Installation/Packages/ folder for the updates you need to enable your computer to work properly again.

For the network issue... just reset it back to manual in the System Preferences -> Network.

Don't forget to "Hide Hidden Files" again via mainmenu.

---

Thanks for your replay, my sound is working now but i still cannot connect to internet. using dhcp always "self assign ip". Set IP manually connect but cannot ping to gateway or router, anyone have another solution.

make sure you don't just assign an IP... you also need to set the subnet mask (usually just 255.255.255.0) and the router. Also, for the DNS servers I use the same IP address as my router and make sure you set the DNS domain to point to your ISP provider.

---

I've just booted up Zephyroth rev 1 release and get to the select destination pane, but it's blank and can't select my hdd. Can anyone tell me what's causing this please? It doesn't show up in disk utility either, just my dvd drive does.

AMD Athlon 64 X2 5000+ Dual Core 2.6GHz
AM2 Gigabyte GA-MA69VM-S2 Motherboard
Asus Radeon 2400 PRO
2GB PC2-6300 800Mhz Ram
Hitachi 160GB Sata II Hard Drive

Thanks!