Hi everybody,

I spent a lot of time to find a solution to my problem. No response at time...

Recently, I downloaded the iPC distrib to get an Hackintosh. My motherboard is a Gigabyte P35-DS3R with the latest BIOS (F13C) and AHCI activated



I boot from my DVD freshly burned (burn at 2x), Darwin come



and I put the -v parameter for verbose mode and... Kernel Panic...




I don't understand where is the trouble. Why HFS detect a runtime corruption ?

My computer configuration :

Intel C2D E6550
Gigabyte GA-P35-DS3R with AHCI activated and latest BIOS upgrade
2x 1Go RAM DDR-II PC6400 Corsair Twin2X
GeForce 8600GTS 256Mo
Asus optical drive/burner in SATA
HDD for Hackintosh : Maxtor 120Go SATA + Maxtor 120Go IDE.
HDD for Windows : Maxtor 250Go SATA + Seagate 250Go SATA

On the boot, only the Maxtor 120Go SATA is plugged, on the JMicron SATA port (violet).

I've missed something ?
Thanks for your help,

Fred

try change Asus ODD to violet SATA port and Maxtor 120Go HDD to an orange port.....

---

Hi and thanks for your suggestion, so

ODD > violet, HDD > orange > same KP
ODD > violet, HDD > violet > same KP
ODD > orange, HDD > orange > same KP
ODD > orange, HDD > violet > same KP

and AHCI still activated in my BIOS config. With "vanilla" parameters, the boot screen prompt me to reboot the computer.

Something is wrong with my ISO ? 'cause I burned it twice, same result...
Thanks.

what's the full name of the iso file you've downloaded?

(it's vald the same mobo guy)

if you have external USB ODD try to use it .... if the same problem comes, you have the bad ISO...we have similar system and i just plugged my external ODD to install my iPC 10.5.6 with vanilla Darwin kernel 9.6.0......but no AHCI

---

Hi Vlad, you're anywhere

It's the iPC OSx86 10.5.6 Universal PPF5 (Final).iso (4.29Go). The checksum of this iso isn't the same of the checksum in the readme file...

Hi Wayang,

I'll try this tonight. I doesn't have an external ODD, but i've an adapter to plug any drive to USB. I hope will work

Hey Fred,
I just wanted you to know that i booted into the install process, didn't do anything with the BIOS settings.. although i don't want to install it with a junk graph card (7100 GS) i have until they give mine back... :/

So I guess it has to be something with the dvd you burned..

Other people on other forums told me that our mobo works perfectly with osx86, and i don't see any reason why it wouldn't work with Intel c2d...

anyway, good luck on the quest

Hi Vlad,

I tested the suggestion of Wayang, I plugged my ODD in USB with an adaptater, no change > KP again and again, AHCI activated or not, voodoo or vanilla kernel.

So you're probably right, my ISO seems corrupted I must re-DL it, with my slow connexion speed (512kbps), I'm really happy...

But I don't remember where I downloaded it (tpb, mininova, demonoid, ... ?). Could you tell me where you have find your ISO ?

Thanks for your support in my quest !

Well i used a specific search engine to find it. Just type in the full name and youll see it somewhere on top of the list. Its 4.3 gb i think. I dont remember if the tracker was pb or dmnd..
i didnt check the checksum but it worked for me