InfiniteMac OSx86  


Reply
 
Thread tools Display modes
  #1  
Old 02-26-2008, 10:15 AM
A_DoNuT333 A_DoNuT333 is offline
Puma
  
Join Date: Feb 2008
Posts: 15
I'm not sure if anyone else has run into this problem. I have just injected AppleOnboardPATA.kext for my sb600 chipset and now this picture is what I get every time it loads. It happens very quickly after boot from dvd so no chance to get to single user mode to remove anything. I appreciate any help. Thanks
Reply With Quote
  #2  
Old 02-26-2008, 10:51 AM
eddie11c eddie11c is offline
Tiger
  
Join Date: Feb 2008
Posts: 261
If there are no drives found to include the PATA drive for your DVD drive you will get this error. The kext you injected most likely is not working as intended.
Reply With Quote
  #3  
Old 02-27-2008, 07:49 AM
A_DoNuT333 A_DoNuT333 is offline
Puma
  
Join Date: Feb 2008
Posts: 15
Bummer, so removing AppleOnboardPATA.kext should solve my problem?

By the way, this kext is supposed to be for my harddrive. As far as I know my laptop DVD drive is IDE. It's a Toshiba Satellite A215.
Reply With Quote
  #4  
Old 02-28-2008, 03:15 AM
scottath scottath is offline
Jaguar
  
Join Date: Feb 2008
Location: Sydney - Australia
Posts: 36
Not going to help, but i have a laptop with the same problem, same southbridge also, any help would be appreciated


💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers.

Gaming Syste, Q6600 G0 @3.6 | Crucial Ballistix 6400 2GB | 200GB HDD | HD4870 | P5E [RAMPAGE BIOS] | Thermalright 120 Extreme with 130CFM+ Sunon 38x120mm fan | CM690 | Dell E248WFP

Laptop - HP Compaq 6715b laptop | AMD Turion64 X2 [2.2ghz] | 2GB RAM | ATI X1250 | ATI RS690 Chipset / SB600 southbridge | 250GB HDD
Reply With Quote
Reply



Archive - Privacy - Top